Have posted this elsewhere, but this seems to be a good spot for this.
LESS IS MORE
200 ppm of a + b for veg. is plenty.
350 ppm of a + b for flower is plenty.
CaliMagic/Canna A&B ratio
150 ppm/200 ppm = 350
100 ppm/300 ppm = 400
50 ppm/ 400 ppm= 450
Here is a chart the gives the ratios of Calcium in given ppm of A&B.
This Calcium information is purely based on a Canna schedule, using CaliMagic. Once you hit around 700 ppm, Canna base nutes, you no longer need Cal/mag additives.
This is based on slightly rough math but is very close to correct, in my experience.
A&B
3 ml/gal = .4 EC = 200 ppm with around 44 ppm of calcium
4.5 ml/gal = .6 EC = 300 ppm with around 66 ppm of calcium
6.2 ml/gal = .8 EC = 400 ppm with around 88 ppm of calcium
7.7 ml/gal = 1 EC = 500 ppm with around 112 ppm of calcium
9.2 ml/gal = 1.2 EC = 600 ppm with around 135 ppm of calcium.
I use GH Cal/Magic and I believe the recommended rate is 3.5 ml (1 tsp/5 ml)/gallon. I use Canna Coco's line of nutrients but I back off of their recommended rates, as I feel they are way high. For example, in veg I will add only 200 ppm of A&B and in flower 350 ppm. Now these rates do not give me the Cal ratio needed. You need around 150 ppm of calcium alone.....so even if when I'm at 200 ppm if I only added 100 ppm of Calimagic, only 75 is calcium so I would still be a tad short. In flower, I use RO (55 ppm of Cal/Mag), to this I add 0.75 ml Cal/Magic (68 ppm) and 0.5 grams Epsom (63 ppm) per gallon to bring my #'s to 131 ppm, below the 150 ppm needed, That's without the 55 ppm of the RO, then begin adding the base nutrients. But I have been working with this and it seems ok. I believe it has to do with the 55 ppm of Cal/Mag that is added back to my RO water.
pH of 5.8 and let it drift to 6.0 to 6.1. Drip Clean for the win, helps clean the root system of excess nutes and keeps you nozzles clean.
Hope this makes sense!