BK’s shit show

[bk78]

Hmm I knew you had hooked it back to the wall. I had assumed if that didn't straighten them up that the inner squares of the trellis must have torn and broke, thus my suggestion to re-tie them back together(not a suggestion to hang it back to the wall...). I must have misunderstood what actually broke. If you can't get at them from the top to support them, then maybe feed some stakes up from the bottom and secure them. Spread the canopy back out in the process so the weight leans on the stakes.

Or just do whatever you want and chop them if you are ready. I was just trying to offer some thoughts.

Ok I have a plan. I do have a spare one of those suppprt rods I’m going to set up in the back and pull the stretched out upper trellis towards it and zip tie it there. Then if I can get them upright again I will get done stakes in there, but I don’t think they will help as they are only 6’ stakes and the plants are 7’+ so when I sink them into the buckets they will only be 5’ tall. I’ll give it a try though

 

[ooof-da]

Oooof

Uh oh..maybe I don’t understand but that grow looks freaking amazing to me. I look at it and say “ya someday I’ll understand how to make them look like that”. Y’all are in a different level I guess. Nothing meant by it.

 

[bk78]

Uh oh..maybe I don’t understand but that grow looks freaking amazing to me. I look at it and say “ya someday I’ll understand how to make them look like that”. Y’all are in a different level I guess. Nothing meant by it.

Oh you must have forgot to type anything, it just quoted nothing.

 

[2klude]

Going to run 2 of each and may even do a little Patrick schwayzee leaf strip SBS vs lollipop only

That would be an awesome side by side to do and finally done properly... all of the deleafing SBS i've seen have been using different phenos or completely different strains in the SBS, WTF kind of comparison is that.

RIP John Dalton #RoadHouse

 

[jzs147]

You are the chosen 1.
Looking sick man.

 

[bk78]

That would be an awesome side by side to do and finally done properly... all of the deleafing SBS i've seen have been using different phenos or completely different strains in the SBS, WTF kind of comparison is that.

RIP John Dalton #RoadHouse
View attachment 4996247

It’s on like donkey kong. I have a bunch of shit that needs to get done in the room after chop. I’m running 1” pvc for my drainage next round instead of that floppy tubing I currently have. I have to install the new fertigation system from @Sk-one. And do a full clean a reset.

My plans are to have the new plants in the room by November 1 and everything g else set up and installed.

 

[bk78]

Day 52


Obligatory lighter shots

Im actually surprised the upper leaves have lasted this long being so close to the lights getting hammered with ppfd.

 

[Brettman]

Is that a mini bic

 

[jzs147]

Day 52


Obligatory lighter shots

Im actually surprised the upper leaves have lasted this long being so close to the lights getting hammered with ppfd.


View attachment 4997847View attachment 4997848View attachment 4997849View attachment 4997850

How close are they?

 

[bk78]

How close are they?

6ish inches in some spots, running full boar since flip day.

 

[jzs147]

6ish inches in some spots, running full boar since flip day.

Fuck yeah nice no bleaching or anything?

 

[bk78]

Fuck yeah nice no bleaching or anything?

I mean I can’t really see shit since they are 7 feet fucking tall

Maybe there is, maybe there isn’t lol.

 

[davetanner]

So much info here.

 

[Wayne55]

It’s on like donkey kong. I have a bunch of shit that needs to get done in the room after chop. I’m running 1” pvc for my drainage next round instead of that floppy tubing I currently have. I have to install the new fertigation system from @Sk-one. And do a full clean a reset.

My plans are to have the new plants in the room by November 1 and everything g else set up and installed.

Your post is perfectly timed, I just picked up the ez-pz drain trays from the bucket company and I'm wondering how you will secure the pvc connections for your drainage? I have pvc cement but I really want to make plumbers tape work so I can disassemble if I should need to.

 

[bk78]

Your post is perfectly timed, I just picked up the ez-pz drain trays from the bucket company and I'm wondering how you will secure the pvc connections for your drainage? I have pvc cement but I really want to make plumbers tape work so I can disassemble if I should need to.

It’s not a high pressure system, there is no need to glue anything. The pvc press fit shouldn’t leak at all.

 

[lusidghost]

I use an inline pump for my drainage system. My trays are lifted about 4". Sometimes I have to finesse the lines to create initial suction because I made the mistake of buying 3/4" tubing instead of 1/2".

 

[rkymtnman]

I’m running 1” pvc for my drainage

don't you mean 25.4mm pvc???? lmao!! lookin' awesome as usual bk!!

 

[bk78]

don't you mean 25.4mm pvc???? lmao!! lookin' awesome as usual bk!!

Technically it’s 1.25” OD, 1” ID if ya want to be precise

 

[myke]

don't you mean 25.4mm pvc???? lmao!! lookin' awesome as usual bk!!

In Canada we measure in inches drive in kms play golf in yards and buy gas in litres.

 

[bk78]

Your post is perfectly timed, I just picked up the ez-pz drain trays from the bucket company and I'm wondering how you will secure the pvc connections for your drainage? I have pvc cement but I really want to make plumbers tape work so I can disassemble if I should need to.

Did you also get the run off pump with the trays?