Having problems

[J.louis]

Hey you guys.... I seem to be having problems with one of my ladies. Since I transplanted her into her last pot I’ve had really no growth at all and now she looks like this? She’s under gavita led 1700e and I’m feeding her advanced nut a+b Sensi grow with b52 and voodoo juice. Ph is 6.5-6.8 I have also added some cal-mag. Can anyone help me out.

 

[Ladre87]

Did you mix your nutritions correct order?

 

[J.louis]

I normally mix b52 and voodoo then a+b then cal-mag is this the correct order? Just need to get her back to life. I’ve also got deep purple stems and veins. Never normally get these problems I’m just wondering if it’s the strain I’m not used to!.

 

[Airwalker16]

I normally mix b52 and voodoo then a+b then cal-mag is this the correct order? Just need to get her back to life. I’ve also got deep purple stems and veins. Never normally get these problems I’m just wondering if it’s the strain I’m not used to!.

CalMag has to be mixed very first AND very well. You've got nute lockout if you didn't.
CalMag, MIX, A, MIX, B, MIX, then supplements and pH LAST.

 

[J.louis]

Hi thanks for the advice time to flush and mix up a fresh batch then! Let’s hope she makes a recovery or I’ll have to just put her in the trash!

 

[Airwalker16]

Hi thanks for the advice time to flush and mix up a fresh batch then! Let’s hope she makes a recovery or I’ll have to just put her in the trash!

Just get fresh correctly mixed nutes in there and it'll be fine. Highly recommend you use 0ppm reverse osmosis water to start with as well.

 

[J.louis]

Thanks I’ll give it a go a keep a eye out over the next few days.

 

[Ladre87]

I normally mix b52 and voodoo then a+b then cal-mag is this the correct order? Just need to get her back to life. I’ve also got deep purple stems and veins. Never normally get these problems I’m just wondering if it’s the strain I’m not used to!.

1. Add Silicon and give solution at least one hour to dissolve
2. Add Cal/Mag supplement
3. Add Base Nutrients
   • First “Micro”
   • Second “Grow”
   • Third “Bloom”
4. Add Bloom Booster
5. Add Humic Acid
6. Add SM-90 (I now use RAW Yucca as a wetting agent instead. See our article: "Recommended Nutrient Supplements for Growing Cannabis")
7. Measure and adjust the pH of the solution
8. Add Rapid Start
9. Add H2O2 (if needed for reservoir)

thats your order. I will give some tips never add ph directly your solution. adulterate water fırst. you can skip some suplement. but never skip the queue. you can wacht a youtube video for avoit any nutrition lockout.

 

[Ladre87]

you have cal-mag deficiency for this plant. thats why ı ask this question. because you use cal-mag

 

[J.louis]

Just get fresh correctly mixed nutes in there and it'll be fine. Highly recommend you use 0ppm reverse osmosis water to start with as well.

Do you not think I should run just some cal-mag mix ph mix then see if she perks up. Not sure if I want to feed her anymore right now as also have some tip burn.

 

[J.louis]

you have cal-mag deficiency for this plant. thats why ı ask this question. because you use cal-mag

Thanks I’ll remember to add in the order you have given. Do you think I should flush well first before I start adding more food?. And should I flush with ph tap water or ph RO water?

 

[Airwalker16]

Thanks I’ll remember to add in the order you have given. Do you think I should flush well first before I start adding more food?. And should I flush with ph tap water or ph RO water?

If you're going to use pure RO water you NEVER pH it man.
PHing is so NUTRIENTS can be uptaken. Water doesnt need that. RO is right around 7 anyways.

 

[J.louis]

My RO water comes out around a ph of 4.5 so I’m just going to continue using tap water left for 24hrs. If you was going to flush the plant how would you do it? Surly just tap water would do then a light feed once the run off is clean. Blue lab truncheon broke last week so I can’t test the run off.

 

[Airwalker16]

My RO water comes out around a ph of 4.5 so I’m just going to continue using tap water left for 24hrs. If you was going to flush the plant how would you do it? Surly just tap water would do then a light feed once the run off is clean. Blue lab truncheon broke last week so I can’t test the run off.

Why would you ever use tap water when you have 0ppm clean slate waters use the RO duh.

 

[J.louis]

Ive only just installed the ro water system and I’ve never grown with it before. Was going to start with my next crop.
Do you use RO WATER?
what would your schedule be if you was using RO water at 4.5/5.0 ph?
I have no ph up and like I explains in the first thread I’m using advanced nutrients in the grow stage ( Sensi a-b, b52, voodoo juice)
thanks

 

[1212ham]

My RO water comes out around a ph of 4.5 so I’m just going to continue using tap water left for 24hrs. If you was going to flush the plant how would you do it? Surly just tap water would do then a light feed once the run off is clean. Blue lab truncheon broke last week so I can’t test the run off.

There is no point in measuring the ph of RO water. Since almost all ions are removed, it has a very weak ph that is easily changed by anything added to it. Like Airwalker said, mix you nutes in the order given, then ph it.

 

[J.louis]

And I also have added in some (plant magic cal-mag)

 

[J.louis]

There is no point in measuring the ph of RO water. Since almost all ions are removed, it has a very weak ph.
Like Airwalker said, mix you nutes in the order given, then ph it.

Thanks still new to this so thanks for your patience haha Do I stick to tap water then!? And if I use ro water and the nutrients mentioned earlier I don’t have to ph after?

 

[Airwalker16]

Yes, RO water is a huge benefit to any Hydro setup.

 

[1212ham]

Thanks still new to this so thanks for your patience haha Do I stick to tap water then!? And if I use ro water and the nutrients mentioned earlier I don’t have to ph after?

I'd use RO water. Add nutes in the order given, then ph it. https://www.rollitup.org/f/marijuana-plant-problems.65/