Led shed

[Jellypowered]

total all the wattage of everything you'd want to run if the power was out.

Lights I know you said were 3000w.
Heater=?
Fans=?

Anything else you'll be running? If heat isn't a problem or for those times the powers out you could always run a propane heater.

Just guessing you're gonna want like an 5-8kw generator. Get a honda lol they are usually very quiet.

Also remember, the closer you run them to max load the more fuel they use. So always get a little more than you'll need.

 

[Manfromthenorth]

Full house got to get rid of some

 

[Manfromthenorth]

Well moved some out this morning man they were all pretty root bound

 

[Jellypowered]

Beautiful scenery

 

[Manfromthenorth]

Beautiful scenery

Yes it is we got most of the stuff in to build the low cfm inline fan. Not sure what to run in the winter for a fan I want it to cool
Things off but I don't want a huge temperature swing in the room. Scratching my head on this one.

 

[Jellypowered]

It's possible in the winter you may be able to run as a sealed room and supplement co2. An oscillating fan to keep air movement and evenly distribute the heat from your lights might kill two birds with one stone

 

[Manfromthenorth]

Adjusted lights to 400 umole I know the one light is higher but it's the only way to keep the light evenly spread in that corner

 

[Manfromthenorth]

Wftn also made a diagnosis of ph swing last night. I noticed a bunch of stuff goin on with the older to middle leaves and we are trying to bring ph back up from 5.

 

[Manfromthenorth]

Lol was just looking at above pic dam the floor be looking dirty

 

[Organic Miner]

Lol was just looking at above pic dam the floor be looking dirty

That's why I run hydro, clean as an operating room! Lol.

 

[Manfromthenorth]

Strange looking calyxs? Or sacs? I've got more photos I can post too... ~Mrs.

 

[Evil-Mobo]

That's a dude

 

[Manfromthenorth]

Well we chopped 6 males today bummer but that means more room for other stuff . We had to transplant the two bigger girls into there final homes,10 gallon pots so I hope that gets them 10 more weeks. And we made a new cloning station and a new cup set up so we can see them root faster and get them in the bigger pots quicker.

 

[Manfromthenorth]

Custom 4" low flow I had some help.

 

[Mullumbimby]

View attachment 3969003 View attachment 3969005 View attachment 3969006 View attachment 3969007 View attachment 3969008 Custom 4" low flow I had some help.

Neat idea for a cheap lo-flow. What will you use that for?

 

[Manfromthenorth]

Neat idea for a cheap lo-flow. What will you use that for?

I'm going to use it to slowly exchange the air over the coarse of an hr. Specs say 30 cf min but I figured 20 since it's pulling threw a hepa, charcoal filter and some piping.

 

[coreywebster]

I'm going to use it to slowly exchange the air over the coarse of an hr. Specs say 30 cf min but I figured 20 since it's pulling threw a hepa, charcoal filter and some piping.

I don't think that will have the power to pull through any resistance. Light up a joint and test it to see if it draws the smoke though.

Loving the cloning station.

 

[Manfromthenorth]

I don't think that will have the power to pull through any resistance. Light up a joint and test it to see if it draws the smoke though.

Loving the cloning station.

I will I'm sure it will flow these things have a purdy good static pressure and I'll make sure to test for draw

 

[Manfromthenorth]

Ok update time, we have been having some issues with a few plants showing weard growth @Jellypowered we figured out what the problem was the two fixtures on these plants have been on 24 /7 for a while. I must have flipped the switch at some point and I never reset it. We found this out today while I was working on the room. At 203 I here click and I'm like wtf so I re set it to turn off at correct time so at 230 I see one go off than two and three, four and five are still on. I wait five mins and lights still on so I turn the light timer around two complete times before I figured out the switch had been set to stay on. Insert list of known swear wards here. Ok now on to more positive things. Here I have constructed the framing peaces there 2x4 I ripped 6 peaces 1.5x1.5 and 6 peaces 1.5x3. Screwed the 1.5x1.5 to the 1.5x3 forming a L shape. Pree drilling is a must here for anchoring I am using 5 5/8" screws for the ceiling and floor peaces. New ac after compleating the outer frame I ripped a 2x8 down to 6" wide,this will be the the post that will eventually close off the veg room. I placed this peace so that the veg aria would be 4'6" wide. The tent fabric is five foot wide so it will cover it with one peace. The second one is placed at 4'6 on center as well as the one for the veg room side. This makes for a wide pannel that can be removed for moving larger things in or out. And that leaves a hole that's about 32" wide every day access. Flower room width is 59" x12 foot. I used a kreg jig to do the joining. Ventilation so far and now a question regarding a def that is showing what do you think this is? I think it's start of ndef .02.

 

[Manfromthenorth]

These pictures are of my blueberry headband the leaves are looking wonky any thoughts?