Pauly1118
Well-Known Member
So I was thinking about sealing up the wood walls in my garage with liquid rubber. Install insulation then put a plastic barrier on top of that and then drywall, tape and mud. And then install mylar on the walls using wallpaper adhesive..& paint the floor flat white. so anyway I have been kinda planning this build for a while now and looking for opinions. Reason for wanting to use garage is ceiling height. Farthest out is 8' high and goes up to about 20' in the middle peak so I could fill her with monsters or pack it full with smaller girls SOG style..
------Equipment------
2x Air-Con 18k BTU / 23 SEER mini splits
155 PPD Dehumidifier
8x 16" Wall mount fans (2x per wall)
4x 8" A/c infinity inline fans w/ 4x 8" ac infinity carbon filters ( One per Corner \ air scrub) and run air ducting up into the drywalled ceiling and have the air flow back down into the room blowing down on plants / lights using duct grilles.
4-6 Burner CO2 generator w/ CO2 controller
Lights are something I can't decide on quiet yet. Obviously we all want top notch LEDs and I was eventually going to fork out tons of money and get maybe 8x 800 watt mars hydro's with the samsung diodes. At $800 a pop. That's $6400 plus tax. I will end up grabbing but how would let's say 12x 600 watt HPS lights do ?? Or what about 12x 615w CMH lights ? I been wanting to see what all the fuss is about on the CMHs. I hear 315s are equivalent to 1000w HPS?
LET ME KNOW HOW THIS SOUNDS.. THANKS
Oh and I also planned on maybe running coco one run because that's what I'm use to but I also been planning a DIY RDWC system.. POSSIBLY a 72 - 96x site system using 5 gallon square buckets with one or two 1 1/2 HP water chillers.
------Equipment------
2x Air-Con 18k BTU / 23 SEER mini splits
155 PPD Dehumidifier
8x 16" Wall mount fans (2x per wall)
4x 8" A/c infinity inline fans w/ 4x 8" ac infinity carbon filters ( One per Corner \ air scrub) and run air ducting up into the drywalled ceiling and have the air flow back down into the room blowing down on plants / lights using duct grilles.
4-6 Burner CO2 generator w/ CO2 controller
Lights are something I can't decide on quiet yet. Obviously we all want top notch LEDs and I was eventually going to fork out tons of money and get maybe 8x 800 watt mars hydro's with the samsung diodes. At $800 a pop. That's $6400 plus tax. I will end up grabbing but how would let's say 12x 600 watt HPS lights do ?? Or what about 12x 615w CMH lights ? I been wanting to see what all the fuss is about on the CMHs. I hear 315s are equivalent to 1000w HPS?
LET ME KNOW HOW THIS SOUNDS.. THANKS
Oh and I also planned on maybe running coco one run because that's what I'm use to but I also been planning a DIY RDWC system.. POSSIBLY a 72 - 96x site system using 5 gallon square buckets with one or two 1 1/2 HP water chillers.