what size heatsinks? 55W is pretty low
thats basically a 9950 if you take the fan off
55W is fine that would be less than 30W of heat dissipation so a 40C temp rise
View attachment 3920069
dont connect the DC sides of the drivers like that. 3 cobs per driverDoes my wiring diagram here look okay?
This look better?dont connect the DC sides of the drivers like that. 3 cobs per driver
I was wondering about that when I saw it in your thread! I think it would implode my tent... LOL It is an awesome concept though!this is a heavy sumbitch!
That looks much better.yes you can leave ports open on the wago connection i use 5 port wagos for 3 wires all the time because i have a big box of them.i always put some electrical tape over it once im done wiringThis look better?
I'll get some 4 port Ideal Push Connectors from Home Depot to hook up the COBs.
Can I also use a 4 port connector with only 2 wires?
Awesome! Do you know of any free online circuit creators you're aware of? When I finish this up I want to create a more formal diagram to show noobs.That looks much better.yes you can leave ports open on the wago connection i use 5 port wagos for 3 wires all the time because i have a big box of them.i always put some electrical tape over it once im done wiring
I did this from memory at work. I'll look at the pot when I get home.i cant figure out whats going on with your pot wiring. the driver dim leads should be ganged together and then wired across the resistance of the pot
i can run my hlg185 48a at ~250w at the wall when turned all the way up. right now i am running 3 cxm22s at roughly 75w each but i can go higher or lower if i want/need toLooking at the meanwell hlg 185H-48A driver on cobkits - data spec says it's rated for 3.9A/187W, but the website says "Max current: 4.25A" and lists "3 1818@ 75.3W each (226W max) " as a potential combination. Is this just an error on the product description or am I reading the data spec wrong?