Grrr...I need some help getting my clones to root!

[Cash_Crop]

I have not monster cropped yet, I just learned of it after joining the forum. I have seen budded cuts revert back to veg if they where just starting to bud. If they are just showing hairs, you should be good to get clones from. Might clone faster, even.

They have been flowering for a while it’s about 50/50 on top but the branches I’m talking about are very small tiny buds and some white pistols they look like they just started flowering

Hi cash_crop, yes you may take some cuttings from outdoor plants if you like, but it is much better if the plants are still in Veg and not in flowering yet, that is not to say that you can't get a flowering clone to revert back into Veg growth and grow it into a larger plant and then flower it out, but I took some cuttings from a flowering plant once earlier this year, and all they did was turn into little bushy single cone plants , like a single cola sticking out of the dirt, lol those were the ones I let my dad keep and they did ok, but I didn't put any extra light on them or anything.

so that was kind of my latest experiment on that side of things, and the buds took quite a while I'll add and never really ripened all the way, probably not the best example to mention, but if the plant is already in flower sometimes if you are too late in cutting them they will resort to flowering out and staying small and stunted for an extended period of time if they do eventually take off, might take more than a month to get them to snap back into veg if they haven't stunted, but I have read about someone on this forum collecting a cutting from a bud, an actual clone cutting with buds left on it and the member was able to revert the bud back into a growing plant and the reveged the plant and made more cuttings from it afterwards, lol, so you have options if it seems like there is no hope, with skill sometimes you can make it happen.

haha @ skill I’m just crossing my fingers each time but I just came inside with 4 more cuts off 4 other flowering plants I just looked for the most shadiest area where the smallest branch would be with only a small little cluster of bud on it, I cut them in the dark and just put them on tap water I was a little lazy to check the ph I worked late and have to work early tomorrow ona Saturday , but usually ithe tap water sits between 6.-7. Someone mention 5.5 and 200 pm. I want to perfect this eventually I will have to invest in some proper tools, Life is so expensive here to live these days, High cost rent, insurance, marijuana dry flower/ for quad grade your paying 14/15 a gram in dispenceries, this isn’t 5 star bud either only quad I’ve seen it up to 16$ I belive it was a exotic strain best bud is so expensive most smokers don’t care asking for a deal because there needs to be the distinction between different quality of flower on the market 8 bucks for average quick cured china bud, I guess the more time you spend curing the better the quality of your girls will be at the end when you get to smoke your shit with the guy who escaped with a plan

 

[mustbetribbin]

@ Grim - Thanks for your additional information it makes sense to prep the cutting before actually cutting the cutting off the mother, less shock, I can’t wait to try this. Also I have 3 cuttings off my lemon haze from the bottom small branches that have immature buds on them, I kept the leaves and little buds on in a cup of water with about an inch or 2 of water in it on my window ledge it has been there for a week and they are healthy looking I noticed the bottom stem where I cut looks like a white ball on the end and I don’t see anything emerging from the sides of the stem. Do you think that the white is a sign of roots to come?

Hey Cash_Crop, sorry I missed this message earlier, I was going to mention, if you do decide to try and clone in a glass of water, what will speed up the plant in putting out roots is to aerate the water at least once a day, this also will help keep the water sterile if you change it once per day, all you really need is a gallon bottle of water with a screw on lid, fill it up about 1/2 way or less 1/4 and then just shake the bottle up vigorously for a couple mins or whatever, don't make it so full that you hurt yourself ha ha, but this is just an quick simple solution if you don't have a aquarium aerator and airstone, this is just for taking small amounts at maybe 2 cuttings at a time to where you don't really need to run a cloner or use a large amount of energy to make it work.

