Finally Made It Back. . . New Grow Journal 3k Watt Tent

Blaze23

Well-Known Member
Finally decided to start documenting my grow again. Its been a long time since i've been an active user here but I plan to change that. Here is what I have going on right now.

Veg Room: 5 x 10 ft tent with 2 8bulb t5's.
Also have a smaller tent for Cloner and Clones.

Flowering Room: 10 x 10 tent with 3 - 1000 watt lights (Lumatek ballast, Hortilux bulb, Raptor hoods)

18 plants currently flowering: LSD, Critical + (Dinafem), Cheese (Dinafem), Green Crack (HSO), Tangilope (DNA), THC Bomb (Bomb Seeds).

I figured I'd start the thread now and start posting pics tomorrow.
 

Blaze23

Well-Known Member
I'll be staking these up this weekend as well and doing a little thinning out. I'll also be posting pictures that are more detailed. Thanks for looking.
 

Blaze23

Well-Known Member
Lol. I know, I know. I have to buy an extension cord to move it away from the A/C. Im still working on the room, I should have everything in place this weekend.
 

Dr.Pecker

Well-Known Member
I like buckets but I always end up drilling holes in them. I have the hook on cherry buckets fda plastic.
 

silusbotwin

Well-Known Member
You should check your co2 levels outside of the tent. Real world co2 should be around 370 ppm.
Just curious so please don't think I'm looking for an argument or anything like that when I ask: What makes you wonder about his Co2 levels? I did see that he is supplying Co2 with a 20# aluminum tank but I didn't see anything anywhere in the thread or in the photos having to do with Co2 levels.

With that said, let's not forget that Co2 levels vary greatly depending on multiple factors. Such as, areas near freeways or any other heavy automobile traffic tend to have a much higher Co2 concentration than rural areas or areas that have no automobile traffic. Then theres the factor of where exactly this tent is located. Is it in a basement or some other room that also contains gas-powered appliances? My rooms are in my basement along with my old hot water heater and the furnace that heats my home. I've noticed that Co2 levels are much higher down there then they are on other floors of my house. The top floor of my building stays steady around 300-350 ppm Co2 but my basement reaches double that amount easily (between 600-750 ppm), in the winter when I'm burning alot of natural gas down there.

If you're curious about the levels of Co2 in your area and you would like to take measurements but you are unable to afford one of the many different over-priced meters on the market (even the crappiest ones that only measure in increments of 200-300 ppm are still quite expensive at a few hundred bucks), look into the Autopilot Air Quality Monitor like this one from Amazon:

http://www.amazon.com/AutoPilot-APCEM-Autopilot-Desktop-Monitor/dp/B008NPA18A

I can't say for certain just how accurate they are but they use a digital readout that utilizes 4 numbers unlike the crappy ones that just have a little row of led lights that light up upon co2 levels reaching whatever range the led corresponds to. It's hard to explain but for instance there may be 5 led's and when the first LED lights up it indicates 0-300 PPM, and when the second LED lights up it indicates levels somewhere between the 301-600 range, and then the third LED indicates levels in the 601-900 range, and so on and so on..... These meters leave us completely clueless as to the actual amount of Co2 in the air. The first LED being lit could mean Co2 levels are 100PPM, 150PPM, 155PPM, 200PPM, etc. etc. At least with the Autopilot the accuracy is much greater than a 300 PPM variance. I would love to pick up a Co2 controller that uses a digital readout but the damn things are just SO freakin expensive. Anyone have a source for an reliable AND affordable controller that utilizes a digital readout instead of those crappy LED's like the one in the picture below?



Anyhow, I'm really sorry for jacking your thread OP. Please forgive me as I'm pretty baked right now and I have a tendency to go off on many ADD-fueled tangential ramblings lol

I'm really digging your garden. It's very obvious that you take care of those ladies very diligently. Nicely pruned bottoms, room looks to be designed very well and efficient, and most importantly those ladies look like they're pretty frickin happy. I bet that tent was a pain in the ass to get the shell-skin over the frame. I never realized just how heavy those things are until I had to build a 5'x10'x7' tent all by myself.

