Thermoelectric wine cooler drying and curing - DIY

MR.Towellie

MR.Towellie

Member
Hook Daddy said:
It wasn’t packed super full, I put it at 72 to start and see how it ran, and it worked just fine, so stepping down .5% from there. If it would have froze up I would have bumped it up to 76% and seen how that went.
Click to expand...
no i mean aren't u worried lowering it to 72% from the start can dry the buds too fast? i heard fast drying could result to "case hardening", or are u just experimenting? please enlighten me master.
 
Hook Daddy

Hook Daddy

Well-Known Member
MR.Towellie said:
no i mean aren't u worried lowering it to 72% from the start can dry the buds too fast? i heard fast drying could result to "case hardening", or are u just experimenting? please enlighten me master.
Click to expand...
Lol, I won’t dry them too fast, I’ll just keep dropping by .5% until 68% or so, then by 1% after that until 60%, so that’s around 16 days, then they’ll sit for a while until I’m ready for the next harvest. This time before bagging them up I’ll probably drop to 58% for a couple days, then bag it up. And thanks for reminding me, I forgot to drop them at all so far today.
 
T

Trust1337

Member
Hello, does anyone have any idea what the problem is? I am currently testing what the problem could be. Only the fridge is on and a fan, the dehumidifier is currently off.
 

Attachments

marzig

marzig

Well-Known Member
Trust1337 said:
Hello, does anyone have any idea what the problem is? I am currently testing what the problem could be. Only the fridge is on and a fan, the dehumidifier is currently off.
Click to expand...
Need to see more data. Can you show a days worth instead of a hour?
 
Billytheluther

Billytheluther

Well-Known Member
Small headsup guys and galls..
Carefull when pulling out your racks, you might have a nug fall on the ground.
When you go back to closing the fridge you thinks its shut but it aint.. perameters fall well off of curing specs..
Luckily there wasnt much in the fridge that wasnt jarred already..
 
Absorber

Absorber

Well-Known Member
amneziaHaze said:
super easy to program an arduino you can find online a diy smart plug. and then you program it to open power to 220V now you have anydevice smart. second you buy a humidity senzor for arudiono and tell the plug to ask it what temp it is now and to start or stop. then you can add humidifer and dehumidifier and just power them and copy cannatrol.
thats what it basicly is a simple fridge with 2 machines inside.even it has a flaw that you need to put wet spunges inside to rehumidify the air soo it can work
Click to expand...
You could use what some egg incubators use to humidify the incubator its a small peristaltic pump that adds water to a sponge near fan until it humidifies the enclosure again .
 
Tejashidrow

Tejashidrow

Well-Known Member
Hook Daddy said:
It works just like a regular fridge, you can buy a walk in restaurant style fridge at that point, but you don’t need a dehumidifier you need a massive humidifier or your buds are crispy in days. This has all been done, re-tested and verified by many sources, this is not new. Here is one of the better threads here on RIU for fridge drying if your interested, I’ve never tried it so really don’t know, I was told by many thermoelectric wine coolers were the way to go, and all my research lead me to thermoelectric, so that’s what I did, no regrets so far.

Drying in a fridge

Anyone tried this? I’m going to try it, been reading about it over the past few months and I feel confident it will work, it’s actually pretty well documented practise over at thc farmer and on 420 mag. I understand the science behind it and have seen it work, and I also understand why so...
www.rollitup.org
Click to expand...
No your buds will not dry out in days. It takes my compressor wine cooler set at 45f 2 weeks with no pizza boxes to reach optimal dryness% if the d
buds are left in, then yes they can over dry. But the compressor style works great, especially if your ambient air temp is outside the range for a thermoelectric one. Both get the same results just different paths to get there.
 
Hook Daddy

Hook Daddy

Well-Known Member
Tejashidrow said:
No your buds will not dry out in days. It takes my compressor wine cooler set at 45f 2 weeks with no pizza boxes to reach optimal dryness% if the d
buds are left in, then yes they can over dry. But the compressor style works great, especially if your ambient air temp is outside the range for a thermoelectric one. Both get the same results just different paths to get there.
Click to expand...
Ok, glad it works for you. When I tried it, it did not, and going by all the people that use the lotus cure method I assume it doesn’t work for most people. Perhaps it’s your local temps and humidity that work with a regular fridge. You should start a thread and explain what you do so others can learn and benefit from your experience.
 
B

Boymom1729

New Member
I had a dehumidifier on hand and stripped it down to just wires, I think I need to buy a transformer for this because I can’t see it being wise for me to splice these wires to the power cord.
 

Attachments

Hook Daddy

Hook Daddy

Well-Known Member
Boymom1729 said:
I had a dehumidifier on hand and stripped it down to just wires, I think I need to buy a transformer for this because I can’t see it being wise for me to splice these wires to the power cord.
Click to expand...
Where is the original power cord for the dehumidifier? There should have been a wall wart type transformers that came with the dehumidifier, or a power supply board inside. The TEC will not work if you use that AC power cord, you are correct.
 
B

Boymom1729

New Member
Seems like the circuit board is necessary for this to convert the voltage to something both can use. I know when I did HVAC we would have to step down voltage for UV lights and other components inside. I just assume the heating element would take more volts to run than a fan but my extent of electrical knowledge is being able to follow a wiring diagram.
 

Attachments

T

Trust1337

Member
Hook Daddy said:
I’m not sure exactly what you mean here. Do your plants need longer in the cooler, or growing?
Click to expand...
I have to harvest 2/10 plants earlier. The other 8 are finished a few days later

This means that the humidity in the fridge will be down by the time the other plants are ready
 
Nugnewbie

Nugnewbie

Well-Known Member
Boymom1729 said:
Seems like the circuit board is necessary for this to convert the voltage to something both can use. I know when I did HVAC we would have to step down voltage for UV lights and other components inside. I just assume the heating element would take more volts to run than a fan but my extent of electrical knowledge is being able to follow a wiring diagram.
Click to expand...
I may be wrong, but your dehu looks quite similar to the one I used with a seperate board for power. If you go to post #500 to about post #512, I believe you will find your answer there.
 
Hook Daddy

Hook Daddy

Well-Known Member
They should/
Trust1337 said:
I have to harvest 2/10 plants earlier. The other 8 are finished a few days later

This means that the humidity in the fridge will be down by the time the other plants are ready
Click to expand...
They should be fine putting them in a few days later. I would maybe wait if the buds in the cooler are almost finished, but a few days to a week will be fine, it will just extend the dry of the first ones in a bit.
 
B

Boymom1729

New Member
Hook Daddy said:
Where is the original power cord for the dehumidifier? There should have been a wall wart type transformers that came with the dehumidifier, or a power supply board inside. The TEC will not work if you use that AC power cord, you are correct.
Click to expand...
Should I just buy the one you mentioned? Seems like I would need to circuit board to power both. Posted pics in another thread but new and not sure if I responded to you
 
You must log in or register to reply here.
Top