f3tz3r
Active Member
First of all, i'm located in the south east US, temps here during winter average high 20s to mid 30s at night, and mid 40s to 50s during the day. Summers variate alot, but i haven't had the growroom in the summer, so i'm not sure how well the floor vent would work with a HID light during the summer.
Whats going to be installed this weekend.will be a 6in 250cfm fan that exhausts air from the top of the room into the attic. The exhaust will be through a DIY carbon filter (Not sure if it will even provide odor control, See below). Then air will travel through 250cfm fan. And finally the air will exit the ducting through another filter and into the attic. I have vent into the grow room floor that is open to under my house. There is usually cool dry air under there, as you will be able to tell in the pics of the thermo i'm using. There will also be cracks for air from the rest of the house to enter the grow room.
2x 23.8" x 20.5" x .2" carbon pre-filter from lowes
6in aluminum ' T '
2' wide chicken wire
2x6" aluminum caps.
Run a loop of the chicken wire around the ends of the ' T ', putting caps in each. Then wrap the carbon filter around the chicken wire.
Given these conditions, would anyone have any advice as to which size light i should go with, or start with better ventilation, or maybe even odor control. I believe i'm fixing to have some reeking shit on my hands, and dont wanna end up blowing it on smell. I'd reek out my house and keep everyone out for 2 more months if needed, lol.
Whats going to be installed this weekend.will be a 6in 250cfm fan that exhausts air from the top of the room into the attic. The exhaust will be through a DIY carbon filter (Not sure if it will even provide odor control, See below). Then air will travel through 250cfm fan. And finally the air will exit the ducting through another filter and into the attic. I have vent into the grow room floor that is open to under my house. There is usually cool dry air under there, as you will be able to tell in the pics of the thermo i'm using. There will also be cracks for air from the rest of the house to enter the grow room.
2x 23.8" x 20.5" x .2" carbon pre-filter from lowes
6in aluminum ' T '
2' wide chicken wire
2x6" aluminum caps.
Run a loop of the chicken wire around the ends of the ' T ', putting caps in each. Then wrap the carbon filter around the chicken wire.
Given these conditions, would anyone have any advice as to which size light i should go with, or start with better ventilation, or maybe even odor control. I believe i'm fixing to have some reeking shit on my hands, and dont wanna end up blowing it on smell. I'd reek out my house and keep everyone out for 2 more months if needed, lol.