salmonetin
Well-Known Member
....ese rufusss....
...the rele dont have neutral ac wire for work?...
saludos
...the rele dont have neutral ac wire for work?...
saludos
I also have a sail switch monitor the output from my muffler on the inline carbon filter. Loss of air may stink up the place but it will kill the lights and keep from cooking the vegetables.Dandyrandy I think this is more ore less your fail safe setup.
behold the masterpiece
How did you decide on 145F? In the high heat crash test that Supra is doing, and reporting on in the thread on "Heatsinks for DIY LED lamps", he notes "almost stabilized, heatsink above 55C (131F) not good". Maybe a lower threshold would be better?I used a 145deg thermal on each arctic 11.
SSR is a simple switch on the output side, no contacts as it uses a triac for AC, mosfet for DC. The input side is optical so theres no electromagnet....ese rufusss....
...the rele dont have neutral ac wire for work?...
saludos
It will depend on wattage running, heat sink etc. I found on the arctic 11 and no fan and I run around 70 w a cob. Sometimes more. Take a tc probe and check a good spot to attatch the thermat switch. It doesn't take long to heat a arctic11 up with no fan at 70 watts. Experiment. I've worked in Electronic Maintenance for 42 years. I'm 60 now. I work on everything from xray equipment to Fanuc CNC machine tools. We experiment as well. More fun. 1.5million dollar machines. Jet engine parts. Loads more fun with $150,000 parts.How did you decide on 145F? In the high heat crash test that Supra is doing, and reporting on in the thread on "Heatsinks for DIY LED lamps", he notes "almost stabilized, heatsink above 55C (131F) not good". Maybe a lower threshold would be better?
....google...
Manual Reset Temperature Switch Thermostat 65ºC
...seems to me i saw some...
saludos
Sounds like what any sane person suffering from OCD would - for instance, what I might do. Loose cable tie stops fan leading to creation of back-up PSU with auto-transfer switch. But what about the next fallen cable tie? Where's Salmo's thermal switch wired to the fan?
Turns out it was just a cable tie had fell into the fan, cob seems okay as it was only at 500mA.
Built this anway.
...lucky you... i hope sds are ok... ...i know that I... Guod... an SDS were never a Team... but for my pov ...we are the old european team... maybe im only dreaming one more time...i dont mind...and had some correspondence with SDS...
How are your ebay thermal switches doing.I'm usig this one
ebay part number: View attachment 3437529 400926743510