Gtjoker420
Well-Known Member
So I have the 2 in 1 tent and trying to get the bottom section of the small side setup for vegging. The small side is a 3x1 space. Here's a picture of the space.
Which light do yall recommend
- Thread starter Gtjoker420
- Start date
Gtjoker420
Well-Known Member
I don't see one of their lights that would fit that small space
QB120 V2 Quantum Boards
High Efficiency LED Light Engines. 120pcs Samsung LM301H LED per board
horticulturelightinggroup.com
Or
F Series | SAMSUNG LED
High lumen density up to 18,600 lm, 175 lm/W @ 4000K, Size: 280 / 560 / 1120 mm
Both of these lights are highly customizable. Can share some builds if you are interested.
Nappertunity
Well-Known Member
What flowering glight will you be using?
J232
Well-Known Member
Not to high jack but I would be interested in seeing some f series builds when you have time, thank you.QB120 V2 Quantum Boards
High Efficiency LED Light Engines. 120pcs Samsung LM301H LED per board
Or
F Series | SAMSUNG LED
High lumen density up to 18,600 lm, 175 lm/W @ 4000K, Size: 280 / 560 / 1120 mmwww.samsung.com
Both of these lights are highly customizable. Can share some builds if you are interested.
Nappertunity
Well-Known Member
DIY LED Strip Build Designs for Samsung H-Series, F-Series, Q-Series, and Bridgelux EB Gen.2 - LED Gardener
DIY LED strip builds have become very popular recently. The mid-power section of our forum is full of threads created by DIYers looking to build their own custom lights, and new builds and ideas are surfacing every day. If you don’t live somewhere where you have easy access to premade lights...
ledgardener.com
View attachment IMG_20190817_001227.jpg
Qb120 x 4 + 3 x F series strips
View attachment IMG_20190927_212419.jpg
QB120 x 4 on a 240watt driver (can be scaled down)
View attachment IMG_20191012_110835.jpg
8 x QB120 on 2 x 240 drivers
3 x F series strips on a 240 watt drivers (pulls 260 from the wall because of the A series driver)
3 x F series (shorter length boards on a 150 watt driver)
J232
Well-Known Member
Yeah I checked that out a few times, I’m not looking to light an area, I want to build 2 8”x5’ strips to supplement my hid in flower with these 4K strips, I grabbed 26 from that blowout thread. 3-400 watts a side, 6-800 total. Really new to led, lots of reading to do. Think I found a parts list, that’s what I’m after, drivers and strips to achieve the watts. Sorry OP, carry on!DIY LED Strip Build Designs for Samsung H-Series, F-Series, Q-Series, and Bridgelux EB Gen.2 - LED Gardener
DIY LED strip builds have become very popular recently. The mid-power section of our forum is full of threads created by DIYers looking to build their own custom lights, and new builds and ideas are surfacing every day. If you don’t live somewhere where you have easy access to premade lights...ledgardener.com
Last edited:
GrOwThMoNgeR
Well-Known Member
Where you getting parts like the heatsinks/drivers/etc for these strip builds? Do you recommend strips over QB? I figured for more even par strips are better than QB in 2020?
Roshambizzle
Well-Known Member
Those DIY are basically as much as professionally built lights. Is there quality that much better to risk it without the warranty?? For like 200 more USD you can get a 5 by 5 light with an actual backed warranty for 3 to 5 years most times. Not to mention they aren't very nice on the eyes if that is something you care about.
Strips do have a better coverage, and would be first choice yeah
The bars are made from T slot aluminum, and is sold at many outlets. Generally you can find these at places that sell 3D printer solution.
That is generally true. For me, DIY costs just less than half of off of the shelf consumer options. Shipping and import makes commercial options a no go for me.
Only_a_middlewomen_now
New Member
I have same tent... I want get creative with venting and carbon filter. Maybe run filter on outside. and vent both tents thru carbon. Not sure if there will be too much moisture if I run seeding side into main tent, and then exhaust air.
Gtjoker420
Well-Known Member
So I am only really worried about exhausting my flower area through the carbon filter. The veg sid should be fine without it I'm thinking. I will put a couple clip on fans on the veg side though.