A Cannabinerd's Journey

[AlphaPhase]

Mmm the glueeee

 

[Dr.D81]

Right on bro! I'll put something together for ya


Thanks bro! The blueberry muffin pheno sounds bad ass! I read that it is one hell of a hash plant


Hell yeah bro! I want to run a pack of the 24k wg eventually, I only had 1 seed and it turned out pretty damn good so with a 10 pack you'll find something straight up fire bro

Your the man

 

[Aeroknow]

Mmm the glueeee
View attachment 3604245

So did you order up a spinpro trimmer? If so, man, I don't know how well that will work with a strain like gg4. Ghostrider is perfect for it, but then again, wait til you harvest the ghostrider. So fucking easy to trim. The glue is tough one fo sho though. Well, that's what my trimmer says at least

 

[Aeroknow]

@Dr.D81
Did you get any of that ghostrider from that jar of it I brought to the bbq? We need to get you that cut. It rocks!! Makes me wanna order shit loads more of Karmas gear. Just a single pack of that ghostrider v2.0 and most were keepers.

@AlphaPhase
Those 3 karma og phenos will finally be ready to hit the flower room in a bout a week or so

 

[AlphaPhase]

So did you order up a spinpro trimmer? If so, man, I don't know how well that will work with a strain like gg4. Ghostrider is perfect for it, but then again, wait til you harvest the ghostrider. So fucking easy to trim. The glue is tough one fo sho though. Well, that's what my trimmer says at least

Yeah I got a hydro planet brand, they all look about the same so I went with a mid / higher priced one, it was on sale though for 160 so not too bad. I don't have high hopes for it working with the glue tho lol. But if it works for anything I figure it'll save some time and energy. I found someone that'll do the trimming for 150 a unit but right now with prices so low I'm hoping the spin trimmer helps a bit until prices go back up

 

[AlphaPhase]

@Dr.D81
Did you get any of that ghostrider from that jar of it I brought to the bbq? We need to get you that cut. It rocks!! Makes me wanna order shit loads more of Karmas gear. Just a single pack of that ghostrider v2.0 and most were keepers.

@AlphaPhase
Those 3 karma og phenos will finally be ready to hit the flower room in a bout a week or so

Hell yeah dude, the karma OG will be straight fire, I haven't seen a bad pheno yet there seems to be 4 or 5 phenos

 

[Aeroknow]

Yeah I got a hydro planet brand, they all look about the same so I went with a mid / higher priced one, it was on sale though for 160 so not too bad. I don't have high hopes for it working with the glue tho lol. But if it works for anything I figure it'll save some time and energy. I found someone that'll do the trimming for 150 a unit but right now with prices so low I'm hoping the spin trimmer helps a bit until prices go back up

Hopefully you can trust that person bro. Bunch of fucking broke ass snakes around here. Watch out.

 

[Dr.D81]

Hell yea I want a gr cut and a cookies cut if it happens to be around shot me a pm sometime. I have a ton of Karmas Og crosses started. Swamp wrecked X kog , sfv og X kog, goji f2 X kog

 

[AlphaPhase]

Hopefully you can trust that person bro. Bunch of fucking broke ass snakes around here. Watch out.

True that. I know this guy real well though, just not sure how well he can trim, he said he's trimmed a lot so I'm gonna give em a small batch to see how it comes out and go from there

 

[AlphaPhase]

Hell yea I want a gr cut and a cookies cut if it happens to be around shot me a pm sometime. I have a ton of Karmas Og crosses started. Swamp wrecked X kog , sfv og X kog, goji f2 X kog

Oh man the sfv OG kog sounds crazy good, like a back cross almost that should be Hella lemon fuel when's the eta flower time gonna be on that one?

 

[Dr.D81]

Oh man the sfv OG kog sounds crazy good, like a back cross almost that should be Hella lemon fuel when's the eta flower time gonna be on that one?

Next cycle

 

[AlphaPhase]

So I figured out this maxibloom I think. I've been starting the clones way too low at around 600ppm, it works for my clones out of the Aero cloner for some reason, but that aside, I pumped up the nutes to about 1100ppm, the diamond OG and black lime reserve started growing and looking better over night, the mendo are still in bad shape but they'll pull through so I can take some cuts soon.

The clones I got from Aero I started at 450ppm and then ramped it up to 1000ppm. The only strain that burned slightly was the gsc but no biggy. So the ppm sounds about right for clones with most other nutes I've used, but still will be switching to veg+bloom for veg. Will still use maxi for flower though, at least for now.

