Airwalker16
Well-Known Member
So these PCBS from vitali are $68/ec? I'm definitely going to buy 4 for my light. They're PERFECT!!
DIY with Chilled PCB's and cxb3590
- Thread starter spcFLETCH
- Start date
-
- Tags
- diy cob pcb
Airwalker16
Well-Known Member
Yo, @spcFLETCH is that just standard 5.886" from heatsinkusa?
I think I'll buy 3-4 of these and use some pin sinks to add to the middle of my diy light since my gogreenled is way to intense. $68/ec?
spcFLETCH
Well-Known Member
They are great lights, easy to use. The parts are all listed on thedankden.com
taps, drill bits etc...
spcFLETCH
Well-Known Member
Hey Man! The Heat sink is the 4.9" profile. If you wanted some pin heatsinks, you could try Vitalys' extruded aluminum sinks. Hes got them on sale. So you could buy the sinks, light engines, and the lens array for 75$. You would just need individual fans for each one.
spcFLETCH
Well-Known Member
You can Buy the drivers on there too! Cheap!! $57 bucks. Ive got a few myself now. Nice 200w drivers man
spcFLETCH
Well-Known Member
I would do 4, fits perfectly on the 200w driver you can buy from his site for 57$
Airwalker16
Well-Known Member
I'd rather use pin sinks. The rouND ones you see a lot lately here. They're passive up to 50-75 watts. I've got 4 fans already :/ But I wanted to add red and blue to my 8 CXB3590 light and these seem just perfect.
Last edited:
spcFLETCH
Well-Known Member
Cool. Passive is legit. No worries on an extra fan driver crapping out. Good choice my dude. Knowledge! These lights offer a great spectrum. You will really like them. I emailed Vitaly after I saw your post and he made these setups available for discounted kits... So thank you from him=)
ttystikk
Well-Known Member
Passive may be simpler but cooler is always better.
Airwalker16
Well-Known Member
These are ran @ 700ma I honestly think his whole water/duct cooling is waaaay overkill.
So what's the discounted price from the 260 for just the PCBS?
Airwalker16
Well-Known Member
Well tell us so we can see if we can believe it or not!!!! ???
spcFLETCH
Well-Known Member
260 for pcbs 310 I believe for 4 pcbs + the driver. Not their sales rep haha. Just trying to help some people out. Follow the link I provided. It tells all.
https://chilledgrowlights.com/
Follow this one and check out the output... Then look into the "our products" section. I hope this helps @Airwalker16
Remember, I'm testing 3 lights. This is the first of 3. However, this is very promising. I would not pass this up.
weed-whacker
Well-Known Member
Airwalker16
Well-Known Member
So they're more expensive thn cxb3590's damn
spcFLETCH
Well-Known Member
Yea. If you were on the fence about it, wait to see how they perform compared to the cxb.. The cxb3590 got tested in an integrated sphere as well. Vitaly is releasing the results after my grow. He thinks it will be valuable to those who are relying purely on efficiency #'s.. I'm only interested in testing the best shit period. Which is why I ordered the Cxbs in the first place. Getting new sinks from plc as well, and they are badd ass pin sinks pre-drilled for the cobs and the optics. I don't get paid for advocating these companies... this is for you guys
spcFLETCH
Well-Known Member
If you visited the site, you would know this AW?? What is it that you are trying to accomplish here? This is meant to give people more options, not to fulfill a need to provide useless commentary while bored.
spcFLETCH
Well-Known Member
Chilled tested the PCB's module against the cxb... he's giving me the #s after the growoff.. it was put into the sphere. So,yup we will get to see the results
What's this round tester called?
spcFLETCH
Well-Known Member
Integrated sphere. I'm no expert in laboratory testing... but I'd like to play around for a day or two in there haha
spcFLETCH
Well-Known Member
https://chilledgrowlights.com/product-category/prototype-grow-lights-used-for-rd-basement
If you guys want a good deal on some powerful lights.
If you guys want a good deal on some powerful lights.