If you do decide to try cloning in a window you will need to add extra light to the day to keep the Veg cycle going, and it's better if the roots are shielded from the light maybe in a tinted or darker container, roots can get skittish around too much light, hence why nobody really grows anything in clear containers otherwise, etc. But back to the window thing, that's kindf why people get lights and a room setup, because you've already got to have lights even if you are supplementing with sunlight to keep the Veg cycle going, if the veg cycle is halted then that line of clones is then jeopardized from being tempted to turn on and start making mature hormones and growth, this is a danger for perpetual grows and so forth, people that depend of a flip of a certain genetic and so on because it can lead to several various complications, possibly hermie traits develop eventually from a cloning line, bad news, so the light cycle is very important 18/6 to17-7 is the light cycles I've used so far on my clones/seedlings both work well.

When I water anything of mine be it seedlings, clones or fully mature plants I make sure the water is aerated some before usage, and I would recommend a water aeration tank for other soil growers that would like to add more life to their plants when they get watered, because non aerated stale water is not as life giving, it only sustains the plants it does not have the oxygen needed for expansive growth, larger leaves, denser buds, etc.

So yeah if you only have a few plants a few jugs of water might be all that you'd need to get by on, but it you want to get serious about watering, I'd setup a more semi permanent setup for complete saturation within the water, and more attached oxygen to the water molecules, which enhances growth, similar to the way rainfall works, rain is highly aerated as it falls from clouds into thin air, nature knows best, oxygen bonded water molecules offer the best hydration.

But anyways man, glad to be able to offer some assistance to you and get you loaded up with some tips and tricks before your next cloning attempt, and I do hope that you will have much success in your future grows, I was certainly glad to help out and was pleased to see your enthusiasm and appreciation towards everyone and our responses, you've been very kind and receptive, glad to have been able to help you friend, take care til next time, or til another response pops up, ha ha, I'm always around so all good, next time can be 10mins from now, lmao, but no man we are glad you can here for help, just look at the responses, you've got it in the bag now.

 

[raggyb]

My bucket closer was a 5 gallon bucket with a lid with holes in it for the clones , air pump with air stones lots of bubbles stems hanging only half inch in the top surface also with a dome over the top of the bucket, it keeps a good humidity inside and out but they always end up rotting or wilting away mainly turning brown and hollowing the stems, I’m not sure if it is the right way as some of the buckets I have seen are aeroponics sort of with misting cycles instead of bubble I just thought it would work the same wouldn’t you think?

The 2 methods are definitely different. I think you will may more luck with the rockwool if you can dial it in with the dome. With bubbler I got roots but failed after. Here's what I did.
I didn't want to spend any on misters and pumps but I had airstones to bubble but read about a lot of failures with that. I stumbled one idea to add ultrasound puck fogger to the bubbles and I have those. So I modified a styrofoam board to float the puck to add fog in addition to bubbles. I drilled the top to insert those cloner sleve things to hold the clone. In one sleve I put a cheap thermometer. Put the whole cloner on a heat mat with temp controller I already had. No dome was necc here. Air temp underneath was constant 78F. Added weak superthrive to tap. Kept lower in grow room about 4' from a MH. After cut I dipped in clone powder and gel which maybe washed off in fog. I also dipped plant upside down in anti wilt which helped me in the other method. I thought this method with having the tops above with no dome would help make them hardier but it wasn't enough.
What I think could have still gone wrong is bacteria for one as mentioned. I didn't add hydroguard. Another option I think is changing water daily which would have been spill city so I didn't. I think tap is ok here as it's one time chlorine helps. I got roots but stems seemed a little flimsy and maybe were rotted which led to failing on planting. I think getting the soil moisture and light combination just right is key too. Want to try these ideas of hydroguard and at some point in the process moving to a different light.

 

[raggyb]

@ Grim - Thanks for your additional information it makes sense to prep the cutting before actually cutting the cutting off the mother, less shock, I can’t wait to try this. Also I have 3 cuttings off my lemon haze from the bottom small branches that have immature buds on them, I kept the leaves and little buds on in a cup of water with about an inch or 2 of water in it on my window ledge it has been there for a week and they are healthy looking I noticed the bottom stem where I cut looks like a white ball on the end and I don’t see anything emerging from the sides of the stem. Do you think that the white is a sign of roots to come?