Is that a single exhaust hose portable A/C or is that a dual-hose? I have two of those suckers and they have done the job (not very efficiently though) for a couple Summers now. I was finally able to get a great deal on a mini split a few weeks ago so I'm prepared for next Summer ;) <------caught myself going off on another ADD tangent-fest lol

Subscribed to the thread and looking forward to seeing your progress and the results of your hard work.
 

Blaze23

Well-Known Member
You should check your co2 levels outside of the tent. Real world co2 should be around 370 ppm.
My levels are actually a little higher around 500 - 600 ppm. My tents in the basement not too far from the furnace so maybe that has something to do with it like silus said.
 

Blaze23

Well-Known Member
Anyhow, I'm really sorry for jacking your thread OP. Please forgive me as I'm pretty baked right now and I have a tendency to go off on many ADD-fueled tangential ramblings lol

I'm really digging your garden. It's very obvious that you take care of those ladies very diligently. Nicely pruned bottoms, room looks to be designed very well and efficient, and most importantly those ladies look like they're pretty frickin happy. I bet that tent was a pain in the ass to get the shell-skin over the frame. I never realized just how heavy those things are until I had to build a 5'x10'x7' tent all by myself.

Is that a single exhaust hose portable A/C or is that a dual-hose? I have two of those suckers and they have done the job (not very efficiently though) for a couple Summers now. I was finally able to get a great deal on a mini split a few weeks ago so I'm prepared for next Summer ;) <------caught myself going off on another ADD tangent-fest lol

Subscribed to the thread and looking forward to seeing your progress and the results of your hard work.
No problem man, thanks for looking. . . . . Yeah man, the tents are a pain and definitely not what I'm use to. I went from 20 x 12 built flower room to a 10 x 10 tent (soon to be 2) and a 7 x 12 veg room to a 5x10 tent. Tents are good if your renting but I much rather grow in a built room for obvious reasons. Putting up the tent isn't so bad if you have an extra set of hands but whats sucks about the tents is if the zipper get ruined then your fucked. I just recently gorilla glued some heavy duty velcro strips to my tent flaps and it seems to be doing the job, just have to add a few more strips. . . . . . . The A/C is a dual hose 14,000 btu. and it does a good job keeping temps low. Even with the tent not being fully sealed the room stays around 72 (I don't have the co2 running yet). Once I get the tent fully sealed i'll then run the co2 which should be today. . . . . Nice my brother has a huge mini split and it works great. . . . Once again thanks for looking I'll have some updates tonight hopefully.
 

Dr.Pecker

Well-Known Member
Just curious so please don't think I'm looking for an argument or anything like that when I ask: What makes you wonder about his Co2 levels? I did see that he is supplying Co2 with a 20# aluminum tank but I didn't see anything anywhere in the thread or in the photos having to do with Co2 levels.

With that said, let's not forget that Co2 levels vary greatly depending on multiple factors. Such as, areas near freeways or any other heavy automobile traffic tend to have a much higher Co2 concentration than rural areas or areas that have no automobile traffic. Then theres the factor of where exactly this tent is located. Is it in a basement or some other room that also contains gas-powered appliances? My rooms are in my basement along with my old hot water heater and the furnace that heats my home. I've noticed that Co2 levels are much higher down there then they are on other floors of my house. The top floor of my building stays steady around 300-350 ppm Co2 but my basement reaches double that amount easily (between 600-750 ppm), in the winter when I'm burning alot of natural gas down there.

