What's your favourite setup?

H

hookd

Member
fir3dragon said:
the carbon scrubber goes inside your tent and sucks all the air out. so it will prevent that from happening. you would need some sort of intake though to suck air into the tent.
Click to expand...
Is this where the flex duct comes into play? I'll admit I don't understand how an intake would work.. :roll:
 
fir3dragon

fir3dragon

Well-Known Member
hookd said:
Is this where the flex duct comes into play? I'll admit I don't understand how an intake would work.. :roll:
Click to expand...
its very easy but ill explain how i would do it

put the inline fan, and the carbon filter inside your tent wherever there is room. that will suck air in and blow it out of the other side of the inline fan. Put the flex duct on that side and run it up to the light. then take that booster fan i posted, put it on the other side of the light and put flex duct on the other side of the booster fan out of the tent outside or wherever
 
H

hookd

Member

"This series is designed for installation in ducts. All fans are a series of centrifugal duct fans with the advantage, typical of axial fans, to convey air along the same axis of the impeller." 125mm 322m3/h

Would this be an alternative to the fan you posted? It would fit the flex duct.

Thanks you guys, enlightening indeed:)

EDIT; disregard.. My pic didn't get posted up..
 
fir3dragon

fir3dragon

Well-Known Member
hookd said:

"This series is designed for installation in ducts. All fans are a series of centrifugal duct fans with the advantage, typical of axial fans, to convey air along the same axis of the impeller." 125mm 322m3/h

Would this be an alternative to the fan you posted? It would fit the flex duct.

Thanks you guys, enlightening indeed:)

EDIT; disregard.. My pic didn't get posted up..
Click to expand...
link? that pic isnt showing
 
0calli

0calli

Well-Known Member
you want the carbon filter outside the tent dude
fir3dragon said:
its very easy but ill explain how i would do it

put the inline fan, and the carbon filter inside your tent wherever there is room. that will suck air in and blow it out of the other side of the inline fan. Put the flex duct on that side and run it up to the light. then take that booster fan i posted, put it on the other side of the light and put flex duct on the other side of the booster fan out of the tent outside or wherever
Click to expand...
 
0calli

0calli

Well-Known Member
no such thing as overkill look at my closet 6-8 plants 1000w and dank as fuck i pull atleast close to 2 lbs wet per plant
fir3dragon said:
i think buying a 1000w would be overkill unless your going to do 20 plants or so. i think that walmart fan would work but if not you could get http://www.amazon.com/Lasko-6-Inch-2-SPEED-White-Clip/dp/B000QOMZT4/ref=sr_1_1?ie=UTF8&qid=1326084338&sr=8-1

you said you were wanting 2-4 plants. what i listed above is enough. and the booster fan goes on the other side of the light to push the air through from the carbon filter over across the light etc.. you need to study more about this stuff.

EDIT- sorry hookd, i thought you said the above post my bad.
Click to expand...
 
0calli

0calli

Well-Known Member
well ive got carbon filter and all the seups ive seen outside the tent ive got no smell but i am air tight to never thought of doing it like that very good idea for sure
fir3dragon said:
no you dont, the carbon filter sucks the air in so it doesnt smell like pot in ur house.
Click to expand...
 
You must log in or register to reply here.
Top