It sounds like a root. But imho you're not out of the woods yet.

 

[Cash_Crop]

I am blessed, thank you!! Everyone in here has been very helpful and. No matter what your doing someone has already done it, All you can do is do it better. Let me ask you if you feel this way or ever have, I have only grown a few plants at a time 4-6..and I feeL it is not enough for the amount of work put in, my girl and I smoke a lot just to maintain ..both of our lives have been messed up and we have been through too much shit...Na na anyways,I have space to grow indoor plus I have 160 acres of land in the middle of nowhere I want to get on it early next year, this year I only did about 30 outdoors, not worth the time and effort for the amount of time it is going to take to cure properly and my the end of the crop when it’s dry it shrinks to half the size and weight.. the thing is I have a 2 parted garage and a empty basement I could set up, my issue is like most other people cash money, it would be nice to have some friends with some extra equipment, I’m just scavgenig things like fluorescents I got all 6500k running 4 fluorescent with a 1000 watt led over a stressed plant right now it’s trying to look better, this is a white gold strain, I’m getting some Mike Tyson clones from a dispensary connection. Hopefully it a fire strain..anyways do you think that it’s too much light for a sick plant?

Hey Cash_Crop, sorry I missed this message earlier, I was going to mention, if you do decide to try and clone in a glass of water, what will speed up the plant in putting out roots is to aerate the water at least once a day, this also will help keep the water sterile if you change it once per day, all you really need is a gallon bottle of water with a screw on lid, fill it up about 1/2 way or less 1/4 and then just shake the bottle up vigorously for a couple mins or whatever, don't make it so full that you hurt yourself ha ha, but this is just an quick simple solution if you don't have a aquarium aerator and airstone, this is just for taking small amounts at maybe 2 cuttings at a time to where you don't really need to run a cloner or use a large amount of energy to make it work.

If you do decide to try cloning in a window you will need to add extra light to the day to keep the Veg cycle going, and it's better if the roots are shielded from the light maybe in a tinted or darker container, roots can get skittish around too much light, hence why nobody really grows anything in clear containers otherwise, etc. But back to the window thing, that's kindf why people get lights and a room setup, because you've already got to have lights even if you are supplementing with sunlight to keep the Veg cycle going, if the veg cycle is halted then that line of clones is then jeopardized from being tempted to turn on and start making mature hormones and growth, this is a danger for perpetual grows and so forth, people that depend of a flip of a certain genetic and so on because it can lead to several various complications, possibly hermie traits develop eventually from a cloning line, bad news, so the light cycle is very important 18/6 to17-7 is the light cycles I've used so far on my clones/seedlings both work well.

When I water anything of mine be it seedlings, clones or fully mature plants I make sure the water is aerated some before usage, and I would recommend a water aeration tank for other soil growers that would like to add more life to their plants when they get watered, because non aerated stale water is not as life giving, it only sustains the plants it does not have the oxygen needed for expansive growth, larger leaves, denser buds, etc.

So yeah if you only have a few plants a few jugs of water might be all that you'd need to get by on, but it you want to get serious about watering, I'd setup a more semi permanent setup for complete saturation within the water, and more attached oxygen to the water molecules, which enhances growth, similar to the way rainfall works, rain is highly aerated as it falls from clouds into thin air, nature knows best, oxygen bonded water molecules offer the best hydration.

But anyways man, glad to be able to offer some assistance to you and get you loaded up with some tips and tricks before your next cloning attempt, and I do hope that you will have much success in your future grows, I was certainly glad to help out and was pleased to see your enthusiasm and appreciation towards everyone and our responses, you've been very kind and receptive, glad to have been able to help you friend, take care til next time, or til another response pops up, ha ha, I'm always around so all good, next time can be 10mins from now, lmao, but no man we are glad you can here for help, just look at the responses, you've got it in the bag now.

