Mini Gorilla Tent Grow Club

[The Dawg]

Dawg trumps.
Heatsink must be inside tent.

How about you put heatsink inside rigid build, but cut top over heatsink for cooling? That way ur heatsink is still in tent. I dont think that breaks the rule. Dawg might be fine with that and not hit you with rule #1

Nice Compromise But Must Have Non Removable Screen Covering Hole.

 

[bicit]

Nice Compromise But Must Have Non Removable Screen Covering Hole.

Lol what? Am I supposed to weld it to dry wall lol

 

[The Dawg]

Kids These Days. You Cant Weld Dry-Wall However You Can Use Spackling

After thespacklingis completely dry, you want to sand it smooth. The idea is that you want it flush with the wall or ceiling surface and smooth to the touch. Sand lightly with a sanding sponge until the surface is ready for paint. If you feel a depression, you need to apply another coat ofspacklingpaste to fill it

 

[The Dawg]

Lol what? Am I supposed to weld it to dry wall lol

Or How About Sheet Rock Screws To Secure Screen

 

[bicit]

Kids These Days. You Cant Weld Dry-Wall However You Can Use Spackling

After thespacklingis completely dry, you want to sand it smooth. The idea is that you want it flush with the wall or ceiling surface and smooth to the touch. Sand lightly with a sanding sponge until the surface is ready for paint. If you feel a depression, you need to apply another coat ofspacklingpaste to fill it

Spackle and paint makes a carpenter what he ain't. I'll need tube of the gallon by the time im done lol

May I ask what the point of the screen is? Im not going to do the hole idea but im not following your thoughts

 

[The Dawg]

Spackle and paint makes a carpenter what he ain't. I'll need tube of the gallon by the time im done lol

May I ask what the point of the screen is? Im not going to do the hole idea but im not following your thoughts

To Keep Your Fins Inside Of Your 12x12x24 Encloser. You See If I Allow Your Fins I Would Have To Allow Purplebudz Res To Be Outside Also

 

[bicit]

To Keep Your Fins Inside Of Your 12x12x24 Encloser. You See If I Allow Your Fins I Would Have To Allow Purplebudz Res To Be Outside Also

I have different plans if my ebay purchases get here in time. Just have to ponder the meaning of the box, then work from within.

Gonna copy observe and report, should be interesting

 

[Psyphish]

I've done multiple grows in space that was 10x10x20 inches, I managed to fit EVERYTHING (except for the 120mm computer fan) in the space, even the drivers for the 150w chinese COB fixture.

Having reservoirs and huge ass heatsinks outside the space would be cheating IMO. If you can't have a reservoir, don't use hydro.

[url=http://i.imgur.com/8UhKL00.jpg][/URL]

 

[guod]

Do i need to use a 10K pull up resistor for the PWM wire of LDD

on reset all ports have an initial value of null, corresponding to high impedance input. this can also be seen as an open switch.
you need a pull down resistor (4.7k to 10k) to give a off signal for the LDDs on reset.

BTW.
Analog dimming with the LDDs

 

[robincnn]

@guod Thank you. I used a 5.6K pull down on all LDD
Now the light do not flash when arduino resets
Problem solved.

 

[PurpleBuz]

Start date has not been decided yet.
How about 2nd week of April.

whats the start date ?

and I can use whatever clones I have sitting around ?

any restriction on light period ?

 

[robincnn]

Looks like we have 4 rules
1)I'm Always Right
2)You Have To Grow In A 1X1X2
3)You Have To Use Some Type of Led And Except The Driver Fan And Filter Everything Else Has To Be Inside The Tent
4)If You think Op Is Wrong Refer To Rule #1

 

[The Dawg]

Ok Fellow Mini Growers What Start Date Would be Fair To All. Keep In Mind That Some Members Are Building Their Enclosures

 

[bicit]

April 10th-15th should be fine for me.

 

[Psyphish]

This tent is awesome, can't wait to get the proper lights and fan.

[url=http://i.imgur.com/aHeSxan.jpg][/URL]

 

[robincnn]

I am fine with 10-15th too.

This gorilla tent is good for demo but not as convenient for growing as the front opening is too small.@Psyphish I like your tent as it is much easier to access the front.
In my tent the side light blocks access from front. I will have tough time taking plants out when they get big.

 

[The Dawg]

Ok Fellow Mini Growers Lets Start On My Birthday Yep 4-20 ???

@Alienwidow Here Kitty Kitty Kitty

 

[The Dawg]

This tent is awesome, can't wait to get the proper lights and fan.

[URL='http://i.imgur.com/aHeSxan.jpg'][/URL]

http://i.imgur.com/nrcm8Ca.jpg
Man I'm Digging the Skull. I Just Hope I Don't Get Skull Fucked

 

[robincnn]

Dawg do we start with just 1 only or 2-3 and then choose what to go with later. 4-20 we start with seed or seedling/cutting.
Is it 12/12 from start or we have a small 18/6,24/0 window

 

[The Dawg]

Dawg do we start with just 1 only or 2-3 and then choose what to go with later. 4-20 we start with seed or seedling/cutting.
Is it 12/12 from start or we have a small 18/6,24/0 window

I'm Good With That. My Question Is Why You Would Want To Veg With Only 24 Inches Of Height You Getting The Bugs Work Out Of The Hal-9000