Congrats on testing the 235 watt Rocket Plasma. To confirm you were able to produce 211.2 g from a 235 Rocket Plasma or around .9g/w? Did you ever test the Rocket Plasma in a 4 by 4 area with taller clones? This is quite good. I have the radiant flux (W/nm) of the 3,000 Kelvin bulb from Rocket Plasma.without having seen a lot of plasma components, that looks exactly like whats in my light, much more than the pics luxim has on their site... and that page reports 235w usage, which is what rocket plasma claims... nice observation.
anywho, just checkin back in and though id share some more data, from that past test grow i ended up with 211.2g (7.54oz) from plasma side and 331.6g(11.84oz) from the hps side... plus about 75g of some fluffy nonsense that went right into the extraction tubes, shouldve been a little more pro active with the pruning scissors after the stretch, but not too bad of a yield for 830watts of light
Before jumping into this , I would like for you to understand that they are NOT using a luxim module on the rocket plasma. It is only a 5000hr life on their light engine, meaning it needs to be changed at every new run for optimum performance IMO. Think it cost around $90 for the replacement(?), and skews all their ROI data that doesn't include this on their website.Congrats on testing the 235 watt Rocket Plasma. To confirm you were able to produce 211.2 g from a 235 Rocket Plasma or around .9g/w? Did you ever test the Rocket Plasma in a 4 by 4 area with taller clones? This is quite good. I have the radiant flux (W/nm) of the 3,000 Kelvin bulb from Rocket Plasma.
I'm new on here and is there a way to talk privately?
Hi PSUAGRO,Before jumping into this , I would like for you to understand that they are NOT using a luxim module on the rocket plasma. It is only a 5000hr life on their light engine, meaning it needs to be changed at every new run for optimum performance IMO. Think it cost around $90 for the replacement(?), and skews all their ROI data that doesn't include this on their website.
good luck
Hi PSUAGRO,
Thanks for replying. Yes, they are using Topanga technology, which broke off from Luxim. When you say "light engine" I assume you mean the bulb and it's shaft that inserts into the emitter. The emitter and power supply last much longer. However, the spectrum of their 3,000 Kelvin looks great compared to Luxim's higher Kelvin bulbs. Also Luxim can't change bulbs.
After reviewing the radiant flux of the 3,000 Kelvin bulb, I am amazed that gcrumpets obtained around 90% of an HPS yield per watt.
I know what Luxim's yields are. I've also grown using the LG 700 watt plasma in the 2000's and I can attest to the health of the plants. A lot depends on the chemicals used. I got 32.1% more yield per HPS watt using a 4,500 K LG bulb at 700 watts.
Luxim's yield compared to HPS differs so much from Rocket Plasma's 3,000 Kelvin bulb, according to gcrumpets that I'm wonderg if it's not only the lower Kelvin bulb, but Topanga has an overall higher efficiency then Luxim concerning their power supply, frequency used, and optical efficiency.
Has anyone else done tests on Rocket Plasma or Luxim plasmas to your knowledge?
Read this study:
SPECTRAL PROPERTIES OF MICROWAVE-POWERED SULFUR LAMPS IN COMPARISON TO SUNLIGHT AND HIGH PRESSURE SODIUM/METAL HALIDE LAMPS
Thanks for any assistance.
----Thanks for the clarification! never used plasma personally, so my info is basic. Didn't know that topanga tech needs only the bulb replaced rather than the entire module. Do you have any idea what the replacement bulb cost is on the rocket fixture?
Yes luxim will never replace HPS as it stands now, hence gavita's recommendation for hid supplementation during flower.
Your study is about sulfur not MH plasma which I agree is looking very promising. But the prices are out of most growers budgets except for Coca
Really need pics for this journal. Not saying i dont trust the thread starter, but pics would make those numbers alot more real.
My plasma light was DIY, luxim is the supplier of plasma products, so really dont see a comparison between any of these companies, other then name and how the unit is assembled.
Btw, cost about 700 or less to assemble a plasma light.
Hope this thread gets updated with pics !
Plasma love yall!
Yoda veggin under plasma
Well most i know that run hortilux change out every cycle to maintain constant yield. SO tell me whats the difference.. And second the 2 year warranty.. well its a USA company they will take care of you I know that for a fact. And the turn around time is fast. At least if something fucks up i send it straight to them on a personal level not to a flipping supplier who your a number too.. SO I'm taking my chances on a good ol US companySo basically red rocket is using this plasma lamp that has a 3000-5000hr life!!!! what's the point of this tech then?? it's WORSE than most HID bulbs even fucking worse than a metal halide. Have to replace after each run.......that's crazy.
At least luxim plasma modules have a 30,000hr life..........
CMH blows this fixture out of the water with longevity/lumen deprectiation/cost/spectrum/etc. ........this plasma is a step-backwards IMO.