So 1.3ec-1.6ec for rooted cuts is the new formula, right on track with what adower said the v+b should be. Give or take a little for nute sensitive plants, like the gsc, but no lower than 900ppm I'd advise. (mostly personal notes here lol)

And this is what nute burn looks like. It's so freaking hard to tell between burn and deficiencies since they look damn near the same but this is the burn that I know of and seen before, I should have known it wasn't nute burn on the mendo since they looked like shit for so long, looked like they had every deficiencies all at once but I was too scared to up the nutes. Learn from my lesson if it doesn't look similar to this it's most likely due to not enough nutes lol

 

[supdro]

So did you order up a spinpro trimmer? If so, man, I don't know how well that will work with a strain like gg4. Ghostrider is perfect for it, but then again, wait til you harvest the ghostrider. So fucking easy to trim. The glue is tough one fo sho though. Well, that's what my trimmer says at least

Glad you mentioned the spinpro. What experiences do you have with it?

 

[Aeroknow]

Glad you mentioned the spinpro. What experiences do you have with it?

Chunky/cylindrical type buds=works ok.
But those easy type of buds are better off trimmed by hand, Mine and my friends experience.
It sucks, but hand trimmed is always where its at. Even outdoor

 

[AlphaPhase]

I figure with as much scissor and finger hash that comes off during hand trimming, it should be comparable at least with the spin trimmer, lots and lots of resin comes off using scissors so I can't see much more coming off with a few spins but we'll see, it's Def worth a shot for sure

 

[a mongo frog]

I figure with as much scissor and finger hash that comes off during hand trimming, it should be comparable at least with the spin trimmer, lots and lots of resin comes off using scissors so I can't see much more coming off with a few spins but we'll see, it's Def worth a shot for sure

Why the machine trim all the sudden? Your a top tier gardener. I don't get it.

 

[AlphaPhase]

Why the machine trim all the sudden? Your a top tier gardener. I don't get it.

Well from reading around and seeing pics of hand trim vs spin trim, there's a good handful of people that say the spin trimmer doesn't beat up the buds nearly as bad as the tumbler kind of electric trimmer and when trimming with scissors there's tons and tons of resin getting sheared off, I figure give it a shot, at least for the smaller buds, see how it comes out, if I can't tell the difference under my scope, it'll save me some quality time for funner things, as fun as trimming is

 

[a mongo frog]

Well from reading around and seeing pics of hand trim vs spin trim, there's a good handful of people that say the spin trimmer doesn't beat up the buds nearly as bad as the tumbler kind of electric trimmer and when trimming with scissors there's tons and tons of resin getting sheared off, I figure give it a shot, at least for the smaller buds, see how it comes out, if I can't tell the difference under my scope, it'll save me some quality time for funner things, as fun as trimming is

Do you hate trimming?

 

[AlphaPhase]

Do you hate trimming?

Yes it's my least favorite activity lol - it takes me like 6+ hrs a lb and I get easily bored of it so it takes even longer and my back is really bad along with my hands have nerve damage from a piece of glass that I fell on a while back, so it's hard and just sucks I'll probably hire a trimmer eventually but I'm just trying to keep up and do what I can for now. I Def wont use the trimmer if it affects quality even a little, but if it doesn't I'll never go back to scissors. High hopes I know, but I hear if the trimmer is good quality and you go slow it should be OK but we'll see. It sounds too good to be true but if I'm only using it for small buds, it might actually come out better because small buds get handled ALOT during trimming by the gloves and scissors, they basically get full coverage of demolition by the time it's trimmed lol

 

[a mongo frog]

Yes it's my least favorite activity lol - it takes me like 6+ hrs a lb and I get easily bored of it so it takes even longer and my back is really bad along with my hands have nerve damage from a piece of glass that I fell on a while back, so it's hard and just sucks I'll probably hire a trimmer eventually but I'm just trying to keep up and do what I can for now. I Def wont use the trimmer if it affects quality even a little, but if it doesn't I'll never go back to scissors. High hopes I know, but I hear if the trimmer is good quality and you go slow it should be OK but we'll see. It sounds too good to be true but if I'm only using it for small buds, it might actually come out better because small buds get handled ALOT during trimming by the gloves and scissors, they basically get full coverage of demolition by the time it's trimmed lol

Trimming a unit in 6 hours is fucking super fast. I can't do a unit in 8 hours. The only trimmers I've seen are the ones that shave the outside of the buds and by the looks of your bud you don't trim like that.