Having problems

J

J.louis

New Member
Hey you guys.... I seem to be having problems with one of my ladies. Since I transplanted her into her last pot I’ve had really no growth at all and now she looks like this? She’s under gavita led 1700e and I’m feeding her advanced nut a+b Sensi grow with b52 and voodoo juice. Ph is 6.5-6.8 I have also added some cal-mag. Can anyone help me out.
 

Attachments

J

J.louis

New Member
I normally mix b52 and voodoo then a+b then cal-mag is this the correct order? Just need to get her back to life. I’ve also got deep purple stems and veins. Never normally get these problems I’m just wondering if it’s the strain I’m not used to!.
 
Airwalker16

Airwalker16

Well-Known Member
J.louis said:
I normally mix b52 and voodoo then a+b then cal-mag is this the correct order? Just need to get her back to life. I’ve also got deep purple stems and veins. Never normally get these problems I’m just wondering if it’s the strain I’m not used to!.
Click to expand...
CalMag has to be mixed very first AND very well. You've got nute lockout if you didn't.
CalMag, MIX, A, MIX, B, MIX, then supplements and pH LAST.
 
J

J.louis

New Member
Hi thanks for the advice time to flush and mix up a fresh batch then! Let’s hope she makes a recovery or I’ll have to just put her in the trash!
 
Airwalker16

Airwalker16

Well-Known Member
J.louis said:
Hi thanks for the advice time to flush and mix up a fresh batch then! Let’s hope she makes a recovery or I’ll have to just put her in the trash!
Click to expand...
Just get fresh correctly mixed nutes in there and it'll be fine. Highly recommend you use 0ppm reverse osmosis water to start with as well.
 
Ladre87

Ladre87

Well-Known Member
J.louis said:
I normally mix b52 and voodoo then a+b then cal-mag is this the correct order? Just need to get her back to life. I’ve also got deep purple stems and veins. Never normally get these problems I’m just wondering if it’s the strain I’m not used to!.
Click to expand...
  1. Add Silicon and give solution at least one hour to dissolve
  2. Add Cal/Mag supplement
  3. Add Base Nutrients
    • First “Micro”
    • Second “Grow”
    • Third “Bloom”
  4. Add Bloom Booster
  5. Add Humic Acid
  6. Add SM-90 (I now use RAW Yucca as a wetting agent instead. See our article: "Recommended Nutrient Supplements for Growing Cannabis")
  7. Measure and adjust the pH of the solution
  8. Add Rapid Start
  9. Add H2O2 (if needed for reservoir)
thats your order. I will give some tips never add ph directly your solution. adulterate water fırst. you can skip some suplement. but never skip the queue. you can wacht a youtube video for avoit any nutrition lockout.
 
Ladre87

Ladre87

Well-Known Member
you have cal-mag deficiency for this plant. thats why ı ask this question. because you use cal-mag
 
J

J.louis

New Member
Airwalker16 said:
Just get fresh correctly mixed nutes in there and it'll be fine. Highly recommend you use 0ppm reverse osmosis water to start with as well.
Click to expand...
Do you not think I should run just some cal-mag mix ph mix then see if she perks up. Not sure if I want to feed her anymore right now as also have some tip burn.
 
J

J.louis

New Member
Ladre87 said:
you have cal-mag deficiency for this plant. thats why ı ask this question. because you use cal-mag
Click to expand...
Thanks I’ll remember to add in the order you have given. Do you think I should flush well first before I start adding more food?. And should I flush with ph tap water or ph RO water?
 
Airwalker16

Airwalker16

Well-Known Member
J.louis said:
Thanks I’ll remember to add in the order you have given. Do you think I should flush well first before I start adding more food?. And should I flush with ph tap water or ph RO water?
Click to expand...
If you're going to use pure RO water you NEVER pH it man.
PHing is so NUTRIENTS can be uptaken. Water doesnt need that. RO is right around 7 anyways.
 
J

J.louis

New Member
My RO water comes out around a ph of 4.5 so I’m just going to continue using tap water left for 24hrs. If you was going to flush the plant how would you do it? Surly just tap water would do then a light feed once the run off is clean. Blue lab truncheon broke last week so I can’t test the run off.
 
Airwalker16

Airwalker16

Well-Known Member
J.louis said:
My RO water comes out around a ph of 4.5 so I’m just going to continue using tap water left for 24hrs. If you was going to flush the plant how would you do it? Surly just tap water would do then a light feed once the run off is clean. Blue lab truncheon broke last week so I can’t test the run off.
Click to expand...
Why would you ever use tap water when you have 0ppm clean slate waters use the RO duh.
 
J

J.louis

New Member
Ive only just installed the ro water system and I’ve never grown with it before. Was going to start with my next crop.
Do you use RO WATER?
what would your schedule be if you was using RO water at 4.5/5.0 ph?
I have no ph up and like I explains in the first thread I’m using advanced nutrients in the grow stage ( Sensi a-b, b52, voodoo juice)
thanks
 
1

1212ham

Well-Known Member
J.louis said:
My RO water comes out around a ph of 4.5 so I’m just going to continue using tap water left for 24hrs. If you was going to flush the plant how would you do it? Surly just tap water would do then a light feed once the run off is clean. Blue lab truncheon broke last week so I can’t test the run off.
Click to expand...
There is no point in measuring the ph of RO water. Since almost all ions are removed, it has a very weak ph that is easily changed by anything added to it. Like Airwalker said, mix you nutes in the order given, then ph it.
 
Last edited:
J

J.louis

New Member
1212ham said:
There is no point in measuring the ph of RO water. Since almost all ions are removed, it has a very weak ph.
Like Airwalker said, mix you nutes in the order given, then ph it.
Click to expand...
Thanks still new to this so thanks for your patience haha Do I stick to tap water then!? And if I use ro water and the nutrients mentioned earlier I don’t have to ph after?
 
You must log in or register to reply here.
Top