It sounds like a root. But imho you're not out of the woods yet.

 

[Cherrybomb2513]

I feel your pain the way I've had success is preparing my mom's first kelp foliar spray two to three weeks before cuttings then take your cutting 24 hours after your last foliar feed 6 inch minimum I cut them a little longer and then soak them for 15 hours in superthrive and pH RO water at 5.8 once the clones have soaked then prepare them to be put into rockwool I scraped where I'm going to cut and then I cut and immediately dip into clonex that way there's no chance of air embolism I then dip my clonex clone into great white powder then I shove it into the rockwool and I take a small piece of rock wool off of the corner and pack it into the hole to take away the airspace around the base of the Clone in the rock wool. I prepare my rockwool with r o p h to 5.0 soaked for 24 hours then I mix up base nutes with a little bit of kelp ppm to 300 leave in the solution for an hour then shake out leaving the cube wet but not drenched. If it's winter time I'll put water in the bottom of the Clone tray and put it on a heat pad with a timer 15 min on 15 min off 80° f is key in the summer I just leave it in my room at a constant 80 degrees I don't water or Mist the plants at all for 3 to 4 days I just missed the Dome once to twice a day keep it constantly beaded after 4 days i get a dropper and add a few drops of base Base nutes at 300 PPM first sign of roots I back off on misting the Dome and begin to harden off either cracking the Dome or removing it completely and just exposing them slowly. As far as lighting I've had really good success with fluorescence and LEDs with lots of distance in between they don't need much light.I think that everybody has shared a lot of really good information with you and what I have done is take a little bit from everybody and kind of made my own style based on my needs. I also found that when I was in manicuring and cleaning I would take cuttings and practice even though I didn't need them and that enabled me to dial in my system then when it came time I was prepared I hope you're able to take something from this good luck to you,
Cherrybomb2513

 

[xtsho]

I feel your pain the way I've had success is preparing my mom's first kelp foliar spray two to three weeks before cuttings then take your cutting 24 hours after your last foliar feed 6 inch minimum I cut them a little longer and then soak them for 15 hours in superthrive and pH RO water at 5.8 once the clones have soaked then prepare them to be put into rockwool I scraped where I'm going to cut and then I cut and immediately dip into clonex that way there's no chance of air embolism I then dip my clonex clone into great white powder then I shove it into the rockwool and I take a small piece of rock wool off of the corner and pack it into the hole to take away the airspace around the base of the Clone in the rock wool. I prepare my rockwool with r o p h to 5.0 soaked for 24 hours then I mix up base nutes with a little bit of kelp ppm to 300 leave in the solution for an hour then shake out leaving the cube wet but not drenched. If it's winter time I'll put water in the bottom of the Clone tray and put it on a heat pad with a timer 15 min on 15 min off 80° f is key in the summer I just leave it in my room at a constant 80 degrees I don't water or Mist the plants at all for 3 to 4 days I just missed the Dome once to twice a day keep it constantly beaded after 4 days i get a dropper and add a few drops of base Base nutes at 300 PPM first sign of roots I back off on misting the Dome and begin to harden off either cracking the Dome or removing it completely and just exposing them slowly. As far as lighting I've had really good success with fluorescence and LEDs with lots of distance in between they don't need much light.I think that everybody has shared a lot of really good information with you and what I have done is take a little bit from everybody and kind of made my own style based on my needs. I also found that when I was in manicuring and cleaning I would take cuttings and practice even though I didn't need them and that enabled me to dial in my system then when it came time I was prepared I hope you're able to take something from this good luck to you,
Cherrybomb2513

Are you serious? You do all that? Just to clone?

