IF you are new to LED and want help choosing what to buy, POST HERE!

Status
Not open for further replies.
verticalgrow

verticalgrow

Well-Known Member
A

alex69nos

Well-Known Member
verticalgrow said:
HPS would be cheap & better results then a cheap led imho
Click to expand...
verticalgrow said:
Alex, heres 2 Links to owners of tasty & johnson to ask what light is best for your space. Rahz makes the COB lights himself & packs them to send as well lol

https://www.rollitup.org/t/going-commercial.882390/page-15#post-12244015

https://www.rollitup.org/t/johnson-grow-lights-air-cooled-cxb3590-led-fixture.881017/page-5#post-12185404
Click to expand...
Those led lights are beautiful but so expensive..my budget is around 200-250€...hps is cheaper i know but in a closet and without a good air intake they reach very high temps tht's the problem!
 
hillbill

hillbill

Well-Known Member
Can you start small and add? There are some serious products at good prices here using the best components on the planet, producing superior results. Mix and match, do what you must but Cree and vero cob units are obsoleting most all else for smaller folks.
 
verticalgrow

verticalgrow

Well-Known Member
alex69nos said:
Those led lights are beautiful but so expensive..my budget is around 200-250€...hps is cheaper i know but in a closet and without a good air intake they reach very high temps tht's the problem!
Click to expand...
250 pounds is a good budget so the T2 1750 from tastyled for $350 USD would be perfect
 
Johnnycannaseed1

Johnnycannaseed1

Well-Known Member
verticalgrow said:
i cant read spanish & mars is a low quality cheap chinese light
Click to expand...
Agreed Mars is cheap rubbish

Translation with regards to the other light;

Hyper-Intelligent LED lamp for Indoor Growing and Hydroponics
The new LED lamp POWERLED + COB is the latest technology used on the LED lamps to grow indoors or greenhouse . Able to meet the "Grower" demanding that wants a bumper harvest and at the same time save on consumption .
This lamp cultivation actually consumes only 90W +/- 5%.


Construction and Materials Vanguard
The outer case of our POWERLED is built in aerospace anodized aluminum for lightness and strength. It weighs only 1.6kg and allows a faster heat dissipation, while preserving the circuits and power supply groups siyuati inside.


High penetration and intensity of Light
Each module is formed by a COB (Chip on Board) Matrix center LED from 63W with reflecting screen surrounded by four LEDs from LED 3W 6W + 16 Dual Core. Thanks to the lens central ottiva to 105 ° and the other at 75 ° able to concentrate the light beam by increasing the penetration and intensity directly on the plants below. This allows the development of the low part of the plants.


Growth and flowering Extremes
The POWERLED G3 also true LED UV-A Ulta Violets and real LED IR or Far Red guaranteeing a flowering never seen before!


Built with Intelligent Technology High-Tech
The Led Powerled G3 + Cob can be operated manually by activating the 3 channels available (Growth, vegetative or flowering) directly from the buttons on the chest. Or it can be run through the control unit + wireless remote control , reception door where program parameters like: ALBA, SUNNY, CLOUDY, SUNSET and LUNA.
The controller can simultaneously handle 22 sets of LEDs, each group can contain up to 8 LED lamps Powerled G3 .


Technical features of the G3 + Powerled Cob - 135w
1. Power: 135W
2. Real consumption: 90W +/- 5%
3. PAR value to 30cm: 950 umol CO2 m-2.S-1.
4.LUX to 30cm: 33699
5.Spettro Lighting: 10 bands with UV & IR from 380nm to 740nm
6. Available channels: Growth / Vegetative / Bloom / Full AGRO
7. Series connection cable: up to 8 LED Lamps POWERLED G3 +
8. Net Weight: 1.68kg
9. Certification: CE ROHS IP50
10. Range: -10 ° to + 50 ° with humidity at 85%



For knowing how to operate a light for cultivation please consult our guides:
Daylight Hours for indoor cultivation
spectra of light for indoor plants
 
A

alex69nos

Well-Known Member
Johnnycannaseed1 said:
Agreed Mars is cheap rubbish

Translation with regards to the other light;

Hyper-Intelligent LED lamp for Indoor Growing and Hydroponics
The new LED lamp POWERLED + COB is the latest technology used on the LED lamps to grow indoors or greenhouse . Able to meet the "Grower" demanding that wants a bumper harvest and at the same time save on consumption .
This lamp cultivation actually consumes only 90W +/- 5%.


