MidnightSun72
Well-Known Member
Hi I am new to LEDs but I’ve been reading a lot. Just bit the bullet and ordered 100 Strips of BXEB-L1120Z-35E8000-C-D3.
And 17 HLG 320H 36A drivers. The plan is to run 6 strips per driver at 1.4a and 38.4V so no heat sinks are required.
I will mount 12 strips to a 4x4 aluminum frame still haven’t settled on a design as I am still waiting on quotes for different aluminum sections to see what’s most economical.
These strips are 3500K colour temp. Around 53.4W each rate at 185lm/w Don’t know what the umol/s. Each fixture will be 640W and the two HLG320s will be maxed out. Am I missing anything here? Anything I am overlooking or should know? I am also exploring adding a wired or wireless 0-10V controller. Would love to use these with an actual grow room controller if possible.
I also want to add 660nm and 730nm red strips but don’t know of any good strip with a matching firm factor. Can anyone point me inThe right direction? Thanks.
And 17 HLG 320H 36A drivers. The plan is to run 6 strips per driver at 1.4a and 38.4V so no heat sinks are required.
I will mount 12 strips to a 4x4 aluminum frame still haven’t settled on a design as I am still waiting on quotes for different aluminum sections to see what’s most economical.
These strips are 3500K colour temp. Around 53.4W each rate at 185lm/w Don’t know what the umol/s. Each fixture will be 640W and the two HLG320s will be maxed out. Am I missing anything here? Anything I am overlooking or should know? I am also exploring adding a wired or wireless 0-10V controller. Would love to use these with an actual grow room controller if possible.
I also want to add 660nm and 730nm red strips but don’t know of any good strip with a matching firm factor. Can anyone point me inThe right direction? Thanks.