Growmol light question

Dankestsmell

Dankestsmell

Well-Known Member
Hello, I have a couple questions. I just bought a growmol gm300, I'm in the vegitation stage, the plants are a couple weeks old. There is a dimmer in the light that goes from 0 - 100 % It says 100% is okay for vegitation but I turned it down. Was reading people saying you gotta get the plants used to the light, I had turned it down to about 30 and slowly work it up too 100. Thanks
 
Well I built a tent out of pvc, 31" wide 2 feet deep, about 4 feet tall. I'm very new St growing just a new hobby
 
If you cant return it open it up and check out what type of driver it has. You may be able to use the guts with a qb.
 
1212ham said:
Lot's of reading. ;) I'm no expert, but 30-40 watts per square foot of efficient led is common. An HLG Quantum Board is good for many beginners. https://horticulturelightinggroup.com/collections/kits

The people here can give great recommendations, but need some info.
Growing experience?
Size of grow area?
Budget?
Interested in DIY? You can build a top notch light at lower cost.
Click to expand...
Are there any other led options besides Quantum Boards that would work?
 
I'm going to guess your light has one or more drivers inside of it powering the lights. Along with a few fans and power supplies to power them. In most cases you can match the drivers to cobs or quantum boards. I took one apart that had 4 130v 630mA drivers which would make for a few options. The HLG Quantum boards that have 288 of the Samsung diodes are pretty common but hard to get but that board can consume between 47.7 - 54.54v . If your led has a similar driver then you could snag two of them and they would work. If your unfamiliar with electrical then i would suggest you get a better understanding before wiring up a light. Its not too difficult to learn. Perhaps check out growmau5 on YouTube.
 
A QB260-kit would be awesome for your space. These kits are complete, no need to destroy the other light for drivers!
Sell it on e3ay and get a few F-strips if you want some side light or use it to veg plants in another tent. Later you can convert it into a white COB light by interchanging only the LED's.
There are a good few vids about that on youtube:

 
I guess I should have done more research, without knowing what I'm really jumping into. I just want a light that's gonna give me 100%. With the first response it kinda bummed me out
 
【HIGH YIELD FLOWERING LED GROW LIGHT】Chinese professional manufacturer of 10 years’ experience on LED grow lights. We only make high quality LED grow lights with right spectrums to make sure great grow results. Our LED grow lights is 20%-30% higher yield than many kinds LED grow lights on the market.

This is what the first thing i read says... i would return it and invest in a custom setup. Do you have anything sprouting or growing currently?
 
You must log in or register to reply here.

Similar threads

D
Recommended light intensity for autoflowers fluence spydr 2i 630w led
Replies
16
Views
1K
Rocket Soul
Rocket Soul
HandyGringo
What kind of dimmer to get?
Replies
13
Views
965
Rennpappe
Rennpappe
M
Light stress and LED dimmable lights?
Replies
3
Views
330
Jimski
Jimski
S
Nutrient burn or light stess? Last days of harvest
Replies
5
Views
412
senorthc
senorthc
G
GSC Autoflower in 5.5 weeks ... What should my light be set to?
Replies
3
Views
291
Delps8
D
Back
Top