Construction and Materials Vanguard
The outer case of our POWERLED is built in aerospace anodized aluminum for lightness and strength. It weighs only 1.6kg and allows a faster heat dissipation, while preserving the circuits and power supply groups siyuati inside.


High penetration and intensity of Light
Each module is formed by a COB (Chip on Board) Matrix center LED from 63W with reflecting screen surrounded by four LEDs from LED 3W 6W + 16 Dual Core. Thanks to the lens central ottiva to 105 ° and the other at 75 ° able to concentrate the light beam by increasing the penetration and intensity directly on the plants below. This allows the development of the low part of the plants.


Growth and flowering Extremes
The POWERLED G3 also true LED UV-A Ulta Violets and real LED IR or Far Red guaranteeing a flowering never seen before!


Built with Intelligent Technology High-Tech
The Led Powerled G3 + Cob can be operated manually by activating the 3 channels available (Growth, vegetative or flowering) directly from the buttons on the chest. Or it can be run through the control unit + wireless remote control , reception door where program parameters like: ALBA, SUNNY, CLOUDY, SUNSET and LUNA.
The controller can simultaneously handle 22 sets of LEDs, each group can contain up to 8 LED lamps Powerled G3 .


Technical features of the G3 + Powerled Cob - 135w
1. Power: 135W
2. Real consumption: 90W +/- 5%
3. PAR value to 30cm: 950 umol CO2 m-2.S-1.
4.LUX to 30cm: 33699
5.Spettro Lighting: 10 bands with UV & IR from 380nm to 740nm
6. Available channels: Growth / Vegetative / Bloom / Full AGRO
7. Series connection cable: up to 8 LED Lamps POWERLED G3 +
8. Net Weight: 1.68kg
9. Certification: CE ROHS IP50
10. Range: -10 ° to + 50 ° with humidity at 85%



For knowing how to operate a light for cultivation please consult our guides:
Daylight Hours for indoor cultivation
spectra of light for indoor plants
Click to expand...
Do u think is good for two plants this one? It can be comparised with a 250 HPS maybe?
 
A

alex69nos

Well-Known Member
verticalgrow said:
400W is better imho
250w = 2 x 2'
400w = 3 x 3'
600w = 4 x 4'
1000w=5 x 5'
Click to expand...
2 x 2' i think is enough for two plants u don't think so?!
do u think is better a 135w led with one 63W central cob + 4 x 6W led + 14 x 3W dual core led;
or a 140w dimmable led with 5 W chips?
Thanks for your help guys
 
verticalgrow

verticalgrow

Well-Known Member
alex69nos said:
2 x 2' i think is enough for two plants u don't think so?!
do u think is better a 135w led with one 63W central cob + 4 x 6W led + 14 x 3W dual core led;
or a 140w dimmable led with 5 W chips?
Thanks for your help guys
Click to expand...
not really because the plant canopy will be a bigger area then the grow pots also
a 400w could yield 200-300 grams of buds & 250w will be less then 200 grams.
3w & 5w leds are old tech better to go with COBS, they get 1gpw of buds.
 
A

alex69nos

Well-Known Member
verticalgrow said:
not really because the plant canopy will be a bigger area then the grow pots also
a 400w could yield 200-300 grams of buds & 250w will be less then 200 grams.
3w & 5w leds are old tech better to go with COBS, they get 1gpw of buds.
Click to expand...
Understood...and do u think is better to build it? Coz the cob one is about 220€ and is only 130W
 
Status
Not open for further replies.
Top