Hello, again, RIU!
Thought this might be helpful, to everyone.
Supplies:
(1) 2 L Bottle - Labeled as ACID - $1
(1) Funnel - $1
(1) Box of battery acid - Auto Part Store - $7
(1) Set of measuring spoons - $1
(1) 1 gal of distilled water - $1
Grand Total: $11
Precautions:
BATTERY ACID CAN KILL!!!
So use safety glasses, rubber gloves, and well ventilated areas.
NEVER POUR WATER INTO ACID!!!
Always pour
SMALL amounts of acid in
LARGE amounts of water,
SLOWLY!!!
Procedure:
Fill the 2 L bottle with about 3/4 full with distilled water. This bottle should already be labeled for its intents and purposes.
Prepare your battery acid and measuring spoons.
With your measuring spoons mix the acid from the store with water in a 1:10 ratio.
That is ONE part ACID, TEN parts WATER.
For those lacking mathematical skill: ~180 mL of sulfuric acid in the 2 L bottle.
This should bring the solution from 33% acid to 3.3% acid. Still, VERY DANGEROUS TO STORE AND HANDLE.
Slowly pour the acid into the funnel, into the 2 L bottle making sure that the bottle doesn't over-heat. If it does, you are going to the hospital and forget any holiday pictures from now on.
Once you have enough acid in the container to have the 10:1 ratio, fill the remaining volume with distilled water. Seal the lid and gently turn the bottle up-side down and back until fully mixed. Do this slowly.
Now you should have a handle on mixing this stuff, and you should have enough for two years of constant use.
E