Enter The Scrog/Scroggers United Post Page

jondamon

Well-Known Member
Little update on the per plant scrog

Cut off some of large suckers today as they were getting in the way of undergrowth coming up. Only 4 per plant

I would normally trim this little stuff I’m pointing at but it’s right in line with a net space so they’re staying.
FE8A1178-A8DA-4C95-9125-B353F0FFF3BC.jpeg8713C31D-1399-4795-8AB5-DE929B745978.jpegAE00D316-C370-44F6-A56F-7AD2AA0B82AC.jpeg8E6AC07B-F829-4C5D-A65D-AE3EDE2EBE81.jpeg95BA65E7-232E-4AB0-BB2C-6DE83D9F09E8.jpegDC4D5246-8CF5-4D37-BEFD-EAEB98359EEC.jpeg0451F058-6545-49F0-9603-F0D4FFA6FD02.jpegF4D791B3-E432-4EBB-912F-B4EA5BB94CA3.jpeg890226F8-7220-4BC8-A351-63227BC82F48.jpeg0C272D8E-EBB8-49A3-A6D3-C09386D0F6CE.jpeg
 

Deputy Fife

New Member
Need some SCROG training/pruning advice. I am planning to do a SCROG with 3ft wide by 8ft long welded wire mesh fence material. My plan is to train two leaders from the main stem out like this:
IMG_4533.jpg
I'm planning for the screen to be about 2-3 feet off the ground. At about what height would I top to get two leaders around 2-3feet above the ground after the lower portion of the plant fully stretches?

My plants are ILGM Durban Poision about 6 weeks old, growing in soil in a sunny location at about 39d latitude in a sunny, dry and warm Mediterranean climate.
IMG_4520.jpg

Thanks for any advice.

Peace out.
 

jondamon

Well-Known Member
Need some SCROG training/pruning advice. I am planning to do a SCROG with 3ft wide by 8ft long welded wire mesh fence material. My plan is to train two leaders from the main stem out like this:
View attachment 4571941
I'm planning for the screen to be about 2-3 feet off the ground. At about what height would I top to get two leaders around 2-3feet above the ground after the lower portion of the plant fully stretches?

My plants are ILGM Durban Poision about 6 weeks old, growing in soil in a sunny location at about 39d latitude in a sunny, dry and warm Mediterranean climate.
View attachment 4571945

Thanks for any advice.

Peace out.

Not entirely sure what you’re asking.

you can top your plant anywhere and strip off all other growth besides the 2 leaders you want to keep.

you can do this at any point in time and I would Advise the earlier the better to train the way you are hoping.

if you allow your plant to reach 2-3ft tall before any training the main stalk etc of the plant maybe too strong to bend effectively under a screen it the plants gets too big.
 

jondamon

Well-Known Member
Little update.

more bending tucking and repositioning.

EC1.2 pH5.8
0.2EC source water
0.2EC CalMag
0.8EC base nutrients.
A45DED3F-B940-410E-9FA3-DF1281233114.jpeg93B1A0E0-9C3F-41CC-92EB-1909D2888675.jpegA374C931-49F4-48CB-AF31-46CA5D5A3B06.jpegBC6AADD1-35FF-444B-99EA-C9B0842D0F7B.jpegA4ED4C09-D517-4F09-BE93-0F9A396AEB43.jpegEA6F1DCA-E322-48F9-90F1-F8744BC289D8.jpegB5CDC49B-65D9-40CE-82A2-878BEA00924F.jpegB8D4671E-6A30-4FE4-ABCA-7058A8E394F8.jpeg42E38D0C-93F5-4ED4-B93F-1346F6959FAE.jpeg
 

jondamon

Well-Known Member
I think the next time I use these nets I will create a small plastic frame to hold their shape better as the curve, while easier to bend the leaders in To the net it’s creating too much of a dead spot in the middle of each net.
 

Deputy Fife

New Member
Thanks, I think you got what I was asking. I have 6 nodes above the coteleydons if I get 4” between the nodes it’s already at 2ft. I topped today.

I’m curious, why are Your screens curved?
 

jondamon

Well-Known Member
Thanks, I think you got what I was asking. I have 6 nodes above the coteleydons if I get 4” between the nodes it’s already at 2ft. I topped today.

I’m curious, why are Your screens curved?
Simply because it was plastic trellis netting that was rolled up in a cylinder for storage.

the squares in my net actually used to be 4small squares and I opened them out to give me more room to tuck etc.

this also caused them to be less rigid which means the curve is worse lol.

I’ve owned the screens for over 5 years and only just tried using them. They’ve been in my garden shed since then still rolled up in the cylinder.
 

jondamon

Well-Known Member
A little more bending and tucking.

it would be very difficult for me to do this tucking etc if this was one whole screen.
As it happens I took 2 plants out to be able to get to all of them lol.

Day 14 of 12/12.
EC 1.3
Source water 0.2EC
Calcium 0.2EC
Base nutes 0.9EC. 4C84079F-8516-46AE-93B7-41187A9B7E2E.jpeg25939CB7-08DE-4EB2-88E1-D28ACA2DF385.jpeg628A1887-EDCF-47EE-B483-638517979648.jpeg9AC02262-A40E-4D6B-9AAA-1A670A24C7AC.jpeg87F60F34-A1E6-4C2F-9F8D-FC379FDE6598.jpeg12531DCB-2B1E-4F92-85AD-7F6EF3BC2435.jpeg
 

FADING-SILHOUETTE

Well-Known Member
20200524_165955.jpg

Well .. that's that done .. I'll add a LINK to my thread once I've added all my new pics... that 1x 3x3 pretty much packed !! - STELTHY :leaf:


 
Last edited:

FireBudzz420

Well-Known Member
Just started my 10 Stardawg F2s 3days in soil already popped, I decided to go with an SoG style grow. 4x2 tent 48×24×60. 600w hps/MH currently running 400w. I will be adding promix hp im currently using some organic mix only thing i had. I will be upgrading to a tray to catch run off. Check out the cake pans :bigjoint:
20200528_032128_HDR.jpg
 

jondamon

Well-Known Member
Little update from Wednesday.
Just a look over the canopy.


plants are being fed 1.3EC of grow Base Nutes (0.9) and extra Calcium (0.2) source water is 0.2EC.D0D1F210-DD14-4E89-985E-6440EA6A6AED.jpegDD18AEF3-F8B7-4A60-AF5F-D5746DF1AD4F.jpeg17370ED4-C670-4621-9298-493EDDA8BB9A.jpeg180DD66C-CAFC-45B0-B966-AFC8302FD3BF.jpeg
 

Lpt

Well-Known Member
Nice work @jondamon enjoying watching your grow come along!!

I decided against the second scrog and one leak and 25 days later (from flip) mine are looking ok ish I think. So much to learn and so much to do!! 3x zkittle gorilla a 1x royale gorilla in a 1200x1200..
My tap water rages between .6 and .8 ec so feeding has been tricky ish at times!! As youl.will see in the last pic I managed to get a flexible 1200x1200 tray and slide it in under the plants to make any further leaks less irritating
 

Attachments

Top