Hash and Oil Picture Thread

[budbro18]

I have a straight concentrate burner as well and it has its purpose. I love the tank system on the evo though, because I can take it anywhere and no one says shit to me. I hit it in the grocery store, in the car, at the mall. The day after we got our pens, my wife and I got pulled into a DUI check point. She had the pen on her lap and the cop on her side asked about it. She told him it was her Ecig, and showed it to him. The cop on my side stood there and told me about his pen. We went on our way. The next day we went to an indoor concert, and it was awesome being able to vape all night inside without anyone caring or knowing it was THC .

Too true. I see people walkin around cedar point all the time with pens and i never know which are ecigs and which have hash.

 

[Sirdabsalot462]

Yes indeed, I've got a few different pens for the straight coils for ” dab vapors” glass globe and straight sleeve.

Favorite one of those is my Seego Vhit BOLD, has a huge atomizer Ti bowl that has a screw on cap.

But I really wanna use this new one with the juice.

Not really sure what type of ” izer” this is... Clear-o-mizer?

From the top.. The middle hole is the coil...the small hole on the left is where you” inject” your juice mix, the pens website says to fill using the side hole to avoid damaging the burner.

This only has 2 wicks though, I've heard the more the better?

My two favorite pens currently

 

[Thundercat]

I suggest getting a kanger tank with the bottom wicks. Instead of the wick pulling the fluid up, the fluid always sits on the wick. I think the standard evo tanks have the bottom wick but I;m not sure.

 

[Sirdabsalot462]

Easy lads UK boy here....loving your oil shots shit looks dank as fuck giving me a twitch on....anyway I'm just shopping around for bits n bobs on the bay to get my self set up for making me some honeycomb...the only things I'm unsure about are the pump and extraction tube....the pump I'm looking at is a 2 stage 3.9cfm but they all say A/C pumps are these the correct ones? Also I'm not gonna be running huge amounts I was thinking an 8" tube will be just right for packing a nice 30g or so nice n tight does this sound about right?

Easy lads UK boy here....loving your oil shots shit looks dank as fuck giving me a twitch on....anyway I'm just shopping around for bits n bobs on the bay to get my self set up for making me some honeycomb...the only things I'm unsure about are the pump and extraction tube....the pump I'm looking at is a 2 stage 3.9cfm but they all say A/C pumps are these the correct ones? Also I'm not gonna be running huge amounts I was thinking an 8" tube will be just right for packing a nice 30g or so nice n tight does this sound about right?

First and foremost, Awesome avatar.

As long as the pump looks something like this

You are golden.

Regarding your tube, I recommend annealed Boro, the length of the tube should be a but longer than 8” for an oz tube, depending on ID(inner diameter)

Ideal ID is 1.25”-1.5”.

But I've been having some great results with my 2 oz glass tube with an ID of 1.75”...

Welcome to the realm of BHO, a fair warning...if you have dank flowers/trim and make some killer oil...

All of your flowers will eventually be dedicated to extract the nectar.

It happened to me..lol

Only keep Top buds...and even those get stuffed into the tube eventually.

 

[shawnybizzle]

Thanks for the reply sirdabs aye its a lovely avi ain't it lol..

Yes thats what the pump looks like heres a link
http://m.ebay.co.uk/itm/251454912127?nav=SEARCH


I might go for a longer tube then the inside diameter of the one I'm looking at is 1.5 inch I just might get a 12 inch bigboy then lol

Made a bit of qwiso in the past but not too keen on the alcohol taste it leaves behind....I'm gonna keep a few oz of nice nugs to make a batch with as well as all my trim should be nice coming from uk exo cheese...I can't wait to have a dabble with all the right equipment and make my self a proper extract I'm after the honeycomb that's what I'm looking for

 

[Concentrator]

WhiteFireOG

 

[Guzias1]

Polyethylene, I don't like the taste it leaves..

propylene glycol, best easiest mixer..

good luck sir d.

for your first batch. Try a 1:3(oil/pg) ratio. It will be abit thin, and less potent , but it will urn correctly. (noburnt wick taste)

 

[Guzias1]

p.s .do the mixing in a separate container, dont try and mix in cartridge

 

[Sirdabsalot462]

Thanks for the reply sirdabs aye its a lovely avi ain't it lol..

Yes thats what the pump looks like heres a link
http://m.ebay.co.uk/itm/251454912127?nav=SEARCH


I might go for a longer tube then the inside diameter of the one I'm looking at is 1.5 inch I just might get a 12 inch bigboy then lol

Made a bit of qwiso in the past but not too keen on the alcohol taste it leaves behind....I'm gonna keep a few oz of nice nugs to make a batch with as well as all my trim should be nice coming from uk exo cheese...I can't wait to have a dabble with all the right equipment and make my self a proper extract I'm after the honeycomb that's what I'm looking for

Please please post some shots of the UK Exodus Cheese, I've seen some jaw-dropping macro shots of her trichomes and some killer bud shots from a felluh on ICMAG.

@Guzias
I was hoping you'd chime in on the pens...
Should I stick with this Clear-o-mizer?

Or find one like Thundercat speaks of?

It also looks like there is some weird plastic covering the wicks, is this normal?

 

[shawnybizzle]

I'm only 22 days in so a bit to go yet but I'll throw you some pics up in a few weeks when their looking more sweet....I'll whack a couple if early shots up for you tho giz a min

 

[shawnybizzle]

There ya go only 3 weeks in so not much to look at but 4 weeks and I'm sure they'll be dripping with trichs

 

[francy420]

Dabs I gotta say the bubble is looking on point lately my friend. And you are so true about all your flowers going to oil. I don't even see nugs when I go in my flower room anymore. Just goooooooddddddd oil.

