World Of Hempy

WattSaver · Dec 1, 2012

ineverveg said:
@WATTSAVER thanks for the tip on the crf ,busy reading all about it now, this could suit me down to the ground, how do you think it will do in the pot culture type reservoir i run?

Not really sure how well it would work, with your flooded tray. I did try it in 2L's once, I only used 1 tbsp/bottle and the plant exhausted it with several wks to go. It wasn't a smooth grow and I made several mistakes so I didn't give it a fair chance. I was planning on giving it a try again, but it will be 12/12 from clone this time.

ineverveg · Dec 1, 2012

WattSaver said:
Not really sure how well it would work, with your flooded tray. I did try it in 2L's once, I only used 1 tbsp/bottle and the plant exhausted it with several wks to go. It wasn't a smooth grow and I made several mistakes so I didn't give it a fair chance. I was planning on giving it a try again, but it will be 12/12 from clone this time.

yeah i have done a lot of scouring and only found a few vague references to its use in pot culture, although many good things are said about it in passive hydro.i will trial 1 in a 2 liter coz i love the sound of this stuff

WattSaver · Dec 1, 2012

ineverveg said:
yeah i have done a lot of scouring and only found a few vague references to its use in pot culture, although many good things are said about it in passive hydro.i will trial 1 in a 2 liter coz i love the sound of this stuff

Here ya go. http://www.420magazine.com/forums/g...plant-food-discuss-its-use-cannabis-here.html

ineverveg · Dec 1, 2012

WattSaver said:
Here ya go. http://www.420magazine.com/forums/g...plant-food-discuss-its-use-cannabis-here.html

i came across this a few hours ago when i read your post on page 10 of WOH, its a good read and i will take in the whole thread when i get time, the part on alkalinity is really interesting and i must read into that as well,cheers man

Moebius · Dec 1, 2012

Today, I made some more full-melt bubble hash from lower bud at its blowing my head off. Its probably the strongest smoke Ive ever come across. Its too oily to hold in my hands as my body heat starts turning it to oil.

About 10minutes ago I made a joint using a piece half the size of a pea, I smeared onto cigarette paper w/ mainly tabacco. Halfway through the joint and the buzz is all over my body. Its almost too strong and I can imagine a weaker smoker throwing up but I feel very good.

Very hashish smell with almost zero plant matter. I find the stronger and purer the hashish the more it loses some of the finer aromas that are contained with the green plant material. This stuff is FAR more potent than regular weed.

I'm super pleased I made it as my crop is drying atm. Happy Days :bigjoint:

Moebius · Dec 1, 2012

W.O.H TO DALEK ... ARE YOU OUT THERE DALEK?

Hope things are cool dude. Drop us a post sometime. :leaf:

Shivaskunk · Dec 1, 2012

Looks like a tasty pile of dog poop :-P

. I have family from Mendocino visiting and almost have them talked out of a pick up truck full of trim. Condition....I help dispose of the bud ...I get the trim.

Moebius · Dec 1, 2012

Shivaskunk said:
Looks like a tasty pile of dog poop . I have family from Mendocino visiting and almost have them talked out of a pick up truck full of trim. Condition....I help dispose of the bud ...I get the trim.

Yeah, its drying out a bit and now I can at least pic it up.

What do you mean 'dispose of the bud'. If its risky for you, I would forget it. No point jeopardizing your own stuff.

edit:
Never mind, I get ya ;-)

Moebius · Dec 1, 2012

I have to say, this growing hobby sure takes up a lot of ones time. LOL

I wanted to go to a bar tonight but took a pass because I have to trim plants for drying, then I need to clean the nozzles in my aero cloners AND feed my plants.

I'm not complaining .... much. Actually its a real buzz when things start coming together and you realize you can get a perpetual thing going.

but OH ! THE WORK, its like having a small child. lol

smoothness · Dec 1, 2012

Moebius said:
I have to say, this growing hobby sure takes up a lot of ones time. LOL

I wanted to go to a bar tonight but took a pass because I have to trim plants for drying, then I need to clean the nozzles in my aero cloners AND feed my plants.

I'm not complaining .... much. Actually its a real buzz when things start coming together and you realize you can get a perpetual thing going.

but OH ! THE WORK, its like having a small child. lol

i know what you mean mo. i was on a date with a girl and she wanted to "hang out with me" after the lunch. i said sure then took her home cause i wanted to check on the babies cause they was in the heat stress thing.l i finally got a window ac unit into the room. trying to find a inline fan to use on the lights. maybe ill just get one when i get my carbon scrubber. i got mist bottles finally and mist the shit out of the transplants hope the wilting one gets better. i need to get a cloner but i have to get more money so maybe another few days before i buy the ezclone. anyone have experience with the ezclone? im planning to get the 120 clone one but should i get the 30 or 60 one instead?

Moebius · Dec 1, 2012

smoothness said:
i know what you mean mo. i was on a date with a girl and she wanted to "hang out with me" after the lunch. i said sure then took her home cause i wanted to check on the babies cause they was in the heat stress thing.l i finally got a window ac unit into the room. trying to find a inline fan to use on the lights. maybe ill just get one when i get my carbon scrubber. i got mist bottles finally and mist the shit out of the transplants hope the wilting one gets better. i need to get a cloner but i have to get more money so maybe another few days before i buy the ezclone. anyone have experience with the ezclone? im planning to get the 120 clone one but should i get the 30 or 60 one instead?