I don't understand why people make cloning so complicated. Cut clone, dip in rooting compound, "I have just started using honey and am sold", put in coco or soil. Keep out of direct light and have roots in under a week.

 

[Cherrybomb2513]

Are you serious? You do all that? Just to clone?

I don't understand why people make cloning so complicated. Cut clone, dip in rooting compound, "I have just started using honey and am sold", put in coco or soil. Keep out of direct light and have roots in under a week.

Are you serious? You do all that? Just to clone?

I don't understand why people make cloning so complicated. Cut clone, dip in rooting compound, "I have just started using honey and am sold", put in coco or soil. Keep out of direct light and have roots in under a

Are you serious? You do all that? Just to clone?

I don't understand why people make cloning so complicated. Cut clone, dip in rooting compound, "I have just started using honey and am sold", put in coco or soil. Keep out of direct light and have roots in under a week.

Yes I'm very serious that's my technique. I am stoked for you that you have that kind of luck forward slash skill that you can be successful as a minimalist. I have tried the same techniques and have been mildly successful my OCD runs deep I expect 100% on every attempt. The way that I have figured out how to be successful 100% of the time was to pull ideas from many different people to create my technique. I have read about honey. It sounds very interesting. I will definitely try it

 

[Cherrybomb2513]

Yes I'm very serious that's my technique. I am stoked for you that you have that kind of luck forward slash skill that you can be successful as a minimalist. I have tried the same techniques and have been mildly successful my OCD runs deep I expect 100% on every attempt. The way that I have figured out how to be successful 100% of the time was to pull ideas from many different people to create my technique. I have read about honey. It sounds very interesting. I will definitely try it

I have also heard of cinnamon and honey combined wondering if you have tried or have any experience with it what's your take?
Thanks Cherrybomb2513

 

[Shizrock]

I have never reached out to anyone for help before, mainly because of the fact I can research and find most answers myself, and also that I am fully capable to do things better than most except when it comes to cloning, I will admit defeat only because I have taken such a beating, a brutal beating at that I’m talking well over 100 cuttings from various strains, all healthy and striving mid veg late veg early flower I have tried everything possible I have read online, books, I know that there are some strains nearly impossible to clone, and auto flower strains are a no no, cutting on a angle 45 slicing the first layer of stem, splitting it in the middle, rooting gel, powder, Epson salt rain water, homemade bubble cloner, nothing I do works, but there is one thing I just thought of since we are talking genetics, and creating a new life, I do have 4 children out there so I know I have something very fertile, I just don’t want to say what I’m thinking of doing, lmfao I can’t believe this fucking shit I’m way too stoned for this, but wtf you never know right? someone please help I’m having a problem

I did thenrockwool and after 2 weeks only one had roots. So I I cut new clones dipped in clones and plsnn

I have never reached out to anyone for help before, mainly because of the fact I can research and find most answers myself, and also that I am fully capable to do things better than most except when it comes to cloning, I will admit defeat only because I have taken such a beating, a brutal beating at that I’m talking well over 100 cuttings from various strains, all healthy and striving mid veg late veg early flower I have tried everything possible I have read online, books, I know that there are some strains nearly impossible to clone, and auto flower strains are a no no, cutting on a angle 45 slicing the first layer of stem, splitting it in the middle, rooting gel, powder, Epson salt rain water, homemade bubble cloner, nothing I do works, but there is one thing I just thought of since we are talking genetics, and creating a new life, I do have 4 children out there so I know I have something very fertile, I just don’t want to say what I’m thinking of doing, lmfao I can’t believe this fucking shit I’m way too stoned for this, but wtf you never know right? someone please help I’m having a problem

Hey. I tried rockwool and only one out of 11 rootef agter 2 weeks. So I cut new clone and stuck them outside in my garden and rooted in 4 days. That was august 5th. Here they are now. Hope that helps. You could get coast of maine soil and put your clone in a solo cup.

