BK’s shit show

Status
Not open for further replies.
bk78

bk78

Well-Known Member
Thundercat said:
Hmm I knew you had hooked it back to the wall. I had assumed if that didn't straighten them up that the inner squares of the trellis must have torn and broke, thus my suggestion to re-tie them back together(not a suggestion to hang it back to the wall...). I must have misunderstood what actually broke. If you can't get at them from the top to support them, then maybe feed some stakes up from the bottom and secure them. Spread the canopy back out in the process so the weight leans on the stakes.

Or just do whatever you want and chop them if you are ready. I was just trying to offer some thoughts.
Click to expand...
Ok I have a plan. I do have a spare one of those suppprt rods I’m going to set up in the back and pull the stretched out upper trellis towards it and zip tie it there. Then if I can get them upright again I will get done stakes in there, but I don’t think they will help as they are only 6’ stakes and the plants are 7’+ so when I sink them into the buckets they will only be 5’ tall. I’ll give it a try though
 
bk78

bk78

Well-Known Member
ooof-da said:
Uh oh..maybe I don’t understand but that grow looks freaking amazing to me. I look at it and say “ya someday I’ll understand how to make them look like that”. Y’all are in a different level I guess. Nothing meant by it.
Click to expand...
Oh you must have forgot to type anything, it just quoted nothing.
 
2klude

2klude

Well-Known Member
bk78 said:
Going to run 2 of each and may even do a little Patrick schwayzee leaf strip SBS vs lollipop only :lol:
Click to expand...
That would be an awesome side by side to do and finally done properly... all of the deleafing SBS i've seen have been using different phenos or completely different strains in the SBS, WTF kind of comparison is that.

RIP John Dalton #RoadHouse
1632707003168.png
 
Last edited:
bk78

bk78

Well-Known Member
2klude said:
That would be an awesome side by side to do and finally done properly... all of the deleafing SBS i've seen have been using different phenos or completely different strains in the SBS, WTF kind of comparison is that.

RIP John Dalton #RoadHouse
View attachment 4996247
Click to expand...
It’s on like donkey kong. I have a bunch of shit that needs to get done in the room after chop. I’m running 1” pvc for my drainage next round instead of that floppy tubing I currently have. I have to install the new fertigation system from @Sk-one. And do a full clean a reset.

My plans are to have the new plants in the room by November 1 and everything g else set up and installed.
 
W

Wayne55

Well-Known Member
bk78 said:
It’s on like donkey kong. I have a bunch of shit that needs to get done in the room after chop. I’m running 1” pvc for my drainage next round instead of that floppy tubing I currently have. I have to install the new fertigation system from @Sk-one. And do a full clean a reset.

My plans are to have the new plants in the room by November 1 and everything g else set up and installed.
Click to expand...
Your post is perfectly timed, I just picked up the ez-pz drain trays from the bucket company and I'm wondering how you will secure the pvc connections for your drainage? I have pvc cement but I really want to make plumbers tape work so I can disassemble if I should need to.
 
bk78

bk78

Well-Known Member
Wayne55 said:
Your post is perfectly timed, I just picked up the ez-pz drain trays from the bucket company and I'm wondering how you will secure the pvc connections for your drainage? I have pvc cement but I really want to make plumbers tape work so I can disassemble if I should need to.
Click to expand...
It’s not a high pressure system, there is no need to glue anything. The pvc press fit shouldn’t leak at all.
 
lusidghost

lusidghost

Well-Known Member
I use an inline pump for my drainage system. My trays are lifted about 4". Sometimes I have to finesse the lines to create initial suction because I made the mistake of buying 3/4" tubing instead of 1/2".
 
bk78

bk78

Well-Known Member
Wayne55 said:
Your post is perfectly timed, I just picked up the ez-pz drain trays from the bucket company and I'm wondering how you will secure the pvc connections for your drainage? I have pvc cement but I really want to make plumbers tape work so I can disassemble if I should need to.
Click to expand...
Did you also get the run off pump with the trays?
 
Status
Not open for further replies.
Top