I built mine DIY stylee.

smoothness · Dec 1, 2012

i rather pay a bit more then do it myself cause i suck at handy man work. haha

Moebius · Dec 1, 2012

smoothness said:
i rather pay a bit more then do it myself cause i suck at handy man work. haha

tbh I probably shouldve done the same, ended up costing me the same.

Anyways, Im sure your moms will perk up after that mist, if they haven't done so already :-P

Sounds like your getting there bro.

Shivaskunk · Dec 2, 2012

Well even with some problems this grow i have

a few pretty buds almost ready to come down. another and larger cola is deadhead (sfv kush x chemdawg) diff smelling pheno of jack

Jack frost by kush

Moebius · Dec 2, 2012

Shivaskunk said:
Well even with some problems this grow i have View attachment 2427574 View attachment 2427575a few pretty buds almost ready to come down. another and larger cola is deadhead (sfv kush x chemdawg) diff smelling pheno of jack

View attachment 2427576 View attachment 2427572 View attachment 2427573 Jack frost by kush

Looks sticky. :eyesmoke:

Im liking the purples. I've never grown anything like that, I got my fingers crossed for GDP. Ive got a Chemdawg freebie in soil pot, I'm glad I flowered early cause its a stretcher.

Are these plants from seed or clones?
What were the problems? Burns and lockouts?

jela10 · Dec 2, 2012

Shivaskunk said:
Well even with some problems this grow i have View attachment 2427574 View attachment 2427575a few pretty buds almost ready to come down. another and larger cola is deadhead (sfv kush x chemdawg) diff smelling pheno of jack

View attachment 2427576 View attachment 2427572 View attachment 2427573 Jack frost by kush

Awesome hues and trike concentration....reminds me of some Purple Kush I grew back in my soil days...I hear the end-of-year cooler temps aid the purple hues considerably. This reminds me too, I have some "Red Dragon" seeds from Barney's Farm that I seriously need to move up in priority.

jela10 · Dec 2, 2012

Moebius said:
Today, I made some more full-melt bubble hash from lower bud at its blowing my head off. Its probably the strongest smoke Ive ever come across. Its too oily to hold in my hands as my body heat starts turning it to oil.

About 10minutes ago I made a joint using a piece half the size of a pea, I smeared onto cigarette paper w/ mainly tabacco. Halfway through the joint and the buzz is all over my body. Its almost too strong and I can imagine a weaker smoker throwing up but I feel very good.

Very hashish smell with almost zero plant matter. I find the stronger and purer the hashish the more it loses some of the finer aromas that are contained with the green plant material. This stuff is FAR more potent than regular weed.

I'm super pleased I made it as my crop is drying atm. Happy Days

As "blonde" and free of plant material as that is, I can tell the work you put into it...that has to be a clean smoke. I just do the dry ice extraction for kief that comes out the same color as yours. Is that a "Silpat" silicone mat made for cooking pastries?

Moebius · Dec 2, 2012

jela10 said:
As "blonde" and free of plant material as that is, I can tell the work you put into it...that has to be a clean smoke. I just do the dry ice extraction for kief that comes out the same color as yours. Is that a "Silpat" silicone mat made for cooking pastries?

A silicaone mat is a good idea. No its just a mesh thing that came with the kit, they gave me 4 of them.

You know what, I made that hash in under 30minutes. And could smoke a joint in under an hour. It drys real quick. Ive got a hempy or 2 with weird pheno's, they had tons of crystals but no fat buds so I just but them in the freezer. I'm going to have plenty of hash for weeks.

I want to try the dry ice kief. At first it sounded too technical or dangerous or something but after reading and seeing it done it looks straight forward enough. Just have to find the right size can as the shaker.

I've already found a CO2 supplier than will deliver it. Do you use it in pellet form?

drdank50 · Dec 2, 2012

Moebius said:
Looks sticky.

Im liking the purples. I've never grown anything like that, I got my fingers crossed for GDP. Ive got a Chemdawg freebie in soil pot, I'm glad I flowered early cause its a stretcher.

Mo, you can always supercrop the chemdawg. That will force side branching, but with your height limitations, may be the best way to go for those sativa dom strains.

johnnymcpotts · Dec 2, 2012

Moebius said:
A silicaone mat is a good idea. No its just a mesh thing that came with the kit, they gave me 4 of them.

You know what, I made that hash in under 30minutes. And could smoke a joint in under an hour. It drys real quick. Ive got a hempy or 2 with weird pheno's, they had tons of crystals but no fat buds so I just but them in the freezer. I'm going to have plenty of hash for weeks.

I want to try the dry ice kief. At first it sounded too technical or dangerous or something but after reading and seeing it done it looks straight forward enough. Just have to find the right size can as the shaker.

I've already found a CO2 supplier than will deliver it. Do you use it in pellet form?

I have done one round of dry ice and loved it! I used the pellets but would guess small chunks would work fine. It's quick, easy and no mess. I used a 5 gallon bucket. I'll be running another round soon. I bet once you try it you will be hooked

World Of Hempy

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Similar threads