Cutter New Web site

[welight]

@welight hey, could you give a model/product number on those cree 5630 he you mentioned on tekniks thread?

@RocketSoul. New product we are looking to build, it looks on paper to make sense but still in design
Cheers
Mark

 

[whytewidow]

Well here it is 4-20-2019 my order placed clear back on march 28th still hasnt shipped. I was told it was scheduled to be shipped yesterday. And now Mark came even confirm if my order has been shipped. The company he runs and owns. He cant even tell me if its shipped. 900 dollar order and I can get even info on my order. This is absolutely unacceptable and super annoying.

 

[whytewidow]

there may be apileo f us

frolast week

i am still waiting for email reply about discount for first time customer

the second pm reply to mark has gone silent

i have 500$ + in my check out

i could easily double that beforei buy..but i am still waiting

If you want them in any type of time frame I'd order else where.

 

[whytewidow]

Still no word on my order. Other than he thinks completed. I'm going to need over 1000 strips. But I cant wait a month before they are even shipped. It should not take a month to make 100 strips. Unless you're soldering it by hand. Absolutely ridiculous. It would take 6 months to get 1000. Using a pick n place machine and flow oven 100 strips should be done in less than a week.

 

[whytewidow]

Almost 30 days and still no shipping info....

 

[whytewidow]

Finally got my order.

 

[BHippyAZ]

We built the first 16pc kit and have it up. This kit is the 3000k 90CRI/ 3500k 80CRI kit. I only received 4 of the darker chip strips (i assume they are the 3000k as the strip are not marked). will be adding the 660mn and uva strip soon.

 

[Rocket Soul]

Hey @welight

Mark, could you tellnus a bit more on this product:

https://www.cutter.com.au/product/ssk-272/
Seems sweet

I was wondering about spectrum and board architecture:c the reds, are they just in series with the nichia whites? Seems like a waste to use the chip only to a fraction (200mA) of full power (1500ma).

Have you got the spectrum tested?

 

[grisbi]

Hey @welight

Mark, could you tellnus a bit more on this product:

https://www.cutter.com.au/product/ssk-272/
Seems sweet

I was wondering about spectrum and board architecture:c the reds, are they just in series with the nichia whites? Seems like a waste to use the chip only to a fraction (200mA) of full power (1500ma).

Have you got the spectrum tested?

loooooks ammmmmazing!!! would love to get nichia optisolis 5000k mixed with 4000k80 cri
and new creexpg3 660+ 730 on a second channel!!!
@welight hello sir, can we know the difference between nichia 757v3f1 and 757h ?

 

[welight]

Hey @welight

Mark, could you tellnus a bit more on this product:

https://www.cutter.com.au/product/ssk-272/
Seems sweet

I was wondering about spectrum and board architecture:c the reds, are they just in series with the nichia whites? Seems like a waste to use the chip only to a fraction (200mA) of full power (1500ma).

Have you got the spectrum tested?

Hi Rocket
So the 272 is a new platform. Its fundamentally ratio based monochromatic, but based around what we feel will be the best leds capable of getting the board to a base standard of >3umoles/j system level eff, using the new Nichia 757H series and the new XPG-3. The goal will be a product range of veg/flower all over 3um/j. We will also flesh out the product with Optisolis blends to get 99CRI versions, less efficacy but great spectrums, We are sacrificing tuneability for simplicity at high efficacy
Cheers
Mark

 

[welight]

loooooks ammmmmazing!!! would love to get nichia optisolis 5000k mixed with 4000k80 cri
and new creexpg3 660+ 730 on a second channel!!!
@welight hello sir, can we know the difference between nichia 757v3f1 and 757h ?

Yes H is around 1.5% improvement on V3

 

[GreeneryBob]

I've been tinkering, still lots to do.

 

[coreywebster]

Clean as a whistle Bob. Nice.

I've been tinkering, still lots to to do.

 

[welight]

I've been tinkering, still lots to to do.

Damm that looks pretty af
Cheers

 

[ApfelStrudel]

I've been tinkering, still lots to to do.

Tight

 

[Rocket Soul]

Hey @welight / Mark

I saw some lg uv chips 280nm posted onsite, any more info on those??

 

[welight]

Hey @welight / Mark

I saw some lg uv chips 280nm posted onsite, any more info on those??

Hi Rocket
The new Nichia 280nm UV-C, product is released however still waiting on datasheet from Nichia and when they will be available to order but they look sweeeeeet
Cheers
Mark

 

[PilouPilou]

Hi Rocket
So the 272 is a new platform. Its fundamentally ratio based monochromatic, but based around what we feel will be the best leds capable of getting the board to a base standard of >3umoles/j system level eff, using the new Nichia 757H series and the new XPG-3. The goal will be a product range of veg/flower all over 3um/j. We will also flesh out the product with Optisolis blends to get 99CRI versions, less efficacy but great spectrums, We are sacrificing tuneability for simplicity at high efficacy
Cheers
Mark

hi Mark!

+3umol/j wow! but what wattage?

 

[min444]

Some pages have mistakes (like the new SSK 272 has 3 different dimensions).

 

[Rocket Soul]

Hi Rocket
So the 272 is a new platform. Its fundamentally ratio based monochromatic, but based around what we feel will be the best leds capable of getting the board to a base standard of >3umoles/j system level eff, using the new Nichia 757H series and the new XPG-3. The goal will be a product range of veg/flower all over 3um/j. We will also flesh out the product with Optisolis blends to get 99CRI versions, less efficacy but great spectrums, We are sacrificing tuneability for simplicity at high efficacy
Cheers
Mark

Hey rock, no we run the monos in series, in parallel with the whites
Cheers

Im so sorry, i missunderstood your previous answer. Thats awesome! So if im running the whites at say 100mA each, what current will the xpg run at?

It would be great if you had a setup which is maximized in the sense of full current for white=full or near full current on reds. Being so efficient it seems like a waste to run xpg at 200mA.