yellow tint

buster1977

buster1977

Active Member
I know it's hard to see because of the lights but there getting yellow tint... There 2 weeks into flower any info would help thanksIMAG1412.jpg
 
Anyone have any ideas on what I'm doing wrong? Would hate to lose em I got two more off picture that drooped like that too... Had em outta the water maybe 5 min to change water and they just started drooping. But there not yellowish like the ones in pic using the same nutes on both totes
 
How often, what concentration and what are you giving them?
Could be nitrogen deficiency. Could be pH imbalance. We need more info to help you further.
 
I'm just using maxibloom switched over to that 2 weeks ago I did half nutes last week did almost full this week 1 teaspoon per gallon that's all I'm using
 
I assume you're doing dwc? What's you water temp, are you using tap water, are the roots white, and what's your pH? I use maxibloom also and never have a problem. Is your airstone working properly?
 
My roots are pink of course from the maxibloom but up by the net pots there a little brownish not slimy tho. I use tap well water and I'm testing ph today after work never tested it
 
buster1977 said:
My roots are pink of course from the maxibloom but up by the net pots there a little brownish not slimy tho. I use tap well water and I'm testing ph today after work never tested it
Click to expand...
I use GH Maxi-Grow/Bloom in perlite/vermiculite hempy

My tap water is about 7 pH...after adding the Maxi-Grow/Bloom the pH drops super low (about 4 pH)

If you are not adding pH+, then chances are that your pH is way too low

GH pH test drops will get you in the ballpark if you don't have a test pen

BTW: I also have to add Cal-Mag (5ml / Gallon) as my water is very pure....this may or may not be an issue for your tap water
 
Just got home checked on em and there purked back up nice... I'm definitely gonna test ph... Looked at my roots again and there is no brown at all pure pink so my only issue now is the yellow tint I hope it's the ph... Also was wondering if anyone else has had the problem with them drooping when you take them out to change water? Or is there a way to prevent it? It was bad and they never did that before
 
ISK said:
I use GH Maxi-Grow/Bloom in perlite/vermiculite hempy

My tap water is about 7 pH...after adding the Maxi-Grow/Bloom the pH drops super low (about 4 pH)

If you are not adding pH+, then chances are that your pH is way too low

GH pH test drops will get you in the ballpark if you don't have a test pen

BTW: I also have to add Cal-Mag (5ml / Gallon) as my water is very pure....this may or may not be an issue for your tap water
Click to expand...
Very helpful thanks
 
  • Like
Reactions: ISK
You must log in or register to reply here.
Back
Top