And yes a bottom wick works much better. Not even sure what kind I have. A bitch to load but vapes great. my favorite is still the globe though on my I-taste MVP. I do have smalle batteries but the I-taste lasts for days, fuck even weeks.

 

[Sirdabsalot462]

Polyethylene, I don't like the taste it leaves..

propylene glycol, best easiest mixer..

good luck sir d.

for your first batch. Try a 1:3(oil/pg) ratio. It will be abit thin, and less potent , but it will urn correctly. (noburnt wick taste)

Thank ya Guzzzzz!!

My main purpose of this particular pen is it's stealth, for my next hip surgery, the last time I used some pre-filled carts that looked exactly like regular disposable e cig carts,and it was Nass-t. Tasted horrible and barely drew any vapor, but I guess it served its purpose .

So, I'm gonna find me a clearomizer with the bottom wicks, propylene glycol and an injector and this pen should work great in the hospital .

There ya go only 3 weeks in so not much to look at but 4 weeks and I'm sure they'll be dripping with trichs

Looking great my friend, don't know if you've grown her yet, but that strain produces amazing flower structure , a joy to trim, and it's original genetics will produce copious amounts of resin. Any strain with Cheese.

Just like everything else, better with some cheese on it. !
Thanks for sharing, please feel free to post some more in a few weeks.
(You got a grow log?)(I would follow)

Dabs I gotta say the bubble is looking on point lately my friend. And you are so true about all your flowers going to oil. I don't even see nugs when I go in my flower room anymore. Just goooooooddddddd oil.

And yes a bottom wick works much better. Not even sure what kind I have. A bitch to load but vapes great. my favorite is still the globe though on my I-taste MVP. I do have smalle batteries but the I-taste lasts for days, fuck even weeks.

Thank you so much Francy,
I just want to learn the nuances of all extraction methods, I'm really loving the bubble hash that actually bubbles like crazy... Holy shit it tastes sooooo heavenly off the Ti, and/or by itself or powdered hash mixed with some flower, and a freshly pressed disc atop a bowl.

I'm finding the bubble hash high to last a bit longer, but that could be just because I'm puffing on pipe all day too....lol

2 bowls prepared as described above lasts all day and night.

 

[qwizoking]

The qwiso taste it leaves behind? ..Ran some last night, those of us in tx know about our current moisture issues. Only ran in 100% humidity a few times, thought it would be fun.. Here's a pic, its from some really old trim, some kinda old trim and some fresh..master kush x

And quit your yapping..boring me over here

 

[Sirdabsalot462]

Go fornicate yourself, wiki-scientist.

 

[qwizoking]

Lol wikiscientist

 

[Thundercat]

I think you'll like the bottom wicks for sure SirD. Anther thing I'll share that I've been learning about the vape liquids since my wife vapes nicotine. With our extracts it seems the PG works best for disolving them. The PG from what I've been reading and being told at the vape shop along with my own observations, provides more of the feeling like your getting a hit in your throat. Alot of people with just the nicotine use VG, vegetable glycerin, which gives you more flavor, and more actual vapor. However our oils don't disolve well in the VG. I'm guessing that the prefills you bought were pure PG which is why they didn't have tons of vapor.

I've tried disolving in 50%PG/50%VG, 80/20, and 100% PG. The 100% slightly warmed definitely disolved the best. The 50/50 defnitely had more flavor and vapor. The 80/20 worked decent in general. I'm due to make another batch this week I hope. This time I'm going to be disolving in 100% PG and then mixing it 50/50 with some VG and see how it goes.

 

[Sirdabsalot462]

I think you'll like the bottom wicks for sure SirD. Anther thing I'll share that I've been learning about the vape liquids since my wife vapes nicotine. With our extracts it seems the PG works best for disolving them. The PG from what I've been reading and being told at the vape shop along with my own observations, provides more of the feeling like your getting a hit in your throat. Alot of people with just the nicotine use VG, vegetable glycerin, which gives you more flavor, and more actual vapor. However our oils don't disolve well in the VG. I'm guessing that the prefills you bought were pure PG which is why they didn't have tons of vapor.

I've tried disolving in 50%PG/50%VG, 80/20, and 100% PG. The 100% slightly warmed definitely disolved the best. The 50/50 defnitely had more flavor and vapor. The 80/20 worked decent in general. I'm due to make another batch this week I hope. This time I'm going to be disolving in 100% PG and then mixing it 50/50 with some VG and see how it goes.

Thanks for the advice TC..
I bet you are right on the money about the pre-filled ecig carts, (thankfully , I didn't have to buy them, got plenty of friends working in dispensaries)

Definitely gonna go with the PG...
One more question if you don't mind...
*would like Guzias' opinion also*

My oil tastes great, have y'all used any of the flavored ejuices?

Pretty sure I just want "plain" but if the flavored makes a an enjoyable taste,I'll give her a whirl, I reckon I'll just try both.

 

[qwizoking]

I got one called snake bite.. its tasty
I do flavors for public

 

[Thundercat]

This winter I added a little of some peppermint patty e juice I had got for my wife. It was pleasant, just added kinda minty aftertaste to the regular oil taste. I tried a little bit of some strawberry stuff a couple weeks ago. My THC tank was almost empty, but i squirted some strawberry juice in there, warmed it a little in hot water and shook it around. It was good.