Diy with some citizen clu048 1212 you need around 30w per sq ft if you go solar storm you probably need more like 40w/sqft of actual power draw. Citizen diy will be your best low cost option.I either have to dump or get off the pot. I would like to go DIY but I'm really still unclear how many of what COBs I need for a 4x4x5 area. Is six CBX3070's or CXA3590' enough and what sort of mix of COBs should I be aiming for. Do i need Cree or Meanwell drivers or can i save some money on that end? A blend 3000k, 3500k or 5000k or just all of one kind. I'm prepared to leave room in the array for supplemental lighting not requiring a driver. I would pull the trigger on the solar storm but the coverage area for flowering is only a 3x3 footprint but for vegging it's 6x6. I'm coming out of the gate with two 4x4x5 foot sections so I've gotta double down right from the start. I'm either ordering the stock to DIY today or ordering TWO fixtures. I just can't get a handle on the DIY path. I can wire chit up with no worries I just don't know what to wire. Thanks for your help and I'm going to go find a sharp stick to jab in my eye.