If you're curious about the levels of Co2 in your area and you would like to take measurements but you are unable to afford one of the many different over-priced meters on the market (even the crappiest ones that only measure in increments of 200-300 ppm are still quite expensive at a few hundred bucks), look into the Autopilot Air Quality Monitor like this one from Amazon:

http://www.amazon.com/AutoPilot-APCEM-Autopilot-Desktop-Monitor/dp/B008NPA18A

I can't say for certain just how accurate they are but they use a digital readout that utilizes 4 numbers unlike the crappy ones that just have a little row of led lights that light up upon co2 levels reaching whatever range the led corresponds to. It's hard to explain but for instance there may be 5 led's and when the first LED lights up it indicates 0-300 PPM, and when the second LED lights up it indicates levels somewhere between the 301-600 range, and then the third LED indicates levels in the 601-900 range, and so on and so on..... These meters leave us completely clueless as to the actual amount of Co2 in the air. The first LED being lit could mean Co2 levels are 100PPM, 150PPM, 155PPM, 200PPM, etc. etc. At least with the Autopilot the accuracy is much greater than a 300 PPM variance. I would love to pick up a Co2 controller that uses a digital readout but the damn things are just SO freakin expensive. Anyone have a source for an reliable AND affordable controller that utilizes a digital readout instead of those crappy LED's like the one in the picture below?



Anyhow, I'm really sorry for jacking your thread OP. Please forgive me as I'm pretty baked right now and I have a tendency to go off on many ADD-fueled tangential ramblings lol

I'm really digging your garden. It's very obvious that you take care of those ladies very diligently. Nicely pruned bottoms, room looks to be designed very well and efficient, and most importantly those ladies look like they're pretty frickin happy. I bet that tent was a pain in the ass to get the shell-skin over the frame. I never realized just how heavy those things are until I had to build a 5'x10'x7' tent all by myself.

Is that a single exhaust hose portable A/C or is that a dual-hose? I have two of those suckers and they have done the job (not very efficiently though) for a couple Summers now. I was finally able to get a great deal on a mini split a few weeks ago so I'm prepared for next Summer ;) <------caught myself going off on another ADD tangent-fest lol

Subscribed to the thread and looking forward to seeing your progress and the results of your hard work.
I use this it costs 20$ for the kit
 

Dr.Pecker

Well-Known Member
Im just asking because one day I checked mine it was 1500 ppm in the grow room and 1500 outside of the grow room. I had to fix a few leaks just trying to make you aware.
 

CashCrops

Well-Known Member
It's a 14,000 btu dual hose a/c by EdgeStar. I bought it on sears.com on sale for like $460 (original like $700) So far so good with it, it definitely does the job.
They work really well, you just have to watch running the dehumidify part of it full time until the end of flowering, I did and it removed more then moisture from the room. Plants had zero smell or taste.
 

NEEDMMASAP

Well-Known Member
They work really well, you just have to watch running the dehumidify part of it full time until the end of flowering, I did and it removed more then moisture from the room. Plants had zero smell or taste.
Hi CashCrop , just a few questions , you said the plants had zero smell and taste , how did that affect the High of the smoking ? Did you extract any oil and if so how was the oil ? Also what was the Temp and Humidity of your grow room ?
 

CashCrops

Well-Known Member
Is that why my dehumidifier water smells like pot
When I dumped the water each night it smelled like my weed should have!
Hi CashCrop , just a few questions , you said the plants had zero smell and taste , how did that affect the High of the smoking ? Did you extract any oil and if so how was the oil ? Also what was the Temp and Humidity of your grow room ?
No oil, The finished cured buds had no smell or taste. The high was there for sure, it was my OG kush, been growing it for years but that was the only time i used a dehumidifier...Never again as I have found better ways to remove moisture
 

Dr.Pecker

Well-Known Member
When I dumped the water each night it smelled like my weed should have!

No oil, The finished cured buds had no smell or taste. The high was there for sure, it was my OG kush, been growing it for years but that was the only time i used a dehumidifier...Never again as I have found better ways to remove moisture
educate me on the other ways
 
Top