bicit
Well-Known Member
I've been combing through the application notes. I plan on using active cooling by placing an 80mm fan over top of each diode. I'm also planning on playing around with some water cooling configurations. I haven't sat down and done the math yet, but I should be able to get something sorted out. Right now I'm planning on using a Meanwell HLG-185H-42 and wiring them in series. Still doing some research to make sure that the PSU will work and I need to call bridgelux to ensure that this can be done without damaging the Diodes. Hypothetically speaking though, it should go together fairly easily. If I use the molex connection I may not even have to fireup a solder gun.
My main question though is will it work well enough in a 2'x3'x5' space? Think I could match or come close to the performance an Area 51 XGS-190? Alternately I've been looking at running 6 vero 18's which gives me better lighting distribution, but also adds considerably to the cost of final assembly, ($40*6) vs ($60*2) without going into the cost of heat sinks. Though only being driven at 1040 ma makes thermal management easier.
Thoughts?
Link to power supply in question.
http://www.meanwell.com/search/hlg-185h/default.htm
My main question though is will it work well enough in a 2'x3'x5' space? Think I could match or come close to the performance an Area 51 XGS-190? Alternately I've been looking at running 6 vero 18's which gives me better lighting distribution, but also adds considerably to the cost of final assembly, ($40*6) vs ($60*2) without going into the cost of heat sinks. Though only being driven at 1040 ma makes thermal management easier.
Thoughts?
Link to power supply in question.
http://www.meanwell.com/search/hlg-185h/default.htm