 

[Cash_Crop]

I did thenrockwool and after 2 weeks only one had roots. So I I cut new clones dipped in clones and plsnn

Hey. I tried rockwool and only one out of 11 rootef agter 2 weeks. So I cut new clone and stuck them outside in my garden and rooted in 4 days. That was august 5th. Here they are now. Hope that helps. You could get coast of maine soil and put your clone in a solo cup.

Trust me, I have tried everything and am a firm believer of kiss rule, I use it for everything in life, Cloning for me has been impossible, and I’m he type of person to go ocd on this and shred my plants limb for limb until I get there hang of it. I’m finally on to something I think, my grow area is in my shop which is a dirty garage, but I try to keep the confined and I contaminated in theee own area, but nevertheless we are talking about bacteria and unsteady temperatures in the past,, I’ve been getting some great ideas, Anyways yours are looking nice and healthy, good job Shizrock, I just bought some hydroguard today so I’m going to try a few in starter cubes and a few in a pro mix Soil mix,. Oh btw I found the sickest little tiny Dixie cups at dollarama, they are like a mini shot glass, awsomeeee! I just had 30 seeds root over night in a glass of water so I stuck them in soil soaked in theirs tiny Dixie cups, I put them about 1/4 - 1/2 inch deep. Do you think I should put them under a fluorescent or wait until the seed sprouts above the soil?

 

[Cash_Crop]

Are you serious? You do all that? Just to clone?

I don't understand why people make cloning so complicated. Cut clone, dip in rooting compound, "I have just started using honey and am sold", put in coco or soil. Keep out of direct light and have roots in under a week.

Wow it must be nice, you have a natural gift! Thank the weed gods!!

 

[Don_Sequitor]

If you think about it, cloning is quite amazing.

 

[Shizrock]

I have never reached out to anyone for help before, mainly because of the fact I can research and find most answers myself, and also that I am fully capable to do things better than most except when it comes to cloning, I will admit defeat only because I have taken such a beating, a brutal beating at that I’m talking well over 100 cuttings from various strains, all healthy and striving mid veg late veg early flower I have tried everything possible I have read online, books, I know that there are some strains nearly impossible to clone, and auto flower strains are a no no, cutting on a angle 45 slicing the first layer of stem, splitting it in the middle, rooting gel, powder, Epson salt rain water, homemade bubble cloner, nothing I do works, but there is one thing I just thought of since we are talking genetics, and creating a new life, I do have 4 children out there so I know I have something very fertile, I just don’t want to say what I’m thinking of doing, lmfao I can’t believe this fucking shit I’m way too stoned for this, but wtf you never know right? someone please help I’m having a problem

Also I use clonex rooting gel. This is my first grow. My outdoor girls should be teady soon.

Trust me, I have tried everything and am a firm believer of kiss rule, I use it for everything in life, Cloning for me has been impossible, and I’m he type of person to go ocd on this and shred my plants limb for limb until I get there hang of it. I’m finally on to something I think, my grow area is in my shop which is a dirty garage, but I try to keep the confined and I contaminated in theee own area, but nevertheless we are talking about bacteria and unsteady temperatures in the past,, I’ve been getting some great ideas, Anyways yours are looking nice and healthy, good job Shizrock, I just bought some hydroguard today so I’m going to try a few in starter cubes and a few in a pro mix Soil mix,. Oh btw I found the sickest little tiny Dixie cups at dollarama, they are like a mini shot glass, awsomeeee! I just had 30 seeds root over night in a glass of water so I stuck them in soil soaked in theirs tiny Dixie cups, I put them about 1/4 - 1/2 inch deep. Do you think I should put them under a fluorescent or wait until the seed sprouts above the soil?

That's awesome about your seeds. You are cutting the clones 4 or more nodes down and cutting it at a node. I cut the 5th node. I would keep it in a warm place by a window until it peeks out. I started one seed and put it in my grow tent led light was 3 feet above it. At 25% lighting. I just bought a viparspectra par700 a few weeks back. This is my first grow. I have had a lot of good suggestions from my buddy who has been growing for years. Once your seedling has 4 sets of branches you can lower the light and increase intensity a quarter turn. That's if your lights are adjustable.

