Rocket Soul
Well-Known Member
I think the web says MOQ:100Read my post before that one.
To get the most from the board yes.
But whatever the Max current the lowest drawing LEDs can handle, you could run the whole board at.
I think the web says MOQ:100Read my post before that one.
To get the most from the board yes.
But whatever the Max current the lowest drawing LEDs can handle, you could run the whole board at.
I was just using it as an example to using a board with multiple channels with different current limitsI think the web says MOQ:100
It would surprise me if they wouldnt do samples. Have you ever contacted them? You been talking about this board for a while if i remember right.I was just using it as an example to using a board with multiple channels with different current limits
Huh?dude has been on this board for years and still asks
how high should i hang mylight
has red leds ..i ask him how he found them..no answer
airw..how about contributing?
Are these just Meiji boards? So are the middle diodes iR and that one line of green looking LEDs the UV? Is it only 400nm?I call these "Disco Boards".... lol
Here's a one channel Chinese board with uv, white, 660nm, 740nm diodes, only needs one driver.
2 x boards running at 130 wall watts.
Seems like they grow plants ok with nice par readings.
View attachment 4280336
Kings Banner in foreground, Paradise Seeds Sensi Star original at rear.
Theyre in Biobizz soil, perlite and vermiculite. Tomatorite feed.
I warm the water a bit before feeding them due to cold temps in grow area.
View attachment 4280337
Kings Banner up close.
View attachment 4280338
Looking ok for 22 - 23°c - 71f lights on temperatures
and 7 - 8°c - 46f lights off temperatures.
you have to order 30?
Looking good, how hard you run them?Second run with these FOTOPs 3500k :
View attachment 4281548
Looking much more under control.
Last time got way out of hand, lots of stretch under 3500k:
View attachment 4281547
These are Meiju boards.
Yup.Looking good, how hard you run them?
561c's, right?
Huh?
I made that thread because I was seeing so much color change at my canopy but not any lower. Wanted to see if others have this same outcome.
What do you want me to contribute @OLD MOTHER SATIVA ?
First run with them. I'm seeing a second wind of white pistilsok good question on colour
contribute?
you have reds...have they helped..no difference or what?
i don't have any
thanks
Is it 2 x r2t qb288 boards on 240h driver?Hey guys, need some help.
Looking to cover a 4.5x2 ft space. Bought two blurple lights from Aliexpress and one of them has already failed just shy of the 2 month mark.
Got in touch with in touch with R2T and Meiju. R2T has quoted $228 (shipped) for - R2T QB288 V2plus 240watt 54V combo kit with Samsung LM301B & XPE 660nm.
Have a couple of questions before I finalise the order -
Is this kit suitable for a 4.5x2 space or should I be looking at boards with a wider footprint or at least with more spacing between the two boards? Also will be using the same boards for the entire grow, so should I go for 3000 or 3500K?
Thanks
Use HLG if you're only getting 2 boards. Save the money to ship it hereHey guys, need some help.
Looking to cover a 4.5x2 ft space. Bought two blurple lights from Aliexpress and one of them has already failed just shy of the 2 month mark.
Got in touch with in touch with R2T and Meiju. R2T has quoted $228 (shipped) for - R2T QB288 V2plus 240watt 54V combo kit with Samsung LM301B & XPE 660nm.
Have a couple of questions before I finalise the order -
Is this kit suitable for a 4.5x2 space or should I be looking at boards with a wider footprint or at least with more spacing between the two boards? Also will be using the same boards for the entire grow, so should I go for 3000 or 3500K?
Thanks
It's a 590*205*20mm single fixture with 2 boards. Driver included is HLG-240H-54B + dimmer.Is it 2 x r2t qb288 boards on 240h driver?
What size is the fixture?
A single FOTOP 900mm x 300mm board from Meiju would be good for your space...... or 2 of them if you could squeeze them into your 2ft side would be the dogs ballicks! Lol
I'm not from "here".Use HLG if you're only getting 2 boards. Save the money to ship it here
Id go for 3 single boards on a hlg320 for that space for extra power and spread. The FoTop is great but a little shy on 4.5 feet. Better do it right. It also allows you to have different height cannopy which is nice.Hey guys, need some help.
Looking to cover a 4.5x2 ft space. Bought two blurple lights from Aliexpress and one of them has already failed just shy of the 2 month mark.
Got in touch with R2T and Meiju. R2T has quoted $228 (shipped) for - R2T QB288 V2plus 240watt 54V combo kit with Samsung LM301B & XPE 660nm.
Have a couple of questions before I finalise the order -
Is this kit suitable for a 4.5x2 space or should I be looking at boards with a wider footprint or at least with more spacing between the two boards? Also will be using the same boards for the entire grow, so should I go for 3000 or 3500K?
Thanks