stardustsailor
Well-Known Member
The heatsink first ,has to 'modified' so it can be attached to the inner base -plate .
This is done with 2x aluminium angles ,of 20 cm length -same as heatsink's length.
( Angle : 20 x 30 x 2 mm ) .
The heatsink's sides and the angle 30 mm side,are going to be finely sanded ,
epoxied together with Arctic Silver Epoxy and finally three rivets per angle ,
are going to keep the angles and heatsink pretty ..tightly together ..
This way the angles share some of the ..heat ,also ...