Bubblehash problem finest mash

G

Greennner

Well-Known Member
Hellooo

I have a lot of trimm left. (1-2pound)
I do bho , dry hash and bubbleator

But i havent done bubbelator for a time now,
Because it was a pain i the ass ,
the last bag with 30my needs easy 24 hours to drain.

Do you have any advice for me ???


(I clean my 5gal bags with alcohol bevor use)
 
JimmiP

JimmiP

Well-Known Member
Greennner said:
Hellooo

I have a lot of trimm left. (1-2pound)
I do bho , dry hash and bubbleator

But i havent done bubbelator for a time now,
Because it was a pain i the ass ,
the last bag with 30my needs easy 24 hours to drain.

Do you have any advice for me ???


(I clean my 5gal bags with alcohol bevor use)
Click to expand...
Have you tried watching Frenchy Cannoli's videos? He's got a lot of insight when it comes to the process.
I've never had a bag take that long to drain. Even of course the 25 micron bag. But there's a way to really reduce the drain time. Use a shop vacuum. Just have a small hole on the side, near the bottom of a 5 gallon bucket. Put your bottomless 25 micron bag bucket into the bucket with the small hole and apply suction from the shop vacuum. It's now a vacuum filtration rig. Just limit the amount of suction or the bag might get sucked off the bucket rim.
If you haven't watched Frenchie's videos, I would again recommend them. The methods he teaches makes the process go much more smoothly.
Either way have fun with it. I'm going out to run some trim, from my Passion Fruit plant, in the washer today! I love making the stuff!
Good luck friend!
 
G

Greennner

Well-Known Member
JimmiP said:
Have you tried watching Frenchy Cannoli's videos? He's got a lot of insight when it comes to the process.
I've never had a bag take that long to drain. Even of course the 25 micron bag. But there's a way to really reduce the drain time. Use a shop vacuum. Just have a small hole on the side, near the bottom of a 5 gallon bucket. Put your bottomless 25 micron bag bucket into the bucket with the small hole and apply suction from the shop vacuum. It's now a vacuum filtration rig. Just limit the amount of suction or the bag might get sucked off the bucket rim.
If you haven't watched Frenchie's videos, I would again recommend them. The methods he teaches makes the process go much more smoothly.
Either way have fun with it. I'm going out to run some trim, from my Passion Fruit plant, in the washer today! I love making the stuff!
Good luck friend!
Click to expand...
That is the first Thing i will do now,watching hash Marina Videos, i love it ;)
Thank you!
 
JimmiP

JimmiP

Well-Known Member
Greennner said:
I do , i shake , squirl/panning
But it still needs that long :/

how much material do you use Max. In a 5gallon bubblebag? 200-300gramm .
Click to expand...
I use around 300g or less in the washer I have.
Are you using full mesh bags or the canvas sided type?
 
G

Greennner

Well-Known Member
youraveragehorticulturist said:
Did you mean to say your last bag was 30 microns?

You might consider just not using that bag when you make hash. With a 30 micron bag you may just be catching mostly chlorophyll while all the good stuff is up in the 70 micron bag.
Click to expand...
Yes 30 microns

I think i will try it , if i still get around 10% out of it, its nice ;)
 
myke

myke

Well-Known Member
Buy full mesh bags 8 bag kit,the 25 bag is not very good anyway so most dont even bother.45 and 73 then 190 or so to catch the shit.Seems to work for me.
 
JimmiP

JimmiP

Well-Known Member
myke said:
Buy full mesh bags 8 bag kit,the 25 bag is not very good anyway so most dont even bother.45 and 73 then 190 or so to catch the shit.Seems to work for me.
Click to expand...
I use 220and 190 for sieving the greenplant material then 160, (sometimes the 72) and the 45, stacked with each having its own bottomless five gallon bucket as a frame. The 25 micron bag also has its own bottomless bucket frame but sits inside of a 28 gallon basin below everything else. Then before I try to drain the 25 bucket I will remove the water in the basin. Taking the water from beside the bucket makes the water level in the bucket drop just as fast. Then when I finally pull the bucket its just about empty already. It is set up like this. Screenshot_20210307-111007_Gallery.jpg
 
G

Greennner

Well-Known Member
I just tryed it an other way.

Just 73 ,160 and 220 ,
and let the left over water sit over night in buckets,
next day slowly removed the water from the top, Till i had just a lill bit of water in the bucket , put all together (1 gal total) in the 25 micron bag and drain it (helped with a fine paint brust, Bush the screen)

Work pretty good, but the 25 microm stuff is really really Black and oily
 
Herb & Suds

Herb & Suds

Well-Known Member
I don't know why you are leaving them in buckets?

I take one bucket and hang the bags above it
Completely drained by morning

Brushing pushes all the nasties thru
 
G

Greennner

Well-Known Member
Herb & Suds said:
I don't know why you are leaving them in buckets?

I take one bucket and hang the bags above it
Completely drained by morning

Brushing pushes all the nasties thru
Click to expand...
Just the water , because when i put All the water in the 25 micron bag ,
i had to drain it 5 Times each drain 3 gal. Water ,wouold need days with my 25 micron bag.
I think my bags might be to old and i have to buy New one , the full mash bags looking awesome


And i have tryed hang my 25 micron bag, and 24 hours later , drain maybe a half galon :/
 
Herb & Suds

Herb & Suds

Well-Known Member
Greennner said:
Just the water , because when i put All the water in the 25 micron bag ,
i had to drain it 5 Times each drain 3 gal. Water ,wouold need days with my 25 micron bag.
I think my bags might be to old and i have to buy New one , the full mash bags looking awesome


And i have tryed hang my 25 micron bag, and 24 hours later , drain maybe a half galon :/
Click to expand...
It is plugged up with plant matter not hash
Clean with 91% alcohol
25 micron is for the scrap pile
 
You must log in or register to reply here.
Top