Are these readings safe ? Feed vs run off

[Pauly1118]

First set of pics is the feed I put in and second set of pics is run off water


70/30 coco/perlite

 

[Dr. Who]

What media are you growing in?

Basically put; What ever "run-off" metering you take.
YOU'R ONLY GETTING THE READING OF THE RUN OFF!
Not the soil or media as for pH!

You should also note that; EC of the run - off IS different then the EC of the liquid before being put in!

pH your ingoing FEEDING MIX to 5.8 or 5.9 and run it through.
The pH of the media will swing one way and then slowly swing back again as it dries out. This is a natural "swing" that helps the proper uptake of the nutrients at their best pH availability points.....

Consider your doing HYDROPONIC style with that media. Be sure you use a Cal/Mg to counter the Coco... I suggest a calcium carbonate based product. Avoid Calcium nitrate based, as it will add N and not be as good at controlling pH..

Good luck.

 

[Pauly1118]

What media are you growing in?

Basically put; What ever "run-off" metering you take.
YOU'R ONLY GETTING THE READING OF THE RUN OFF!
Not the soil or media as for pH!

You should also note that; EC of the run - off IS different then the EC of the liquid before being put in!

pH your ingoing FEEDING MIX to 5.8 or 5.9 and run it through.
The pH of the media will swing one way and then slowly swing back again as it dries out. This is a natural "swing" that helps the proper uptake of the nutrients at their best pH availability points.....

Consider your doing HYDROPONIC style with that media. Be sure you use a Cal/Mg to counter the Coco... I suggest a calcium carbonate based product. Avoid Calcium nitrate based, as it will add N and not be as good at controlling pH..

Good luck.

I’m growing in 70/30 coco / perlite

I used CloneX and RapidStart for seedling

I transplanted last night from a solo cup to my 5.5 gallon air pots

For this feeding I used

5 ml humboldts base a
5 ml humboldts base b
1 ml humboldts golden tree
1 teaspoon myco+
5 ml cal-mag (mixed first)

/per gallon

Then adjusted ph to 5.8 after mixing all my nutrients

I also posted pictures of my meter readings

First 5 was after mixing

2nd set of 5 pictures was run off water after feeding

 

[Dr. Who]

I’m growing in 70/30 coco / perlite

I used CloneX and RapidStart for seedling

I transplanted last night from a solo cup to my 5.5 gallon air pots

For this feeding I used

5 ml humboldts base a
5 ml humboldts base b
1 ml humboldts golden tree
1 teaspoon myco+
5 ml cal-mag (mixed first)

/per gallon

Then adjusted ph to 5.8 after mixing all my nutrients

I also posted pictures of my meter readings

First 5 was after mixing

2nd set of 5 pictures was run off water after feeding

OK good show!

You might want to add some Silica to any hydro run. Dyna Gro's is a go to Si product - (Protekt)

Now then. Stick to what I said for pHing the feed mix to 5.8 - 5.9.

Let your media dry down pretty good before feeding again..

Don't bother with run off metering... Adjust only what you put in to make any long term pH change..

 

[Pauly1118]

OK good show!

You might want to add some Silica to any hydro run. Dyna Gro's is a go to Si product - (Protekt)

Now then. Stick to what I said for pHing the feed mix to 5.8 - 5.9.

Let your media dry down pretty good before feeding again..

Don't bother with run off metering... Adjust only what you put in to make any long term pH change..

Yes I learned my first valuable mistake by overwatering my seedlings. Ordered 15 seeds and only one has been growing and doing alright. Seems to be growing a bit slow and kinda growing awkward but that could have been from the first batch of coco I had laying around a long while. I bought a fresh brick and washed it like there was no tomorrow and cal mag soaked it for 48 hours so hopefully I see some signs of massive growth compared to what I’ve been seeing lol