Leak proof totes as cloner

[Airwalker16]

Black 5 gal buckets with lid, man. Cut your holes only 1” sized, and make your own collars out of a foam kneeling board.just drill out a small 1/8” hole in the center of each collar, then cut from the outside edge, in to that hole.

 

[JSB99]

Black 5 gal buckets with lid, man. Cut your holes only 1” sized, and make your own collars out of a foam kneeling board.just drill out a small 1/8” hole in the center of each collar, then cut from the outside edge, in to that hole.

The neoprene inserts, which are super cheap, work great (and float).

 

[Cold$moke]

I'm such a dork! I misread the original message as trying to fix light leaks, not water leaks! Can't believe no one asked me what the Hell I was talking about

Ha ha well i thought you where gona go some where with that lol

That why i said i still needed to paint lmao

 

[Cold$moke]

Black 5 gal buckets with lid, man. Cut your holes only 1” sized, and make your own collars out of a foam kneeling board.just drill out a small 1/8” hole in the center of each collar, then cut from the outside edge, in to that hole.

Not saying you are wrong cause it works.

But its much more convenient and it seals GREAT. When you make a proper sized hole for 2 inch net cups with the net part cut off
And the neoprene inserts are too nice not to buy.

This from a guy who bought kids floor mats and drilled them with a hole saw between peices of ply

Sure it works but not nice.

 

[JSB99]

Ha ha well i thought you where gona go some where with that lol

That why i said i still needed to paint lmao

That must be really good paint, to seal the lid on the opposite side LOL!

 

[JSB99]

Not saying you are wrong cause it works.

But its much more convenient and it seals GREAT. When you make a proper sized hole for 2 inch net cups with the net part cut off
And the neoprene inserts are too nice not to buy.

This from a guy who bought kids floor mats and drilled them with a hole saw between peices of ply

Sure it works but not nice.

I agree. It takes very little effort to go that extra step, and make it even that much better.

 

[goinghigh]

Lowes has the totes with black lids! No painting or covering the old yellow ones.

 

[JSB99]

Lowes has the totes with black lids! No painting or covering the old yellow ones.

Are they the strong HDX totes?

 

[Sureshot2]

I found 1/8" dowels at Walmart. 26 cents for 2ft piece. Not bad.

They didn't have any skewers. Not grill season

In the future you could use shishkabob skewers. You can buy bags of like 100+ for a buck or so. If you need them taller overlap them an inch or two and use two zip ties. This is how I stake my tomato seedlings.

 

[Cold$moke]

I buy my totes from lowes as well but i havent seen the black lids
They are probably working through the yellows
We get everything last up here

I actually prefer the lowes totes because the lid has a different top pattern.

But otherwise i think they arw probably made by the same manufacturer

 

[goinghigh]

Are they the strong HDX totes?

Yes, and they have a 40 gallon too

 

[JSB99]

Yes, and they have a 40 gallon too

Sweet! I guess they caught on to the majority of their market LOL!

 

[Cold$moke]

Sweet! I guess they caught on to the majority of their market LOL!

I told you they are a weed growers store


Livin
On
Weed
Everyday
Son! (In an ice cube voice)

 

[JSB99]

I told you they are a weed growers store


Livin
On
Weed
Everyday
Son! (In an ice cube voice)

LMAO!

 

[Airwalker16]

Not saying you are wrong cause it works.

But its much more convenient and it seals GREAT. When you make a proper sized hole for 2 inch net cups with the net part cut off
And the neoprene inserts are too nice not to buy.

This from a guy who bought kids floor mats and drilled them with a hole saw between peices of ply

Sure it works but not nice.

I can take 32 clones with the size of a bucket.

 

[Cold$moke]

I can take 32 clones with the size of a bucket.

Ive had a 100 at a time whats your point?

 

[Mont@n@]

Not saying you are wrong cause it works.

But its much more convenient and it seals GREAT. When you make a proper sized hole for 2 inch net cups with the net part cut off
And the neoprene inserts are too nice not to buy.

This from a guy who bought kids floor mats and drilled them with a hole saw between peices of ply

Sure it works but not nice.

Hi I bought some homemade 2” neoprene collar like 6 years ago and I been trying to make my own.

did you drill them with the drill in reverse?

I tried it the other date and it came out nice. To make neoprene inserts for a 2” net pot you need a 2 1/8” hole saw with a small pilot bit. The ones that I have, the where made by 2” hole saw except the one on the right side was made by a 2 1/8” hole saw.
The 2” collars sinks on the net pot while the 2 1/8” sits flush with the net pot rim. just check my clones pic with blue collar for reference.

On the other note my cloner is leakproof. I use Rubbermaid Brute totes. they are very sturdy, food grade and most important they dont leak. they cost me $25. Here is the part number:
20 Gal Brute FG9S3100GRAY

Happy growing

 

[Mont@n@]

Here is more proof in reverse drilling Neoprene inserts but the pilot bit is to thick.
Green and yellow normal drilling
Red in reverse drilling