 

[Mak'er Grow]

Oh btw I found the sickest little tiny Dixie cups at dollarama, they are like a mini shot glass, awsomeeee!

I use the same ones I think...dollarama is great for things like these and my favorite thing about them is they are very CHEAP too...well I use 2 types, but I cut my cubes in half and trim edges to make little pucks that fit nicely in the bottoms.
I use 2 cups per clone (bottle cap as a spacer between cups) with holes in the bottom of the cups so I can't over water them...just wait until they dry and replenish when needed...mainly I just mist the domes.


6 clones I'm re-vegging atm. 3 x Green Crack and 3 x Karibbean Mango...mini white "solo" looking cups cut in half.


6 veg'd clones of Green Crack...in clear shot glasses.

Cost me about $2 a tray and after its built/assembled the only cost is the price of rockwool cubes.

 

[Shizrock]

I use the same ones I think...dollarama is great for things like these and my favorite thing about them is they are very CHEAP too...well I use 2 types, but I cut my cubes in half and trim edges to make little pucks that fit nicely in the bottoms.
I use 2 cups per clone (bottle cap as a spacer between cups) with holes in the bottom of the cups so I can't over water them...just wait until they dry and replenish when needed...mainly I just mist the domes.

View attachment 4391728
6 clones I'm re-vegging atm. 3 x Green Crack and 3 x Karibbean Mango...mini white "solo" looking cups cut in half.

View attachment 4391729
6 veg'd clones of Green Crack...in clear shot glasses.

Cost me about $2 a tray and after its built/assembled the only cost is the price of rockwool cubes.

I never saw a clone cut with bud. How does it it do? Does it stay in flower or go into vegetation?

 

[Mak'er Grow]

I never saw a clone cut with bud. How does it it do? Does it stay in flower or go into vegetation?

Yes they are/were from the lower branches...popcorn buds from flowering plants...its called re-vegging I believe the term is...basically turn it back to a vegging state and grow it up then flower it again.
I had t do this to my plants after a bad war with mites...saved a few clipping off each plant and did big clean up of the room. So now I'm kind of in limbo until everything starts getting big enough again.

 

[Shizrock]

Yes they are/were from the lower branches...popcorn buds from flowering plants...its called re-vegging I believe the term is...basically turn it back to a vegging state and grow it up then flower it again.
I had t do this to my plants after a bad war with mites...saved a few clipping off each plant and did big clean up of the room. So now I'm kind of in limbo until everything starts getting big enough again.

I had spider mites on my outdoor grow. Caught them in time. Used azamax and then hosed them down. Did it 3 times in a 2 week span. So much to consider when growing. I only grew outdoors because it's my first grow and got a tent and setup at the end of july. Good luck with your grow!

 

[Mak'er Grow]

I had spider mites on my outdoor grow. Caught them in time. Used azamax and then hosed them down. Did it 3 times in a 2 week span. So much to consider when growing. I only grew outdoors because it's my first grow and got a tent and setup at the end of july. Good luck with your grow!

I do indoor mostly...self built hydro-hybrid thing...I do have a couple outside, but they are only there to see what they will produce without any attention and to see if the area is 'safe'
Thanks and good luck on yours aswell.
Oh and my mites came from another growers place I went to to help harvest...must of had a few hitch hikers I didn't know about until they were everywhere...oh well lesson learned...lol

 

[Shizrock]

I do indoor mostly...self built hydro-hybrid thing...I do have a couple outside, but they are only there to see what they will produce without any attention and to see if the area is 'safe'
Thanks and good luck on yours aswell

Awesome! I sent you a message and or conversation. Instead of replying on cash's thread.