Will this work?

I'm questioning my design I've plenty of air being blown thru 2 stones as well as a good gap for the water to fall after the chiller once I take the top feed off but my pot which is 11l of clay pebbles sits on the bottom of the tote so am going to struggle getting much of an airgap the plant is sat at the top of the pot the crown level with the rim which sits 6 inch above the tote lid the water half way up the tote I would say 8 to 10 inch from the stem to the water level will this work anyone?

If there's ample oxygen in the water, it shouldn't be a problem. It's essentially dwc with a giant netpot unless I'm missing something.

Billy the Mountain said:

If there's ample oxygen in the water, it shouldn't be a problem. It's essentially dwc with a giant netpot unless I'm missing something.

Click to expand...

No you not missing owt pal Ive 2 stones in there blowing 60l per hour and I'm pumping water thru a cooler with a good gap between outlet pipe and surface of water so there should be plenty of oxygen in it I built these last year and got nicked whilst using them the old bill took my airpump I've only just bought another I tried an oxypot last Time thought I would give these another go thanks

Seems to be working