Well thanks. I studied every forum and how to on growing one like that. Figured i would try it on this one. Im just nervous about cutting anything off. And yes its a female and sad to say but i did do all the work before i knew if it was female or not. But i just turned the lights 12/12 on the 14th and im seeing nice little preflowers with hairs on em.
Oh yea and i took it out of the grow tent to take the picture thats why it dosent look like its getting good light. But i have a 1200w led 235w draw and a 600w led 115w draw in my tent.
Well i read a bunch on leds and talked to many people about them and i found out that when it says its a 1200 watt dont even consider that part. You have to look at the actual draw wattage(235w)but i did talk to someone who has been using the same lights i have and he uses 2,1200w on a 4×8 table and he says its always done the job. But you know how everyone has different opinions. also leds have supposedly come a long way in the last few years But from what i read one of the biggest mistakes with the leds is the factory says "it will cover a 5.5ft×5.5ft area at 24in and 32in.so thats where people mess up. It will only cover a 2×4 area at 18inches effectively. But ill find out soon enough. I just flipped the lights 12/12 on march 14th
You did a great job with topping and LST. I would leave them alone. Don't pick anything off now. They look great. Just keep doing what you're doing and be careful who you listen to on here.
Thanks that is what i needed to know. 3 nodes and then everything after that. Ok but there are some taller shoots (2 or 3 inch) below the third node, they are a lot thinner and smaller than the mains. Do those stay? Then there are the ones that are not grown away from the branch yet. Those get cut right?
where the white straw is, that is the 3rd node. I put the lighter next to the next 2 tops, and they have one on each side. Then the same on the branch below. The tops on the next branch lower are just now getting as tall as the next branch. Do those go?
