dandyrandy
Well-Known Member
The budporn pic is sweet.
Extrusion length is the same. 310mmIs the footprint the same? Outside dimensions?
I see no issues with future retrofit since it is slightly larger. Thank you! I'll quit bugging you.Extrusion length is the same. 310mm
Width of slate 1 is 198.5mm
Width of slate 2 is 205mm
Both are designed to fit 1 board in center.
That is completely wrong you need 24 optics from arrow.See this post on page 1 for details on optics.
You can click on the link and it takes you to the findchips.
https://www.rollitup.org/t/diy-with-quantum-boards.927159/#post-13147322
http://www.findchips.com/search/F14304_FLORENCE-1R-Z90
Click on in Stock only
View attachment 3870425
Arrow and future are in $2.5 -$3 range
Mouser is crazy expensive. CDI seems to have 45MOQ
Arrow for 8 pcs is $30
View attachment 3870429
Lets try Future electronics 2.84*8= $22.72 + Shipping
View attachment 3870430
So the optics are $20-22 per board + Shipping
i ordered 8 from arrow have you ever only ordered 8?
F14304_FLORENCE-1R-Z90
LEDIL OY
LENS RECT 19.5 X 286MM 7MM WWW
Estimated Ship Date
December
20
Ships from: US
Quantity: 8
Unit Price: $2.4000
Line Total: $19.20
Here's my order from arrow it covered less than 3 rows of led
Yep 2 in series as many "strings" as you like.With the 320-1400, NGL engineering page shows a 2 parallel + 2 series (2p+2s). Can this be furthered to 3 parallel + 2 series (3p+2s)? If I understand correctly the Vf is the same just the current is in thirds instead of halfed.
If correct, the 4 qb's (2p+2s) would be @ .7a, so 6 qb's (3p+2s) would be @ .466a, roughly 48w a board?
It's not worth the trouble after seeing the optics I'm glad I didn't waste any more money these. Did you double check your order to make sure you got all of yours?Somebody messed up..... Look at the description size. I would call arrow and complain. They will fix it.
Ok I will need a driver or 2 eventually so thats why I was askingno,half of those are from rahz's sale but i do need them to finish the other side of my room/shop.
what holds these lenses in place? man a one piece lense for these boards would be nice,prolly sell like hotcakes to
LOL! Classic line.
We ordered solid cases. Yeah they were full.It's not worth the trouble after seeing the optics I'm glad I didn't waste any more money these. Did you double check your order to make sure you got all of yours?
This is very helpful, but would be much more awesomer if you also listed what the wattages per board in each config would be.Napalm D wanted lots of extra power as he will use the same lamp later in 3x3 or a 4x4.
Captain's lamp with HLG 240-2100's has enough power.
2×3x5
You can use a HLG-185-1400 with 2 or 4 boards in parallel
You can use a HLG-185-700 with 2 in series or 2x2=4 boards parallel-series wired
HLG-240 will be $10-$15 more but gives you more power. Just in case you need it
2 boards on a HLG 240-1050 series wired
3 boards on a HLG 240-2100 parallel wired
4 boards on a HLG 240-1050 parallel-series wired
https://northerngrowlights.com/pages/engineering
I have a 2x2.5
and 2 boards on a HLG 240-1050 series wired
2 boards on a HLG 240-1050 series wiredThis is very helpful, but would be much more awesomer if you also listed what the wattages per board in each config would be.
Idk why but im still having the hardest time understanding these dang boards and parallel wiring
Original Heatsink (side view) SLATE 1
1.85Kg/Meter density
100+ pcs of 'slate 1' expected to be air shipped to us next week so will stock in 10-14 days.
60+ pcs of old 'slate 1' heatsinks in sea shipment expected to arrive in 4 weeks
New Heatsink (side view) SLATE 2
2.4Kg/Meter density. Taller and serrated fins for boards running at higher power.
New heatsink will be ready in 10 days. should be in stock end of this month.
View attachment 3870411
Hole patterns will be same for both as board size is same.
New 3X Board heastink using same extrusion as SLATE 1, just longer. SLATE xx
Limited samples of new heatsink . same extrusion as 'slate 1', just 3 times longer to fit 3 boards on single heatsink. 10-14 days.
View attachment 3870413