BHO with Vacuum oil/wax tutorial
- Thread starter Guzias1
- Start date
smink13
Well-Known Member
Twitch I don't see the link you were trying to post. Can anyone point me to the best how to. I have read so many methods and tried so many my brain hurts. I read a lot of the posts and you guys seem to know what's up so if anyone can point me in the right direction, I would appreciate it.
Twitch, I saw you said you had an extract company. I'd love it if you could point me to some info or maybe a link to where you probably have mentioned your method for the 10,000th time
Even though the thread isn't as active, there are a lot of us that don't post a lot, that learn a great deal so thanks guys for all the great info so far!
Twitch, I saw you said you had an extract company. I'd love it if you could point me to some info or maybe a link to where you probably have mentioned your method for the 10,000th time
Even though the thread isn't as active, there are a lot of us that don't post a lot, that learn a great deal so thanks guys for all the great info so far!
smink13
Well-Known Member
Yeah my gf hated me for about a week every night cuz I had reading to do!!
I'm about to put in my order for a 3 gal chamber to get me started from bestvaluevac.com
Hoping to make some slabs of some delish shatter! (All my patients want shatter for some reason)
What tech is everyone running these days?! I'm sure everyone has graduated to far greater things!
I'm about to put in my order for a 3 gal chamber to get me started from bestvaluevac.com
Hoping to make some slabs of some delish shatter! (All my patients want shatter for some reason)
What tech is everyone running these days?! I'm sure everyone has graduated to far greater things!
Pbard1
New Member
New member here. Linked from icmag forums. Still wading thru the totality of all posts on this thread. Been extracting for a number of years. Started with Thai Products Iso II back in the day. Open blasted a few years back using a Bimba 1" x 30" SS air cylinder. Now running a bi-flow Transforminator variant.
I look forward to following forums here and hope to have useful info to add.
I look forward to following forums here and hope to have useful info to add.
I have been making BHO for about a year now. l always had problems with the purge. My BHO would always start turning into wax around the edges before it had to chance to purge properly. This gave me an unstable product.
My setup is a Best Value Vacs chamber on a griddle. The griddle is a cheap one so does not hold a constant temp, this was causing my BHO to heat up and cool down too often. I tried using a water bath (so chamber in the water bath, water bath on the griddle) but this was not ideal. I now use a dish filled with fine sand. This sits on the griddle and allows me to set a very constant temperature. Now I can purge my BHO for 24 hours or more and I get a very stable (and beautiful looking) product. I use an infrared temperature meter to check the temp of the sand and the chamber. When I let off the vacuum from time to time I check the temp of the oil itself. I try to keep it around 110 but I think this is strain dependent.
My setup is a Best Value Vacs chamber on a griddle. The griddle is a cheap one so does not hold a constant temp, this was causing my BHO to heat up and cool down too often. I tried using a water bath (so chamber in the water bath, water bath on the griddle) but this was not ideal. I now use a dish filled with fine sand. This sits on the griddle and allows me to set a very constant temperature. Now I can purge my BHO for 24 hours or more and I get a very stable (and beautiful looking) product. I use an infrared temperature meter to check the temp of the sand and the chamber. When I let off the vacuum from time to time I check the temp of the oil itself. I try to keep it around 110 but I think this is strain dependent.
jblegaliza
Member
Bublonichronic
Well-Known Member
Stuff looks tits
jblegaliza
Member
Do not speak English, I translate by google, but I can communicate hehe
Good morning crew , which would be TITS?
Good morning crew , which would be TITS?
jblegaliza
Member
Fron Brazil
R&RHashman
Well-Known Member
tits are boobs. in this case saying something looks tits means something looks really nice. like boobs are really nice.
jblegaliza
Member
The lack of knowing how to speak disrupts but does not prevent communication, follow learning , thanks for the help in comprehension , tkhanks google
kkkkkk
Fadedawg
Well-Known Member
Your English is better than my Portuguese brother, especially when it comes to American slang, in which tits references a woman's breast (tits, rack, wamas, boobs, cleavage, knockers, mammaries, jugs, nips, ................etc), which we consider to be among the very best of things. We also think about them a lot, to have so many fond nicknames for them.
PS: Purdy extract!
Bublonichronic
Well-Known Member
Yes they are right, tits is a good thing
jblegaliza
Member
Hello good night shift, follows more some of my experiences, thank you all for your help
hug
hug
