Have you grown before? If not walk before you run. As for the room seems like mine minus I put my plugs at the four ft mark rather than the ceiling. The insulation is good for the obvious reasons but it dampens sound as well. The other difference is mine uses a 2nd zone off my geothermal set to auto. Ventilation I use big Dayton blowers I believe they were I don’t use co2. And the leds are they built or some knockoff. If they aren’t good leds wait and get better or build or simply go cmh or hps.
Thanks for the reply... Yes, I have grown, but not indoors. My state is legal now, and I want to give it a run or two through fall, winter. I have little experience with this many LED's .. pretty sure im going with HydroGrow Penetrator 336X's. Im thinking that with almost 36000 btu's being generated, I'll need a 4 ton unit ? What do you think I will need to turn over that much air (5400 cubic ft) to keep the RH in check? Thanks again for the reply.
Yah I would not go with those lights look to timber or hlg if you want to do leds 4 ton should be good
Timber seems to have a good rep...I'll look into it. There seems to be a million LED options and just as many opinions. Mind boggling. The sun is so much more simple
Dehumidifier is def on the list!
Of the Timbers, which model would you recommend? That Fatty VS looks like a beast!
are you open to DIY? I feel like with a build of that size the dollars you could save by building your own light would be pretty substantial.
You have a good foot print so go with what gives you the best spread.
I dont know.. Im not an electrician, and have never looked into DYI on LED's
It is hard for a new guy at first. Some very good LED out there and lots of junk. Timber and HLG are very good. I'll try to post some of the others tonight. If you can use a hacksaw and drill, you can probably build an excellent light.
That would be great! Thanks so much.
