Pictures of your DIY lights - Post your pics!!!
- Thread starter TimeToBurn
- Start date
mastrmasn
Well-Known Member
I need to know how you get 500+ Watts on what looks to be 4 strips.
diyled
Well-Known Member
Airwalker16
Well-Known Member
Wait what.. this only4 strips.. so you could add another and use an hlg600?
Damn I didn't know you could so adequately cover a 4X4 with such minimal components, my dude.
What strips are those?
Airwalker16
Well-Known Member
So wait it's 530watts total shared between the two fixtures?
do you even read a thread before you post your redundant questions? it was already answered in the post above your post...
Airwalker16
Well-Known Member
Ya no shit. Quit fucking ALWAYS trying to call me out on every mistake. God I'm just ignoring you. Never once, have you and I had anything constructive or beneficial spoken about between us.
See how I QUOTED the post where he says they're HInFlux? See that part? Fuckin horse shit.
Last edited:
Moflow
Well-Known Member
The wiring..... perhaps....?
Airwalker16
Well-Known Member
Mainly because you say 530w and include only pics of the 4' fixture.
Airwalker16
Well-Known Member
Between the 2 fixtures or all 530W goes to the one 4X4' strip build?it's an A driver einstein, turned up to the max, providing around 500w + driver inefficiency of 94,5% = 530w on the wall
grotbags
Well-Known Member
i thought the l09 strips were 49w max at 1600mah, at 1340mah wont they be around 47w. so 8 x 47w = 376w.
where is the extra wattage? 530w - 376w = 154w. can someone enlighten me.
or is it just a marketing thing, bigger number looks better? and you are just quoting what the driver can push not what the strips are actually consuming.
where is the extra wattage? 530w - 376w = 154w. can someone enlighten me.
or is it just a marketing thing, bigger number looks better? and you are just quoting what the driver can push not what the strips are actually consuming.
diyled
Well-Known Member
lol i thought you were an expert @Airwalker16
Each strip runs at 45.5v 1.34a - 1.37a ( all meanwells are not the same)
.
2 strips per heatsink wired in parallel end to end, then the 4 strings connected in parallel to the driver. Its 118cm x 90cm in size.
Its 527w on startup.
Each strip runs at 45.5v 1.34a - 1.37a ( all meanwells are not the same)
.
2 strips per heatsink wired in parallel end to end, then the 4 strings connected in parallel to the driver. Its 118cm x 90cm in size.
Its 527w on startup.
Airwalker16
Well-Known Member
2 per heatsink. That's what threw me off.lol i thought you were an expert @Airwalker16
Each strip runs at 45.5v 1.34a - 1.37a ( all meanwells are not the same)
.
2 strips per heatsink wired in parallel end to end, then the 4 strings connected in parallel to the driver. Its 118cm x 90cm in size.
Its 527w on startup.
Airwalker16
Well-Known Member
What's the part#? Or a link to Digikey page?
diyled
Well-Known Member
Moflow
Well-Known Member
SL-B8T4N90LAWW 4000k , other flavours are available. ... lol
https://www.digikey.co.uk/product-detail/en/samsung-semiconductor-inc/SL-B8T4N90LAWW/1510-2453-ND/8536569
Mine came from Thief River Fall's USA
Moflow
Well-Known Member
Beat me to it .... lol