joey.bagadonuts
Well-Known Member
I found a cool tube on eBay for $37. I will have to buy 6"-4" adapters and some more ducting but I think I can make it work. My only struggle is the small space I have to work with.
My 400w MH/HPS Super Skunk Grow
- Thread starter joey.bagadonuts
- Start date
applejuicer10
Well-Known Member
I am not a fan of cool tubes, they are garbage at light dispersion. Only really good for vertical grows. A good closed hood is relatively cheap used. What part of the country are you in?
applejuicer10
Well-Known Member
Half ass example of lollipoping for you. Maybe give you the idea
Attachments
Olive Drab Green
Well-Known Member
..General Hydroponics is a no-name brand? Or did you only get their pH Up/Down?
joey.bagadonuts
Well-Known Member
I got their pH up and down kit. But now that I think about it, the kit I bought on eBay said I would get GH MaxiGrow and MaxiBloom. But the nutrients I got were in zip lock bags. So I was not certain.
joey.bagadonuts
Well-Known Member
Week 6 Update
I am growing a monster here folks. She gets bigger by the day. I did not buy an air cooled hood. I'm going to try and make it through this grow without one. I turned my light ballast back to 75% and I also rotate frozen water bottles into the tent 2 times a day. This keeps my temps around 85F.
I did a water change in my res and made it 500PPM. I check pH every few days and maintain it around 5.5-6. Roots are looking healthy and big!
I have been tucking every 2-3 days. Some colas are taller than others due to my 4x4" screen squares. But overall it's a relatively even canopy. I now have 23 bud sites forming (shown in red below)
Most likely I will be flipping to 12/12 tomorrow. I'll give her one more week of stretching to fill out the screen and then it's off to the races!
I'll end this update with a nice picture of my 4 way stalk. She is getting pretty beefy.
What do you all think? Am I ready to flip to 12/12???
I am growing a monster here folks. She gets bigger by the day. I did not buy an air cooled hood. I'm going to try and make it through this grow without one. I turned my light ballast back to 75% and I also rotate frozen water bottles into the tent 2 times a day. This keeps my temps around 85F.
I did a water change in my res and made it 500PPM. I check pH every few days and maintain it around 5.5-6. Roots are looking healthy and big!
I have been tucking every 2-3 days. Some colas are taller than others due to my 4x4" screen squares. But overall it's a relatively even canopy. I now have 23 bud sites forming (shown in red below)
Most likely I will be flipping to 12/12 tomorrow. I'll give her one more week of stretching to fill out the screen and then it's off to the races!
I'll end this update with a nice picture of my 4 way stalk. She is getting pretty beefy.
What do you all think? Am I ready to flip to 12/12???
Last edited:
growman3666
Well-Known Member
Looking good brother.
The decision to switch is based soley upon what your trying to accomplish. If it were me id wait one more week for her to fill in a little more then flip her.
You could flip right now though and be fine
The decision to switch is based soley upon what your trying to accomplish. If it were me id wait one more week for her to fill in a little more then flip her.
You could flip right now though and be fine
joey.bagadonuts
Well-Known Member
I think I'll just take it day by day. I'm going to hold off for now. Maybe I'll flip middle of next week. I just don't want it to get over crowded and then have my bud tips too close to the light. Super skunk is a 10 week flower according to NirvanaLooking good brother.
The decision to switch is based soley upon what your trying to accomplish. If it were me id wait one more week for her to fill in a little more then flip her.
You could flip right now though and be fine
thenotsoesoteric
Well-Known Member
Be careful with the temps. 85 is going to be really hot for flowering especially with you doing DWC. That reservoir temp is crucial anything over 72 and you're inviting root rot. If there is any way you can swing a can fan and air cooled hood you'd be helping yourself out. The up coming fall should help as temps drop but just be vigilant because root rot happens rather quick. Other than that the plants looking great hope it works out for you.
joey.bagadonuts
Well-Known Member
After some more reading, I decided to order a cool tube and some more ducting to help with temps. Hopefully it should be here by next week.
Anyway, I still have lights on 18/6 as of today. I think I am going to hold off the flip a few more days. I'll post pics this weekend.
Anyway, I still have lights on 18/6 as of today. I think I am going to hold off the flip a few more days. I'll post pics this weekend.
joey.bagadonuts
Well-Known Member
Week 7 Update
I officially flipped to 12/12 today and I switched my bulb to the HPS. I am expecting to have my cool tube hood within the week. My temps are still 85F and the roots are looking healthy. Now for the pics!
I am counting about 25 total tops. I might get a few more that stretch above the canopy in the next week or so. (See pic below)
I also decided to do some light lollipopping. I trimmed some of the lower growth that was not getting any light. I also trimmed some of the dying fan leaves. Here's how she looks now (see below)
Any suggestions??? When will I see pistols? Lol
I officially flipped to 12/12 today and I switched my bulb to the HPS. I am expecting to have my cool tube hood within the week. My temps are still 85F and the roots are looking healthy. Now for the pics!
