Damm lights came today and I missed them, they weren't supposed to be here till tomorrow anywise. Well can't wait till tomorrow, hopefully they'll arrive before my afternoon entrepreneur class.
DankSwag
Well my lights are here and wow, bright as the sun. Took me a few moments baked to get how the hanging kit assembles. Very well crafted can't wait to put them to use.
Speaking of my room, it is coming along slowly as I am a one man band on this gig. Like it that way as in I will ensure it is up to my code and won't have to waste time convincing someone to do it the way I want it. Not to mention having to go back and redo poor craftsman ship.
So the room was a pile had to boot someone to get it but damm it is coming along.
I have cleaned and prepped the walls for fresh satin white paint. I sprayed mold remover and applied a product with crab chittin in it that is supposed to prevent mold on these walls as well and will get started painting after I post for the products have dried.
Now keep in mind as you look at pics, this is an 10.x10.5 with attached 2x4. From left to right (10.5L) at far right corner is entry door 3 feet wide 2.5 deep opening into space consuming 8sqft (urgh) well have to seal bedroom door from hall as this is where air exchange could happen lowering CO2 ppm. I have opted to employ the entire space as "SEALED" meaning not just the flower area of 5(l) x 10(w) that begins from far left and works toward middle of room where a panda sheet divider with frame will segment it off from the next 5.5 of length with 10 feet deep space. Looking from the door entry at right corner across the room in the middle of the wall that runs a 10.5 length is a window which will be sealed as well. At the right end of the wall is where the attached space of a former closet of 2x4 will be utilized in the veg\clone portion of this room.
Which works well for it allows me to place AC portable of which I will vent heated moisture through sealed duct work into some kind of catch to recycle the 02 and if need be vent heat elsewhere for use. In any fashion room should stay sealed for keeping air exchange out and CO2 levels high. The flower room will house the CO2 and will be delivered top down over canopy during light cycles. Two circulating fans will keep air flow moving, air filter and fan in flower room will exhaust out over the top of veg room where ac will be across from it to cool and dehumidify room. There were be air vents at the bottom of the panda sheet divider across it to allow cool air to come. Thus I may not need a dehumidifier but ordered one in case. The entire room with closet is 113 square feet so I am thinking the AC I have with its BTU rating should do the trick. Hopefully the entire grow area being in one room divided by a light barrier that allows exchange of air between spaces in the sealed room will provided consistent stable environment of which even the veg room will benefit from CO2 being used in divided space in same sealed room. Will that increase veg growth it may and I may have to recalculate cloning and mainline training to accommodate. I am hoping they will eat it all up first in the flower as it is dispersed before it enters veg space.
Warning pictures of crude room being formed together early stages. However confirmation of Onyx Bloom lights. 4 Going into a 5x10 space. I have them spaced at 19 and 3/16th spacing between units and edge of canopy lengthwise and centered at 30 inches of the 5 foot width. My plant footprint appears to be looking like 4 across 3 deep each light staggered off center of light, thinking of 5 across to get 15 but 12 in this space should do just fine I am thinking.
Yes a package of 4 --- FREAKING SWEET!
[/ATTACH]
Look familiar, Anyone? Oh boy I get to mount power supplies... (that's what she said) outside the flower room. Looks like I will use pvc as pipe conduit.
This is far left wall from which flower room will extend across 5 feet from.
Yes the sky blue with a hint of clouds will remain as I will paint this wall to start, tear out carpet bellow extending out to 5 and half feet to start working on ensuring sub floor will hold up to passive hydroponic reservoir system and will need to seal floor with anti mold bacteria fungal product before applying a 6 mil ply plastic. Notice on masking tape where I have marked off each unit and it spacing, you can tell there will be a hella lota light shining down on my babies. Can't wait to get flower room painted, sealed, with panda film framed for divider, reservoir system in with other environmental equipment then lights and then my babies.
DankSwag