DIY with Quantum Boards

KeyStoned

Member
Hey guys I'm new here and have a question about these quantum boards.. so my question is 2 of these boards with work with the HLG 240H C1050A and each board will be about 110 watts or more? im just want to get this right.. maybe a parts list as I don't know as what all I will need to buy for this light.
 

Stephenj37826

Well-Known Member
Hey guys I'm new here and have a question about these quantum boards.. so my question is 2 of these boards with work with the HLG 240H C1050A and each board will be about 110 watts or more? im just want to get this right.. maybe a parts list as I don't know as what all I will need to buy for this light.

Each board will be 135+ watts each on that driver turned full bore.

If you buy the kit you won't need anything else.
 

ChefKimbo

Well-Known Member
Well it blows that I can't upload any pics. The spread of light in my grow is mind-boggling.

I don't have a meter to get exact measurements, but i'm running 2 boards at mid-dial on the HLG 185H C1400A. I'm not sure what the wattage is but after 12 hours and a 5v volt desk fan moving air from 4 ft below, the panel were almost cool to the touch. Insane for that amount of light!

Lol so best thing about that Mars 600? I got 4 drivers(55v-86v/650ma) and 100mm fans to use!!!

Hooked up a Citi 1212 5000k to a driver, damn thing lite up every corner of my shed. Will a single Citi 1212 work for a 1.5x1.5x2 veg area?
 

shadow_moose

Well-Known Member
Well it blows that I can't upload any pics. The spread of light in my grow is mind-boggling.

I don't have a meter to get exact measurements, but i'm running 2 boards at mid-dial on the HLG 185H C1400A. I'm not sure what the wattage is but after 12 hours and a 5v volt desk fan moving air from 4 ft below, the panel were almost cool to the touch. Insane for that amount of light!

Lol so best thing about that Mars 600? I got 4 drivers(55v-86v/650ma) and 100mm fans to use!!!

Hooked up a Citi 1212 5000k to a driver, damn thing lite up every corner of my shed. Will a single Citi 1212 work for a 1.5x1.5x2 veg area?
280 watts of drivers in that thing, not bad. Thinking I might convert my dusty mars 600 to a mid power veg light but I haven't decided on what kind of stripping/boards I might be using.
 

ChaosHunter

Well-Known Member
Well it blows that I can't upload any pics. The spread of light in my grow is mind-boggling.

I don't have a meter to get exact measurements, but i'm running 2 boards at mid-dial on the HLG 185H C1400A. I'm not sure what the wattage is but after 12 hours and a 5v volt desk fan moving air from 4 ft below, the panel were almost cool to the touch. Insane for that amount of light!

Lol so best thing about that Mars 600? I got 4 drivers(55v-86v/650ma) and 100mm fans to use!!!

Hooked up a Citi 1212 5000k to a driver, damn thing lite up every corner of my shed. Will a single Citi 1212 work for a 1.5x1.5x2 veg area?
Yea us QB owners had that "Holy shit" moment when we realized the amount of light and spread.
 

pop22

Well-Known Member
grrrrrrrrrrrrrrrrrr damn still no pics........

I've got an 1812 single cob running at 55 watts in a 20"x20"x48" cabinet and I'm more than pleased with its performance! I may see what I can grow in that little cab!




Well it blows that I can't upload any pics. The spread of light in my grow is mind-boggling.

I don't have a meter to get exact measurements, but i'm running 2 boards at mid-dial on the HLG 185H C1400A. I'm not sure what the wattage is but after 12 hours and a 5v volt desk fan moving air from 4 ft below, the panel were almost cool to the touch. Insane for that amount of light!

Lol so best thing about that Mars 600? I got 4 drivers(55v-86v/650ma) and 100mm fans to use!!!

Hooked up a Citi 1212 5000k to a driver, damn thing lite up every corner of my shed. Will a single Citi 1212 work for a 1.5x1.5x2 veg area?
 

robincnn

Well-Known Member
Made some updates to website.
All 3 spectrum measurements with lighting passport sensor.
https://northerngrowlights.com/products/quantum-boards

There is no 250W kit.
Slate 2 double driver combo now costs $10 extra and will include power cord, hanger and 3 wagos
You will need to buy your screws to install driver. You may need extra wagos depending on how you wire DC
https://postimg.cc/image/589k4n37r/
https://postimg.cc/image/pgwxqd2iv/

https://northerngrowlights.com/collections/all/products/slate-2d-2x-qb304-board-heatsink?variant=30287106696
 

robincnn

Well-Known Member
You go bro. I am seriously missing your pics. Sucks. :wink:
You might be able to upload to gallery here
https://goo.gl/photos/9b5Fp3qwUHxEJZeNA


@robincnn If I hit your site on the 15th will these be sold out? Are you taking reserve/pre-orders?
I will go pickup heatsinks tomorrow noon. Kits will be listed once i check the shipment. There is enough and i don't think they will sell out in a day.
Dont want to take pre orders until i receive heatsinks.
 
Top