I am counting about 25 total tops. I might get a few more that stretch above the canopy in the next week or so. (See pic below)
I also decided to do some light lollipopping. I trimmed some of the lower growth that was not getting any light. I also trimmed some of the dying fan leaves. Here's how she looks now (see below)
Any suggestions??? When will I see pistols? Lol
applejuicer10
Well-Known Member
You'll probably start seeing small pistils on some of the highest node areas within the week.
I would cover that net pot/hydroton to help with water temps... Rez temp over 72f and you are asking for a failed crop. Try a frozen water bottle or chilling your refill water before adding it.
I would cover that net pot/hydroton to help with water temps... Rez temp over 72f and you are asking for a failed crop. Try a frozen water bottle or chilling your refill water before adding it.
joey.bagadonuts
Well-Known Member
I've been using cold water every time I fill the res. I also keep a frozen water bottle next to the res to help keep the temp down a bit. When my air cooled hood gets delivered, I should be good.
joey.bagadonuts
Well-Known Member
Help me guys!
I just switched to HPS and 12/12 a few days ago.
I am running a 3.5g DWC Scrog. I've been using GH MaxiGrow around 700PPM. I just switched to MaxiBloom around1000PPM.
It's a 400w light. It's 16" from the plant.
Ever since I switched lights, the new growth and fan leaves are curling down like a claw. They are also looking a bit yellow.
Temps are about 80F. I always use cold water in my res and I keep a frozen water bottle next to the res.
Pics
At first I thought it was over watering or my water level was too high or maybe my air stone was clogged. I Flushed the bucket and lowered the water level way down but it has not helped.
Any suggestions???
I just switched to HPS and 12/12 a few days ago.
I am running a 3.5g DWC Scrog. I've been using GH MaxiGrow around 700PPM. I just switched to MaxiBloom around1000PPM.
It's a 400w light. It's 16" from the plant.
Ever since I switched lights, the new growth and fan leaves are curling down like a claw. They are also looking a bit yellow.
Temps are about 80F. I always use cold water in my res and I keep a frozen water bottle next to the res.
Pics
At first I thought it was over watering or my water level was too high or maybe my air stone was clogged. I Flushed the bucket and lowered the water level way down but it has not helped.
Any suggestions???
Cali Cropper
Active Member
Do roots have enough room in there? They look crammed.Maybe a bigger bucket??Help me guys!
I just switched to HPS and 12/12 a few days ago.
I am running a 3.5g DWC Scrog. I've been using GH MaxiGrow around 700PPM. I just switched to MaxiBloom around1000PPM.
It's a 400w light. It's 16" from the plant.
Ever since I switched lights, the new growth and fan leaves are curling down like a claw. They are also looking a bit yellow.
Temps are about 80F. I always use cold water in my res and I keep a frozen water bottle next to the res.
Pics
At first I thought it was over watering or my water level was too high or maybe my air stone was clogged. I Flushed the bucket and lowered the water level way down but it has not helped.
Any suggestions???
joey.bagadonuts
Well-Known Member
There is still a decent amount of space left in the bucket. I don't think that's it
joey.bagadonuts
Well-Known Member
I just went out and bought a 5 gallon bucket just incase. Hopefully this helps
My cool tube arrived and I installed that last night also. Temps are down to 77F
applejuicer10
Well-Known Member
Try wrapping a towel or thick blanket around the bucket, some type of insulation on it. The reason the leaves droop in other mediums due to over watering, is because the roots are too wet to get oxygen to them. Same concept in DWC when the Rez temps get over 72f.
You see , after 70f the ability of water to hold dissolved oxygen decreases tremendously and actually mimics the problems with over watering.
TL;DR cooler water will stop the wilt
You see , after 70f the ability of water to hold dissolved oxygen decreases tremendously and actually mimics the problems with over watering.
TL;DR cooler water will stop the wilt
joey.bagadonuts
Well-Known Member
So if I can maintain my res temp below 70F do you think my plant will recover? It is curling and twisting really bad. I don't want to lose out on yield.Try wrapping a towel or thick blanket around the bucket, some type of insulation on it. The reason the leaves droop in other mediums due to over watering, is because the roots are too wet to get oxygen to them. Same concept in DWC when the Rez temps get over 72f.
You see , after 70f the ability of water to hold dissolved oxygen decreases tremendously and actually mimics the problems with over watering.
TL;DR cooler water will stop the wilt
applejuicer10
Well-Known Member
Do you have a way to check your Rez temp? Because that would tell us the problem for sure, but I'm about 98% sure it's a DO issue now that the plants are going into the stretch full swing and growing hard. With no real chilling in the Rez, even with that bottle outside... I reckon it only takes 4 gallons of water about an hour or 2 to become the same temp as the ambient temp of the room. So 75-80f water all the most of the time.