if you have enough put some oil in a test tube or a shot glass and add water, the water will turn white from the peg and the thc will sink to the bottom,, its a great way to check strength peg mixes with water,,,,,,thc does not, then you can dab the white water off with a paper towel, and see whats left.
it is the future, no mess no attention, great for hiking, i have converted most of my friends to oil in an e cig, how did you heat it and what were you dissolving it with?,, you can decarboxilate it and make chocolate(not after you mix it wit anything like peg)
plus you could turn that 60 dollar gram of shatter into 250 bucks worth of oil in 10 minutes, guaging by cost of commercial oil like open vape
nice stuff but you should try peg 400, i am working on a co2 extractor just slow going due to high cost of thick stainless steel weldless pipe,,,,so bho will do untill its done,,,i shake everything with dry ice through 200 micron bag then wash the hash i get with butane it is like winterizing first and 2 cans of tane does the work of 6 if your washing buds
if you make it rite you can use it in any e cig tank no special equipment needed,,go on e bay and search " the rite stuff " try it out it is peg 400 usp ,,, if you like it you can get more wherever ////vg sucks(can barley absorb thc), pg gives you a mix that will clog your wick if you dissolved enough to even be worth vaping, peg not ppg or vg,,works great every time
i must ask what you mean by reclaim
After vaping for a while, you will learn what desired reclaim is when it comes to e-ciggs.
i understand just never heard the term,, and yes water mixed will turn white stir it gently and soak up the white water with a paper towel or a syringe you will see the thc drop out to the bottom,, then let it dry,,,,you can heat it to dry it but its best to just let it sit a day
How do you mix them real good?
for a real good mix try " the rite stuff " on ebay , it is peg 400 usp it mixes one 5Ml bottle to one gram concentrate,,melt the concentrate in a shot glass on a coffee warmer or if you have an induction cook top put a pan on it put the shot glass in the pan and set the temp for 140f to 150f put the rite stuff in another shotglass and let it get warm, add the rite stuff a little at a time over about 10 minutes and keep stirring it with a dab tool, it will glob up on the dab tool for a couple minutes ,,when you get it dissolved most of the way , take a childs medicine syringe ( or a flavor injector from bband beyond) and suck up the oil and then flush it into the glass a couple times this mixes it real nice,, put it back in the rite stuff bottle , and put it in any e cig tank,,,after u get used to the mixture you can get the peg400 in larger bottles if you need them,, i will be putting a video on youtube real soon,,i am heading into the mountains tomorrow and wont have phone or internet for a couple days,,,, goin off the grid
you can but it works much better mixed for a 1 gram co2 oil stik ,,mix 50/50 it will still give you a dab like hit. with just co2 oil i have found that it works well but the voltage and current settings are very high to soften it up and let it flow often causing elements to burn out fast leaving you stranded,, changing coil is very messy and you will lose about 1/2 gram of oil,,,hope this helps, if you have lots of oil by all means just fill her up and vape happy, use a bottom fed tank
