Kief tumbler wanted

Johiem

Johiem

Well-Known Member
I bought one from France called the "pollinator" and it's performance was, erratic, difficult to control, but if you could get the damned thing out of "fresh hit Crack head" mode it would be pretty good. The motor relies on friction to slow it down. A stable speed motor and its golden. It was like a hundred bucks and I can tell it was 3d printed
 
Blue Pirate

Blue Pirate

Well-Known Member
Johiem said:
I bought one from France called the "pollinator" and it's performance was, erratic, difficult to control, but if you could get the damned thing out of "fresh hit Crack head" mode it would be pretty good. The motor relies on friction to slow it down. A stable speed motor and its golden. It was like a hundred bucks and I can tell it was 3d printed
Click to expand...
It seems there’s no middle ground, either super expensive or low grade quality. I’m considering a DYI…
 
medidedicated

medidedicated

Well-Known Member
Ionno if you seen me do this before. Using hands to agitate over a trim tray was fantastic enough for me over a tumbler. Its almost instant but have to find that fine line between getting as much as possible while not allowing impurities to eventually get through. Great for whatever but can take a step further and press it.

My highest return by dry weight is 37%. This stuff is crazy but its also easy to lose yield and/or get raunchyness from too much impurities. Though still great. I hit the bottom with a massage gun.
 

Attachments

conor c

conor c

Well-Known Member
medidedicated said:
Ionno if you seen me do this before. Using hands to agitate over a trim tray was fantastic enough for me over a tumbler. Its almost instant but have to find that fine line between getting as much as possible while not allowing impurities to eventually get through. Great for whatever but can take a step further and press it.

My highest return by dry weight is 37%. This stuff is crazy but its also easy to lose yield and/or get raunchyness from too much impurities. Though still great. I hit the bottom with a massage gun.
Click to expand...
You could always clean it up further with static electricity but you will lose a bit of yield but as you press lots of it for Roisin if I remember right it probably be a shout for your needs bud
 
medidedicated

medidedicated

Well-Known Member
Thats a good point its worth it because purity is what youre after with sift and bubble rosin. I just gave up on it for flower rosin I found was just fine and easier. I just dabbed some of that and holy cow I might try what you just said sometime to make sure its at least pure tasting. Yield is whatever, I dab it special occasion.
 
JeffWix

JeffWix

Well-Known Member
Hashman Kiefkowski (google)..he makes sift boxes and rollers. I remember him from Facebook...when they used to let me on there
 
Blue Pirate

Blue Pirate

Well-Known Member
Star Dog said:
I used a 150 micron initially then a 90 and 125.
I seen 5 gallon bubble bags yesterday for £20 for a 5 set I can't see why they wouldn't work for sifting pulled over a bucket + you can make hash with them.
Click to expand...
I have a 90 and 75 bag I’ve used with dry ice before…,
 
F

formularacer

Well-Known Member
formularacer said:
I picked up a set of sifting screens that fit a five gallon bucket.
Click to expand...
They don't fit 5 gallon buckets. My two cents is they dried after they measured them and are just a little undersize. But they don't sit on bucket like claimed.
Company response was the production supervisor checked them. My response was you need a new production supervisor.
 
You must log in or register to reply here.
Top