The Chinese Quantum Board Knock Off Builds

coreywebster

coreywebster

Well-Known Member
Rocket Soul said:
A little heads up: led-tech.de have got samsung lm301bs in 2700k 90cri, available in strips and boards. Anyone interested? If so i advice to not sleep too much on it cause i know their stock is at least half gone, a friend bought it. Im not in this time cause the storm left me barescraped with urgent house repairs needed and i also got some blux coming in with that spectrum.
Just a heads up....
Click to expand...
Jesus those guys have a serious range of products.
Been a while since I popped my head in there.

Cant find the 90cri strips though, could you link them Rocket?
 
Rocket Soul

Rocket Soul

Well-Known Member
coreywebster said:
Jesus those guys have a serious range of products.
Been a while since I popped my head in there.

Cant find the 90cri strips though, could you link them Rocket?
Click to expand...
I think you have to write them an email. This iis what their IG account gave me:
René:
[email protected]

There seems to be many options:
Strips: white and red supp (the red supp are fairly extreme, almost HGL like spectrum)
Boards: both white and with red supp on a separate channel. One of the most complete all in one boards available. Would love to see these coupled with prawns high lights.

Are you a euro peep corey? I always assumed stateside
 
ronintank

ronintank

Well-Known Member
Moflow said:
@ronintank Have you checked these out?
Very good price if you're State Side

ALL

High Efficiency Quantum Boards® Grow Lamps, Horticulture Modules, Kits and accessories by Horticulture Lighting Group
horticulturelightinggroup.com horticulturelightinggroup.com

4 of them would be nice in a 2 x 4 tent or 8, even better! lol
Click to expand...

so would this power supply be the right one?
 

Attachments

fragileassassin

fragileassassin

Well-Known Member
ronintank said:
Oh yeah. sitting state side in the legal mitten state 12 plants per household.
I have looked at those 288 v1 boards and thought what was wrong with them at the low price.
I have access to alum. plate and angle to make the mounting.
Click to expand...
There is nothing wrong with them other than they are not the newest hotness 301 diodes. Look up some 561 vs 301 comparisons and I think youll be surprised.
 
Rocket Soul

Rocket Soul

Well-Known Member
ronintank said:
Oh yeah. sitting state side in the legal mitten state 12 plants per household.
I have looked at those 288 v1 boards and thought what was wrong with them at the low price.
I have access to alum. plate and angle to make the mounting.
Click to expand...
Go for it! The new hlg v1 prices makes them completely price comparable to the alis, especially since theres no import taxes for stateside peeps. Imo, Its much better to figure out a way to get even coverage than go for less board with toptop diodes but less boards, harder driven and higher up. The meijiu fotop board on a 240 w driver easily covered a 4x2 aprox at ours; this setup (if you do 2 separate alu sheets) willl have more diodes than a fotop and better spread. For low watts per board a 48A driver will work fine,, youll have better output.
 
Rocket Soul

Rocket Soul

Well-Known Member
ronintank said:
so would this power supply be the right one?
Click to expand...
For this wattage per board the voltage is close enough to 48 that a voltage dimming hlg240-48A (or even better 48AB) would work, you just beed to adjust up voltage slightly. This will give you more light out of the boards. 54V driver will have plenty of voltaage over head but lower amps output.
 
ronintank

ronintank

Well-Known Member
Rocket Soul said:
For this wattage per board the voltage is close enough to 48 that a voltage dimming hlg240-48A (or even better 48AB) would work, you just beed to adjust up voltage slightly. This will give you more light out of the boards. 54V driver will have plenty of voltaage over head but lower amps output.
Click to expand...
i will look at those tonight. thanks for the input guys
 
bigmikey86

bigmikey86

Well-Known Member
The timer is set for the 730 strips. They’ll be on for 3 mins at lights out. I’m curious to see how fast the flip will be with this. My boards will be on for 14 and off for 10. This should be fun.
 
Humple

Humple

Well-Known Member
Rocket Soul said:
Especially if it means youre getting 2 boards instead of one. Also, hlg do some quality shit. Id say this hlg deal, on half power is probs one of the best deals available for a diy friendly US peep, with access to some alusheet.
Click to expand...
I'm really surprised they haven't sold out yet. Makes me wonder how many they had sitting there when they released the v2. Glad I got mine before they were gone though!
 
ronintank

ronintank

Well-Known Member
Rocket Soul said:
Go for it! The new hlg v1 prices makes them completely price comparable to the alis, especially since theres no import taxes for stateside peeps. Imo, Its much better to figure out a way to get even coverage than go for less board with toptop diodes but less boards, harder driven and higher up. The meijiu fotop board on a 240 w driver easily covered a 4x2 aprox at ours; this setup (if you do 2 separate alu sheets) willl have more diodes than a fotop and better spread. For low watts per board a 48A driver will work fine,, youll have better output.
Click to expand...
Every thing is on order. When the parts come I will post a couple pics of the build. Got extra duct tape for the hanger.
Thanks so much to all that helped.
 
You must log in or register to reply here.
Top