Cell phone sensors are unreliable at best, and they are not able to measure PAR accurately. They will attempt to measure LUX, and then use a math formula to convert it to PAR.
Weres your net at. All those buds could be that size. Better to sacrifice a few colas to high intensity of light so the lowers fill out. Looks dank
use the popcorn setting then 2 mins on defrost
You've been told over and over. Your problem is it's not done yet. Enough with these threads already.
I agree.
cre.science
You were convinced on your first run that the lights were too close and ruined your plants. You didn't let them finish and binned them.The Halo - FLUXengine x4 | Crescience
The Halo is different from the boards out there. It shines from all sides onto the cultivated area, so there is hardly any shadowing. It also illuminates the last corner of the 60 x 60 cm. It does the job very cool and efficient. This is also due to the amount of LED chips. There are 560 LM301H...
the closer ones sadly are very near at less then 20 cm , i have now dimmed
i didnt do the same thing by an accident had to run 2 diferent strain , one outgrow the other , lsd are at the right distance , dont need to be harsh
I'm sure you tested the LSD? Did you get high? No. Well you can eliminate the lights being to close or strong as a possible issue.
If it isnt the lights what could be , everything is in place
They aren't done? Think that's been pointed out already.
I agree with that. I just did my first run with a trellis instead of stakes and I totally regret it. I have 9 different plants all doing 9 different things and I can only reach the ones in front. I have no idea what's going on in that back row as far as herms or whatnot. I'm at over 10 weeks of flowering now and of course the plants in the back row are ready to chop but the front girls could use another week or so.
Genetics and letting the plants finish properly are the biggest keys to potency.
I had some grows may have been too long and eventually found I had a sticky timer. Even though it's digital it acts like it's spring loaded so I think maybe it is. Turns off about 20-30 mins later than it's set for. So I was giving 12hr+20mins liht. Maybe that did something. Just thought I'd throw that out there cuz I'm usually not around when they turn on/off. Check your timers and check them with a load on them.This is now day 4 of week 11 . Breeder says 9 weeks , i added 2 more weeks , the problem is that i still have white pistils (plenty in one of the genetics few in the other) on day 74 after flip and most thricomes are clear few milky and 0 amber . I also tested for potency and pontecy is 0 . What is going wrong with my grow !?
This is the aspect from 3 days ago , still almost the same aspect, of the 2 genetics :
White widow
View attachment 4882121
white widow zoom in :
View attachment 4882122
LSD :
View attachment 4882123
LSD zoom in :
View attachment 4882124
What is making them take so long , also worthy mentioning the white widow is bigger and getting more then 1000ppfd , while the lsd is getting the correct amount of ppfd , about 900 . But both dont get me high at this current stage
The lights might be a little close, but not to a point that it's gonna majorly fuck anything up. The specs for the light say it's 165watts spread over 560 diodes, which isn't a ton of light.The Halo - FLUXengine x4 | Crescience
The Halo is different from the boards out there. It shines from all sides onto the cultivated area, so there is hardly any shadowing. It also illuminates the last corner of the 60 x 60 cm. It does the job very cool and efficient. This is also due to the amount of LED chips. There are 560 LM301H...
the closer ones sadly are very near at less then 20 cm , i have now dimmed
