ProzacPhil
Member
lets see some pictures.
Ill Homemade Bongs
- Thread starter IRONMAN4200
- Start date
I found a broken glass candle holder that was able to hold 8 tea cup candles. One of the candle holders were broken so it was a perfect circle. I got the lid to our salt shaker and it fit perfectly into the hole! It's the perfect homemade steam roller and hits like a champ.
Working on making a homemade bong with a graduated cylinder now!
Working on making a homemade bong with a graduated cylinder now!
Ronald Wall
New Member
Ok I make a bong for under 3 bucks from wal-mart. Get a sippy mug ,one with straw that comes from bottom and makes handle, and a glass eye dropper or antifreeze tester. Cut or melt hole in lid to hit from. Heat eye dropper and force into straw, you may have to reheat couple of times. The eyedropper serves as a bowl.
e_louise
New Member
I made a pumpkin bong for Halloween last year. Carved out the inside, used a ratchet piece and a pen for the bowl and downstem, cut a waterbottle in half and carved the hole at the top to fit the bottle (used a hot glue gun to seal the water bottle into the pumpkin). Worked like a charm!
Commander Strax
Well-Known Member
My bong has a carb
ChingOwn
Well-Known Member
explain
Commander Strax
Well-Known Member
Maybe I am an idiot, but the "carb" is a little hole in the water pipe that you put your finger over and breath in.Wwhen you feel that it is time, towards the end of the burning of the contents of the bow, you remove your finger and breathe the remaining smoke from the bong.
This can also be achieved by pulling out the slide.
This is the bong I own and the black dot that can be seen in the picture is a rubber plug that can be removed to allow use of the hole.
ChingOwn
Well-Known Member
I have never seen the like... weird they would have two options for a kick hole, guess they are trying to make smoking like sex lol....I especially like that last bit.... a rubber plug that can be removed to allow use of the hole. had me thinking about hentai movies i fap toMaybe I am an idiot, but the "carb" is a little hole in the water pipe that you put your finger over and breath in.Wwhen you feel that it is time, towards the end of the burning of the contents of the bow, you remove your finger and breathe the remaining smoke from the bong.
This can also be achieved by pulling out the slide.
This is the bong I own and the black dot that can be seen in the picture is a rubber plug that can be removed to allow use of the hole.
ProfessorEnglbert
Active Member
Cheap plastic bongs tend to have carbs instead of removable slides too
Commander Strax
Well-Known Member
back in the 80's I think all the plastic bongs had a carb hole
ChingOwn
Well-Known Member
Im a holy roller but If I think about a bong Ill go throw back
justugh
Well-Known Member
this is from my teen years ................i share the story of Cletus Ungine Lippy Jr. (may he have many many many kids)
yes he is a redneck ..........a true redneck with lots of broken cars trucks tractors lawn mowers and 100s of wild outdoor cats down a road that is gravel off a road what has no name in the middle of farm feilds
the story is simple we scored a sack of weed but we had nothing to smoke from .......cletus goes i have a idea and he is off into some of the buildings we are standing in his driveway just kicking ourselves for leaving the bowl at my house
he comes walking down the drive way with a bag smiling like a mother fucker ......in it is 6 empty soda cans a old curtin rod a 4mm socket and duct tape
he whips out his knife and cuts holes in the bottom of the 5 them and hands to me and tells me to stack them then duct tape to hold and seal
he has the 6th can and the curtin rod figuing out how much to break off and then open the hole back up in the rod at the bottom with the stick i give him back the duct tape he wraps it up and puts in the socket tapes it down then makes a hole in the can put it in like a hitter and hands it to me to tape to bottom of the stack ...........hand him it back and he makes a shotgun hole to let the smoke hit with out pulling hitter
the man is a bong demi god 10 mins from no bong to one that kicked our asses ..............and to boot he built a pinto out of 3 broken pintos in his yard wired up a 1000w amp and 2 15 inch speakers (whole back seat was speaker box) then wires it to a mic system so he can yell at ppl driving his car or listen to music
yes he is a redneck ..........a true redneck with lots of broken cars trucks tractors lawn mowers and 100s of wild outdoor cats down a road that is gravel off a road what has no name in the middle of farm feilds
the story is simple we scored a sack of weed but we had nothing to smoke from .......cletus goes i have a idea and he is off into some of the buildings we are standing in his driveway just kicking ourselves for leaving the bowl at my house
he comes walking down the drive way with a bag smiling like a mother fucker ......in it is 6 empty soda cans a old curtin rod a 4mm socket and duct tape
he whips out his knife and cuts holes in the bottom of the 5 them and hands to me and tells me to stack them then duct tape to hold and seal
he has the 6th can and the curtin rod figuing out how much to break off and then open the hole back up in the rod at the bottom with the stick i give him back the duct tape he wraps it up and puts in the socket tapes it down then makes a hole in the can put it in like a hitter and hands it to me to tape to bottom of the stack ...........hand him it back and he makes a shotgun hole to let the smoke hit with out pulling hitter
the man is a bong demi god 10 mins from no bong to one that kicked our asses ..............and to boot he built a pinto out of 3 broken pintos in his yard wired up a 1000w amp and 2 15 inch speakers (whole back seat was speaker box) then wires it to a mic system so he can yell at ppl driving his car or listen to music
Mr. Bongwater
Well-Known Member
my friend made a bubbler out of a 750 ml pop bottle, a metal bowl from one of those little metal pipes, and tubing. Works better then a normal bubbler, smoove as fuck he used hot glue gun to seal it
XXVII St.
Well-Known Member
HA. That's called the vacation hotel bong. You fly somewhere and finally hook weed. But you have no device and the smoke shops closed/too far.i've made a really ghetto bong...
in desperate times...i've taken a 500mL water bottle, cut a small hole into it....stick a straw through the hole (thicker plastic straws work better---and if somehow you can get a metal straw, even better!). Then i take a pappermate mechanical pencil. The fancy ones...i think they are called PhD's. Unscrew the metal tip, and attach it to the end of the straw. Might require some tape and craftiness. Because the pencil tip is made of thick metal you can get a few good bowl rips before the straw/tape starts to melt. lol.
then
Fill up the bottle with water...and hit the bottle from where you'd normally drink it from.
Alternative construction....you could do the same thing using aluminum foil.
wrap the foil around a pen to form a thick cylinder, place the pen tip snugly into the foil and rip your lungs away...
even more desperate...you could craft the bowl piece and straw out of foil.
the end.
I know them well.
but i use gum as the sealant.
XXVII St.
Well-Known Member
That's SICK! the tubes wrapped around the one stem reminds me of the medical symbol with the snakes. Love it.Maybe I am an idiot, but the "carb" is a little hole in the water pipe that you put your finger over and breath in.Wwhen you feel that it is time, towards the end of the burning of the contents of the bow, you remove your finger and breathe the remaining smoke from the bong.
This can also be achieved by pulling out the slide.
This is the bong I own and the black dot that can be seen in the picture is a rubber plug that can be removed to allow use of the hole.
Mr. Bongwater
Well-Known Member
i guarantee you nobody can make something homemade better then the bubbler my friend made, no offensive its just down right amazing
Mr. Bongwater
Well-Known Member
my friend made a bubbler using tubing, a metal bowl with a big screen from a motel pipe, a 750 ml pop bottle and hot glue gun. works 100% as good as a glass bubbler. i just made a bong, if u make it right it with hot glue works just as good as a real bong