I need to know how you get 500+ Watts on what looks to be 4 strips.
Wait what.. this only4 strips.. so you could add another and use an hlg600?
So wait it's 530watts total shared between the two fixtures?
do you even read a thread before you post your redundant questions? it was already answered in the post above your post...What strips are those?
Ya no shit. Quit fucking ALWAYS trying to call me out on every mistake. God I'm just ignoring you. Never once, have you and I had anything constructive or beneficial spoken about between us.do you even read a thread before you post your redundant questions? it was already answered in the post above your post...
The wiring..... perhaps....?Im not sure whats hard to understand about 8 L09 strips at 1.34a on a hlg-480H-48a
Mainly because you say 530w and include only pics of the 4' fixture.Im not sure whats hard to understand about 8 L09 strips at 1.34a on a hlg-480H-48a
Between the 2 fixtures or all 530W goes to the one 4X4' strip build?it's an A driver einstein, turned up to the max, providing around 500w + driver inefficiency of 94,5% = 530w on the wall
2 per heatsink. That's what threw me off.lol i thought you were an expert @Airwalker16
Each strip runs at 45.5v 1.34a - 1.37a ( all meanwells are not the same)
.
2 strips per heatsink wired in parallel end to end, then the 4 strings connected in parallel to the driver. Its 118cm x 90cm in size.
Its 527w on startup.
What's the part#? Or a link to Digikey page?
https://www.digikey.co.uk/products/en?keywords=SL-B8V4N90LAWWWhat's the part#? Or a link to Digikey page?
SL-B8T4N90LAWW 4000k , other flavours are available. ... lolWhat's the part#? Or a link to Digikey page?
Beat me to it .... lol